Vibration and stability of composite cylindrical shells containing a FG layer subjected to various loads

Structural Engineering and Mechanics

Volumn 27, Issue 3, 2007, Pages 365-391

  Sofiyev, A H ^a  

^a SULEYMAN DEMIREL UNIVERSITY   (Turkey)

Author keywords

Buckling loads; Composite cylindrical shell; FG layer; Frequency parameter; Vibration and stability

Indexed keywords

BUCKLING; CERAMIC MATERIALS; COMPOSITE BEAMS AND GIRDERS; FUNCTIONALLY GRADED MATERIALS; PARAMETER ESTIMATION; THICKNESS MEASUREMENT; VIBRATION ANALYSIS; VOLUME FRACTION;

BUCKLING LOADS; COMPOSITE CYLINDRICAL SHELLS; FREQUENCY PARAMETER; STABILITY ANALYSIS;

SHELLS (STRUCTURES);

EID: 35348955941     PISSN: 12254568     EISSN: None     Source Type: Journal    
DOI: 10.12989/sem.2007.27.3.365     Document Type: Article

References (70)

1. Babich, I.Y. and Kilin, V.I. (1985), "Stability of a three-layer orthotropic cylindrical shell under axial loading", Soviet Appl. Mech., 21, 566-669.
2. Biesheuvel, P.M. and Verweij, H. (2000), "Calculation of the composition profile of a functionally graded material produced by centrifugal casting", J. Am. Ceram. Soc., 83(4), 743-749.
3. Birman, V. (1995), "Buckling of functionally graded hybrid composite plates", In: Proc. 10th Conf. on Eng. Meek, Boulder, USA.
4. Chandrasekaran, K. (1977), "Torsional vibrations of some layered shells of revolution", J. Sound Vib., 55, 27-37.
5. Chung, H. (1981), "Free vibration analysis of circular cylindrical shells", J. Sound Vib., 14, 331-350.
6. Donnell, L.H. (1934a), "Stability of thin-walled tubes under torsion", NACA Tr-479.
7. Donnell, L.H. (1934b), "A new theory for the buckling of the thin cylinders under axial compression and bending", Trans Asme, 56, 795-806.
8. Feldman, E. and Aboudi, J. (1997), "Buckling analysis of functionally graded plates subjected to uniaxial loading", Compos. Struct., 38, 29-36.
9. Groves, J.F. and Wadley, H.N.G (1997), "Functionally graded materials synthesis via low vacuum directed vapor deposition", Compos. Part. B-Eng., 28(1-2), 57-69.
10. He, X.Q., Liew, K.M., Ng, T.Y. and Sivashanker, A. (2002), "A FEM model for the active control of curved FGM shells using piezoelectric sensor/actuator layers", Int. J. Num. Mech. Eng., 54(6), 853-870.
11. Jones, R.M. and Morgan, H.S. (1975), "Buckling and vibration of cross-ply laminated circular cylindrical shells", AIAA J., 13(5), 664-671.
12. Kardomateas, G.A. (1993), "Buckling of thick orthotropic cylindrical shells under external pressure", J. Appl. Mech., 60, 195-2002.
13. Kardomateas, G.A. (1993), "Stability loss in thick transversely isotropic cylindrical shells under axial compression", J. Appl. Mech., 60(2), 506-513.
14. Kardomateas, G.A. (1995), "Bifurcation of equilibrium in thick orthotropic cylindrical shells under axial compression", J. Appl. Mech., 62(1), 43-52.
15. Kieback, B., Neubrand, A. and Riedel, H. (2003), "Processing techniques for functionally graded materials", Mater. Sci. Eng. A-Struct. Material Prop. Micro-Struct. Process, 362(1-2), 81-105.
16. Kim, Y.S., Kardomateas, G.A. and Zureick, A. (1999), "Buckling of thick orthotropic cylindrical shells under torsion", J. Appl. Mech., 66, 41-50.
17. Kitipornchai, S., Yang, J. and Liew, K.M. (2004), "Semi analytical for nonlinear vibration of laminated FGM plates with geometric imperfections", Int. J. Solids Struct., 41, 2235-2257.
18. Kitipornchai, S., Yang, J. and Liew, K.M. (2006), "Random vibration of the functionally graded laminates in thermal environments", Comput. Meth. Appl. Mech. Eng., 195, 1075-1095.
19. Koizumi, M. (1993), "The concept of FGM", Ceramic Transactions, Functionally Gradient Mater., 34, 3-10.
20. Lam, K.Y. and Loy, C.T. (1995), "Analysis of rotating laminated cylindrical shells by different thin shell theories", J. Sound Vib., 186, 23-35.
21. Lei, M.M. and Cheng, S. (1969), "Buckling of composite and homogeneous isotropic cylindrical shells under axial and radial loading", J. Appl. Mech., 791-798.
22. Leissa, A.W. (1973), Vibration of Shells. NASA SP-288.
23. Liew, K.M., He, X.Q., Ng, T.Y. and Kitipornchai, S. (2002), "Active control of FGM shell subjected to a temperature gradient via piezoelectric sensor/actuator patches", Int. J. Num. Meth. Eng., 55, 653-668.
24. Liew, K.M., Ng, T.Y. and Zhao, X. (2002), "Vibration of axially loaded rotating cross-ply laminated cylindrical shells via ritz method", J. Eng Mech., 128(9), 1001-1007.
25. Liew, K.M., Yang, J. and Wu, Y.F. (2006), "Nonlinear vibration of a coating-FGM-substrate cylindrical panel subjected to a temperature gradient", Comput. Meth. Appl. Mech. Eng, 195(9-12), 1007-1026.
26. Loy, C.T., Lam, K.Y. and Reddy, J.N. (1999), "Vibration of functionally graded cylindrical shells", Int. J. Mech. Sci., 41, 309-324.
27. Lu, P., Lee, H.P. and Lu, C. (2005), "An exact solution for functionally graded piezoelectric laminates in cylindrical bending", Int. J. Mech. Sci., 47, 437-458
28. Mandal, P. and Calladine, C.R. (2000), "Buckling of thin cylindrical shells under axial compression", Int. J. Solid Struct., 37, 4509-4525.
29. Mao, R. and Lu, C.H. (1999), "Buckling analysis of a laminated cylindrical shell under torsion subjected to mixed boundary conditions", Int. J. Solids Struct., 36, 3821-3835.
30. Mirfakhraei, P. and Redekop, D. (1998), "Buckling of circular cylindrical shells by the differential quadrature method", Int. J. Pressure Vessels Piping, 75, 347-353.
31. Mises, R. (1929), "Der Kritische Aussendruck Für Allseits Belastete Cylindrisher Rohre, Festscher", Zum. 70 Geburtstage von prof A Stodola, Zürich, 418-432. (Germany)
32. Mortensen, A. and Suresh, S. (1995), "Functionally graded metals and metal ceramic composites", J. Proc. Int. Mater. Rev., 40(6), 239-265.
33. Na, K.S. and Kim, J.H. (2006), "Three-dimensional thermo-mechanical buckling analysis for functionally graded composite plates", Compos. Struct. in press
34. Ng, T.Y., He, X.Q. and Liew, K.M. (2002), "Finite element modeling of active control of functionally graded shells in frequency domain via piezoelectric sensors and actuators", Comput. Mech., 28(1), 1-9.
35. Ng, T.Y., Lam, K.Y., Liew, K.M. and Reddy, N.J. (2001), "Dynamic stability analysis of functionally graded cylindrical shells under periodic axial loading", Int. J. Solids Struct., 38, 1295-1309.
36. Park, H.C., Cho, C.M. and Choi, Y.H., (2001), "Torsional buckling analysis of composite cylinders", AIAA J., 39, 951-955.
37. Patel, B.P., Gupta, M.S., Loknath, M.S. and Kadu, C.P. (2005), "Free vibration analysis of a functionally graded elliptical cylindrical shells using higher-order theory", Compos. Struct., 69, 259-270.
38. Pelekh, B.L. and Mamchur, I.L. (1978), "Torsion of the laminated transversal isotropic cylindrical shells", Soviet Appl. Mech., 14, 24-28.
39. Pinna, R. and Ronalds, B.F. (2000), "Hydrostatic buckling of shells with various boundary conditions", J. Constr. Steel. Res., 56(1), 1-16.
40. Pitakthapanaphong, S. and Busso, E.P. (2002), "Self-consistent elasto-plastic stress solutions for functionally graded material systems subjected to thermal transients", J. Mech. Phys. Solids, 50, 695-716.
41. Pradhan, S.C. (2005), "Vibration suppression of FGM composite shells using embedded magnetostrictive layers", Int. J. Solids Struct., 42, 2465-2488.
42. Pradhan, S.C. and Reddy, J.N. (2004), "Vibration control of composite shells using embedded actuating layers", Smart Mater. Struct., 13, 1245-1257.
43. Pradhan, S.C., Loy, C.T., Lam, K.Y. and Reddy, J.N. (2000), "Vibration characteristics of functionally graded cylindrical shells under various boundary conditions", Appl. Acoust., 61(1), 119-129.
44. Put, S., Vleugels, J. and Van Der Biest, O. (2003), "Micro structural engineering of functionally graded materials by electrophoretic deposition", J. Mater. Process. Technol., 143, 572-577.
45. Ramirez, F., Heyliger, P.R. and Pan, E. (2006), "Static analysis of functionally graded elastic anisotropic plates using a discrete layer approach", Composites: Part B Eng., 37, 10-20.
46. Reddy, J.N. and Cheng, Z.Q. (2001), "Three-dimensional solutions of smart functionally graded plates", J. Appl. Mech., 68, 234-241.
47. Reddy, J.N. and Chin, C.D. (1998), "Thermo-mechanical analysis of functionally graded cylinders and plates", J. Thermal Stresses, 21, 593-602.
48. Sachenkov, A.V. and Baktieva, L.U. (1978), "Approach to the solution of dynamic stability problems of thin shells (in Russian)", Research on the Theory of Plates and Shells, Kazan State Univ., 13, 137-52.
49. Shahsiah, R. and Eslami, M.R. (2003), "Thermal buckling of functionally graded cylindrical shell", J. Thermal Stresses, 26, 277-294.
50. Sheinman, I., Shaw, D. and Simitses, G.J. (1983), "Nonlinear analysis of axially loaded laminated cylindrical shells", Comput. Struct., 16(1-4), 131-137.
51. Shen, H.S. (2002), "Post-buckling of shears deformable laminated cylindrical shell", Eng. Mech., 3, 296-306.
52. Shen, H.S. (2003), "Post-buckling analysis of pressure loaded functionally graded cylindrical shells in thermal environments", Eng. Struct., 25, 487-497.
53. Shen, H.S. and Noda, N. (2005), "Post-buckling of FGM cylindrical shell under combined axial and radial mechanical loads in thermal environments", Int. J. Solids Struct., 42, 4641-4662.
54. Shen, Z.J. and Nygren, M. (2002), "Laminated and functionally graded materials prepared by spark plasma sintering", Key. Eng. Mater, 206(2), 2155-2158.
55. Simitses, G.J. and Anastasiadis, J.S. (1991), "Buckling of axially loaded, moderately-thick, cylindrical laminated shells", Compos. Eng, 1(6), 375-391.
56. Sofiyev, A.H. (2003), "Dynamic buckling of functionally graded cylindrical shells under non-periodic impulsive loading", Acta Mech., 165, 153-162.
57. Sofiyev, A.H. (2004), "The stability of functionally graded truncated conical shells subjected to A-periodic impulsive loading", Int. J. Solids Struct., 41(13), 3411-3424.
58. Sofiyev, A.H., Deniz, A., Akçay, I.H. and Yusufoglu, E. (2006), "The vibration and stability of a three-layered conical shell containing a FGM layer subjected to axial compressive load", Acta Mech. (in press).
59. Tabiei, A. and Simitses, G.J. (1994), "Buckling of moderately thick laminated cylindrical shells under trsion". AIAA J., 21, 639-647.
60. Tan, D. (2000), "Torsional buckling analysis of thin and thick shells of revolution", Int. J. Solids Struct., 37, 3055-3078.
61. Touloukian, Y.S. (1967), Thermo-Physical Properties of High Temperature Solid Materials, New York: Macmillan.
62. Vinson, J.R. and Sierakowski, R.L. (1986), The Behavior of Structures Composed of Composite Material. Nijhoft, Dordrecht.
63. Vodenitcharova, T. and Ansourian, P. (1996), "Buckling of circular cylindrical shells subjected to uniform lateral pressure", Eng. Struct., 18, 604-614.
64. Volmir, A.S. (1967), Stability of Elastic Systems, Nauka: Moscow. English Translation: Foreign Tech. Division, Air Force Systems Command. Wright-Patterson Air Force Base, Ohio, AD628508.
65. Warburton, G.B. (1965), "Vibration of thin cylindrical shells", J. Mech. Eng. Sci., 1, 399-407.
66. Weingarten, V.I. (1964), "Free vibrations of multilayered cylindrical shells", Exp. Mech., 200-205.
67. Woo, J. and Mequid, S.A. (2001), "Nonlinear analysis of functionally graded plates and shallow shells", Int. J. Solids Struct., 38, 7409-7421.
68. Xue, J. and Hoo Fart, M.S. (2002), "Buckling of a non-uniform, long cylindrical shell subjected to external hydrostatic pressure", Eng. Struct., 24, 1027-1034.
69. Yang, J. and Shen, H.S. (2003), "Free vibration and parametric resonance of shear deformable functionally graded cylindrical panels", J. Sound. Vib., 261, 871-893.
70. Yang, J., Liew, K.M., Wu, Y.F. and Kitipornchai, S. (2006), "Thermo-mechanical post-buckling of FGM cylindrical panels with temperature-dependent properties", Int. J. Solids Struct., 43, 307-324.