Load-sharing and redistribution in a one-story woodframe building

Journal of Structural Engineering

Volumn 129, Issue 9, 2003, Pages 1275-1284

  Paevere, Phillip J ^a   Foliente, Greg C ^a   Kasal, Bo ^b  

^a CSIRO   (Australia)

^b NORTH CAROLINA STATE UNIVERSITY   (United States)

Author keywords

Data collection; Framed structures; Full scale tests; Load distribution; Wooden structures

Indexed keywords

FRAMED STRUCTURES; FULL-SCALE TESTS; L-SHAPED WOODFRAME HOUSE; LOAD DISTRIBUTION; WOODEN STRUCTURES;

CYCLIC LOADS; FINITE ELEMENT METHOD; HOUSES; MATHEMATICAL MODELS; SHEAR WALLS; STRUCTURAL FRAMES; WOOD;

STRUCTURAL LOADS;

CYCLIC LOADS; DATA PROCESSING; FINITE ELEMENT ANALYSIS; FRAMES; HOUSES; MATHEMATICAL MODELS; WOOD;

EID: 3543050118     PISSN: 07339445     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0733-9445(2003)129:9(1275)     Document Type: Article

References (31)

1. Barton, A. D. (1997). "Performance of steel framed domestic structures subjected to earthquake loads." PhD thesis, Dept. of Civil and Environmental Engineering, Univ. of Melbourne, Australia.
2. Boughton, O. N. (1988). "Hull-scale structural testing of houses under cyclonic wind loads." Proc., 1988 Int. Conf. on Timber Engineering, Forest Products Research Society, Madison, Wis., 2-82-88.
3. Dolan, J. D. (1989). "The dynamic response of timber shear walls." PhD thesis, Dept. of Civil Engineering, Univ. of British Columbia, Vancouver. BC, Canada.
4. Dorey, D. B., and Schriever, W. R. (1957). "Structural test of a house under simulated wind and snow loads." ASTM Special Technical Rep. No. 210, ASTM, Philadelphia.
5. Dowrick, D. J. (1986). "Hysteresis loops for timber structures." Bull. New Zealand Natl. Soc. Earthquake Eng., 19(20), 143-52.
6. Fischer, D., Filiatrault, A., Folz, B., Uang, C.-M., and Seible, F. (2001). "Shake table tests of a two-story woodframe house." CUREE Publication No. W-06, CUREE, Richmond, Calif.
7. Foliente, G. C. (1996). "Issues in seismic performance testing and evaluation of timber structural systems." Proc., Int. Wood Engineering Conf., V. K. A. Gopu, ed., New Orleans, 1-29-36.
8. Foliente, G. C. (1998). "Design of timber structures subject to extreme loads." Progr. Struct. Eng. Mater., 1(3), 236-44.
9. Foliente, G. C., Karacabeyli, E., and Yasumura, M. (1998). "International test standards for joints in timber structures under earthquake and wind loads." Proc., Structural Engineers World Congress [SEWC '98-(CD-ROM)], Elsevier Science, New York, T-222-226.
10. Foliente, G. C., and Zacher, E. G. (1994). "Performance tests of timber structural systems under seismic loads." Analysis Design and Testing of Timber Structures Under Seismic Loads - Proc. Research Needs Workshop. Greg C. Foliente, ed., Univ. of California Forest Products Laboratory, Richmond, Calif., 21-86.
11. Gad, E. F. (1997). "Performance of brick-veneer steel-framed domestic structures under earthquake loading." PhD thesis, Dept. of Civil and Environmental Engineering, Univ. of Melbourne, Australia.
12. Hall, J. F. (2000). "The CUREE-Caltech woodframe project." Proc., World Conf., on Timber Engineering (CD-ROM), Univ. of British Columbia, Vancouver, BC, Canada.
13. ISO. (2000). "Timber structures - Joints made with mechanical fasteners - Quasi-static reversed-cyclic test method." ISO/WD 16670.3, Working Draft of ISO TC 165/SC/WG7. International Organization for Standardization, Geneva, Switzerland.
14. Kasal, B. (1992). "A nonlinear three-dimensional finite-element model of a light-frame structure." PhD thesis, Oregon State Univ., Corvallis, Ore.
15. Kircher, C., Reimerman, R., Whitman, R., and Arnold, C. (1997). "Estimation of earthquake losses to buildings." Earthquake Spectra, 13(4), 703-720.
16. Kohara, K., and Miyazawa, K. (1998). "Full-scale shaking table tests of two-story wooden houses." Proc., 5th World Conf. on Timber Engineering. Swiss Federal Institute of Technology, Lausanne, Switzerland. Presses Polytechniques et Universitaires Romandes, 2-548-555.
17. Leon, R. T., and Deierlein, G. G. (1996). "Considerations for the use of quasi-static testing." Earthquake Spectra. 12(1), 87-109.
18. NAHB Research Center. (2000). Residential Structural Design Guide: 2000 Edition - A State-of-the-Art Review and Application of Engineering Information for Light-Frame Homes. Apartments and Town-houses, U.S. Department of Housing and Urban Development. Washington, D.C.
19. Office of Emergency Services and EQE International. (1995). "The Northridge Earthquake of January 17, 1994: Report of Data Collection and Analysis." Governor's Office of Emergency Services, Sacramento, Calif.
20. Ohashi, Y., Sakamoto, I., and Kimura, M. (1998). "Shaking table tests of a real scale wooden house subjected to Kobe earthquake." Proc., 5th World Conf. on Timber Engineering, Swiss Federal Institute of Technology, Lausanne, Switzerland, Presses Polytechniques et Universitaires Romandes, 2-556-563.
21. Paevere, P. J. (2002). "Full-scale testing, modeling, and analysis of light-frame structures under lateral loading." PhD thesis, Dept. Civil and Environmental Engineering, The Univ. of Melbourne, Parkville, Victoria, Australia.
22. Phillips, T. L. (1990). "Load sharing characteristics of three-dimensional wood diaphragms." MS thesis, Washington State Univ., Pullman, Wash.
23. Phillips, T. L., Itani, R. Y., and McLean, D. I. (1993). "Lateral load sharing by diaphragms in wood-framed buildings." J. Struct. Eng., 119(5), 1556-1571.
24. Reardon, G. F. (1986). "Simulated cyclone wind loading of a brick veneer house." Technical Rep. No. 28. James Cook Cyclone Structural Testing Station, QLD, Australia.
25. Reardon, G. F. (1990). "Simulated cyclone wind loading of a nu-steel house." Technical Rep. No. 36, James Cook Cyclone Structural Testing Station, QLD, Australia.
26. Reardon, G. F., and Henderson, D. (1996). "Simulated wind loading of a two-story test house." Proc., Int. Wood Engineering Conf., V. K. A. Gopu, ed., New Orleans, 4-313-319.
27. Reardon, G. F., and Mahendran, M. (1988). "Simulated cyclone wind loading of a Melbourne style brick veneer house." Rep. No. 34, James Cook Cyclone Structural Testing Station, QLD, Australia.
28. Stewart, A. H., Kliewer, A., Goodman, J. R., and Salsbury, E. M. (1988). "Full-scale tests of manufactured houses under simulated wind load." Proc., 1988 Int. Conf. on Timber Engineering, Forest Products Research Society, Madison, Wis., 2-97-111.
29. Stewart, W. G. (1987). "The seismic design of plywood-sheathed shear walls." PhD thesis, Univ. of Canterbury, Christchurch, New Zealand.
30. Tuomi, R. L., and McCutcheon, W. J. (1974). "Testing of a full-scale house under simulated snow loads and wind loads." Research Paper FPL234, United States Department of Agriculture, Forest Products Laboratory, Madison, Wis.
31. Yamaguchi, N., and Minowa, C. (1998). "Dynamic performance of wooden bearing walls by shaking table test." Proc., 5th World Conf. on Timber Engineering, Swiss Federal Institute of Technology, Lausanne, Switzerland, Presses Polytechniques et Universitaires Romandes.