High-order time integration applied to metal powder plasticity

International Journal of Plasticity

Volumn 24, Issue 1, 2008, Pages 17-54

  Hartmann, Stefan ^a   Bier, Wolfgang ^a  

^a UNIVERSITY OF KASSEL   (Germany)

Author keywords

Compressibility; Differential algebraic equations; Finite element method; Finite strain plasticity; Metal powder; Time adaptivity

Indexed keywords

ALGORITHMS; COMPRESSIBILITY; DIFFERENTIAL EQUATIONS; FINITE ELEMENT METHOD; PLASTICITY; VISCOPLASTICITY;

DIFFERENTIAL ALGEBRAIC EQUATIONS; FINITE ELEMENT FORMULATIONS; METAL POWDER PLASTICITY; TIME ADAPTIVITY;

POWDER METALS;

EID: 35348941686     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2007.01.014     Document Type: Article

References (69)

1. Abbo A., and Sloan S. A smooth hyperbolic approximation to the Mohr-Coulomb yield criterion. Computers & Structures 54 (1995) 427-441
2. Abou-Chedid, G.V., 1993. Experimental yield surface studies for the compaction of metal powders. Ph.D. Thesis, Massachusetts Institute of Technology.
3. Alexander R. Diagonally implicit Runge-Kutta methods for stiff O.D.E.'s. SIAM Journal on Numerical Analysis 14 (1977) 1006-1021
4. Anand L., and Gu C. Granular materials: constitutive equations and strain localization. Journal of the Mechanics and Physics of Solids 48 (2000) 1701-1733
5. Armero F., and Perez-Foguet A. On the formulation of closest-point projection algorithms in elastoplasticity - Part I: The variational structure. International Journal for Numerical Methods in Engineering 53 (2002) 331-374
6. Arnold M., and Frischmuth K. Solving problems with unilateral constraints by DAE methods. Mathematics and Computers in Simulation 47 (1998) 47-67
7. Ascher U.M., and Petzold L.R. Computer Methods for Ordinary Differential equations and differential-algebraic equations (1998), SIAM Society for Industrial and Applied Mathematics, Philadelphia
8. Aubertin M., and Li L. A porosity-dependent inelastic criterion for engineering materials. International Journal of Plasticity 20 (2004) 2179-2208
9. Bertsekas D. Constrained Optimization and Lagrange Multiplier Methods (1996), Athena Scientific
10. Bier W., and Hartmann S. A finite strain constitutive model for metal powder compaction using a unique and convex single surface yield function. European Journal of Mechanics Series A/Solids 25 (2006) 1009-1030
11. Bier, W., Dariel, M.P., Frage, N., Hartmann, S., Michailov, O., 2007. Die compaction of copper powder designed for material parameter identification. International Journal of Mechanical Science, doi:10.1016/j.ijmecsci.2006.09.026.
12. Bigoni D., and Piccolroaz A. Yield criteria for quasibrittle and frictional materials. International Journal of Solids and Structures 41 (2004) 2855-2878
13. Bonet J., and Wood R.D. Nonlinear Continuum Mechanics for Finite Element Analysis (2000), Cambridge University Press, Cambridge
14. Büttner J., and Simeon B. Runge-Kutta methods in elastoplasticity. Applied Numerical Mathematics 41 (2002) 443-458
15. Chtourou H., Gakwaya A., and Guillot M. Modeling of the metal powder compaction process using the cap model.Part II : Numerical implementation and practical applications. International Journal of Solids and Structures 39 (2002) 1077-1096
16. Chtourou H., Guillot M., and Gakwaya A. Modeling ot the metal powder compaction process using the cap model. Part I. Experimental material characterization and validation. International Journal of Solids and Structures 39 (2002) 1059-1075
17. Coube O., and Riedel H. Numerical simulation of metal powder die compaction with special consideration of cracking. Powder Metallurgy 43 (2000) 123-131
18. Crisfield M.A. Non-linear Finite Element Analysis of Solids and Structures vol. 1 (1991), Wiley, Chichester
19. da Silva M.G., and Ramesh K.T. The rate-dependent deformations of porous pure iron. International Journal of Plasticity 13 6-7 (1997) 587-610
20. Dennis J., and Schnabel R. Numerical Methods for Unconstrained Optimization and Nonlinear Equations (1996), SIAM Society for Industrial and Applied Mathematics, Philadelphia
21. Diebels S., Ellsiepen P., and Ehlers W. Error-controlled Runge-Kutta time integration of a viscoplastic hybrid two-phases model. Technische Mechanik 19 (1999) 19-27
22. DiMaggio F.L., and Sandler I.S. Material model for granular soils. Journal of the Engineering Mechanics Division. Proceedings of the American Society of Civil Engineers (1971) 935-950
23. Eckert S., Baaser H., Gross D., and Scherf O. A BDF2 integration method with stepsize control for elastoplasticity. Computational Mechanics 34 5 (2004) 377-386
24. Ehlers W. A single-surface yield function for geomaterials. Archive of Applied Mechanics 65 (1995) 246-259
25. Ellsiepen, P., 1999. Zeit- und ortsadaptive Verfahren angewandt auf Mehrphasenprobleme poröser Medien. Doctoral thesis, Institute of Mechanics II, University of Stuttgart, Report No. II-3.
26. Ellsiepen P., and Hartmann S. Remarks on the interpretation of current non-linear finite-element-analyses as differential-algebraic equations. International Journal for Numerical Methods in Engineering 51 (2001) 679-707
27. Fritzen, P., 1997. Numerische Behandlung nichtlinearer Probleme der Elastizitäts- und Plastizitätstheorie. Doctoral thesis, Department of Mathematics, University of Darmstadt.
28. Gu C., Kim M., and Anand L. Constitutive equations for metal powders: application to powder forming processes. International Journal of Plasticity 17 (2001) 147-209
29. Hairer E., and Wanner G. Solving Ordinary Differential Equations II. second revised ed. (1996), Springer, Berlin
30. Hairer E., Norsett S.P., and Wanner G. Solving Ordinary Differential Equations I. second revised ed. (1993), Springer, Berlin
31. Hartmann S. Computation in finite strain viscoelasticity: finite elements based on the interpretation as differential-algebraic equations. Computer Methods in Applied Mechanics and Engineering 191 13-14 (2002) 1439-1470
32. Hartmann S. A remark on the application of the Newton-Raphson method in non-linear finite element analysis. Computational Mechanics 36 2 (2005) 100-116
33. Hartmann, S., 2006a. TASA-FEM: Ein Finite-Elemente-Programm für raum- und zeitadaptive gekoppelte Strukturberechnungen. Technical Report 1/2006, Institute of Mechanics, University of Kassel, Kassel, Germany.
34. Hartmann S. A thermomechanically consistent constitutive model for polyoxymethylene: experiments, material modeling and computation. Archive of Applied Mechanics 76 (2006) 349-366
35. Hartmann, S., Wensch, J., 2007. Finite element analysis of viscoelastic structures using Rosenbrock-type methods. Computational Mechanics, doi:10.1007/s.00466-006-0117-y.
36. Hartmann S., Lührs G., and Haupt P. An efficient stress algorithm with applications in viscoplasticity and plasticity. International Journal for Numerical Methods in Engineering 40 (1997) 991-1013
37. Haupt P. On the concept of an intermediate configuration and its application to representation of viscoelastic-plastic material behavior. International Journal of Plasticity 1 (1985) 303-316
38. Haupt P., and Tsakmakis C. On the application of dual variables in continuum mechanics. Journal of Continuum Mechanics and Thermodynamics 1 (1989) 165-196
39. Haupt P., Kamlah M., and Tsakmakis C. On the thermodynamics of rate-independent plasticity as an asymptotic limit of viscoplasticity for slow processes. In: Besdo D., and Stein E. (Eds). Finite Inelastic Deformations - Theory and Applications (1992), IUTAM Symposium Hannover/Germany, Springer, Berlin 107-116
40. Hoyer W., and Schmidt J.W. Newton-type decomposition methods for equations arising in network analysis. ZAMM Zeitschrift für Angewandte Mathematik und Mechanik 64 (1984) 397-405
41. Khoei A.R., and Lewis R.W. Finite element simulation for dynamic large elastoplastic deformation in metal powder forming. Finite Elements in Analysis and Design 30 (1998) 335-352
42. Kraft T., and Riedel H. Numerical simulation of die compaction and sintering. Powder Metallurgy 45 3 (2002) 227-231
43. Kraft T., Riedel H., Stingl P., and Wittig F. Finite element simulation of die pressing and sintering. Advanced Engineering Materials 1 2 (1999)
44. Kreisselmeier G., and Steinhauser R. Systematische Auslegung von Reglern durch Optimierung eines vektoriellen Gütekriteriums. Regelungstechnik 3 (1979) 76-79
45. Kulkarni D.V., Tortorelli D., and Wallin M. A Newton-Schur alternative to the consistent tangent approach in computational plasticity. Computer Methods in Applied Mechanics and Engineering 196 (2007) 1169-1177
46. Lee E. Elastic-plastic deformation at finite strains. Journal of Applied Mechanics 36 (1969) 1-6
47. Lee E.H., and Liu D.T. Finite-strain elastic-plastic theory of application to plane wave analysis. Journal of Applied Physics 38 (1967) 19-27
48. Lewis R.W., and Khoei A.R. A plasticity model for metal powder forming processes. International Journal of Plasticity 17 (2001) 1659-1692
49. Luenberger D.G. Linear and nonlinear programming. second ed. (1989), Addison-Wesley, Reading
50. Mähler L., Ekh M., and Runesson K. A class of thermo-hyperelastic-viscoplastic models for porous materials: theory and numerics. International Journal of Plasticity 17 (2001) 943-969
51. Mandel J. Plasticité Classique et Viscoplasticité. Number 97 in CISM Courses (1972), Springer Verlag, Berlin
52. Nocedal J., and Wright S.J. Numerical Optimization (1999), Springer, New York
53. Oliver J., Oller S., and Cante J.C. A plasticity model for simulation of industrial powder compaction processes. International Journal of Solids and Structures 33 20-22 (1996) 3161-3178
54. Perez-Foguet A., and Armero F. On the formulation of closest-point projection algorithms in elastoplasticity-part II: Globally convergent schemes. International Journal for Numerical Methods in Engineering 53 (2002) 331-374
55. Perez-Foguet A., Rodriguez-Ferran A., and Huerta A. Efficient and accurate approach for powder compaction problems. Computational Mechanics 30 (2003) 220-234
56. Perzyna P. Fundamental problems in viscoplasticity. Advances in Applied Mechanics 9 (1966) 243-377
57. Rabbat N.B.G., Sangiovanni-Vincentelli A.L., and Hsieh H.Y. A multilevel Newton algorithm with macromodeling and latency for the analysis of large-scale nonlinear circuits in the time domain. IEEE Transactions on Circuits and Systems 26 (1979) 733-740
58. Redanz P. Numerical modelling of cold compaction of metal powder. International Journal of Mechanical Sciences 40 11 (1998) 1175-1189
59. Redanz P., and Tvergaard V. Analysis of shear band instabilities in sintered metals. International Journal of Solids and Structures 36 (1999) 3661-3676
60. Scherf O. Numerische Simulation inelastischer Körper. Fortschritt-Berichte VDI, Reihe 20 (Rechnerunterstützte Verfahren) Nr.321 (2000), VDI-Verlag, Düsseldorf
61. Schweizerhof, K., 1989. Quasi-Newton Verfahren und Kurvenverfolgungsalgorithmen für die Lösung nichtlinearer Gleichungssysteme in der Strukturmechanik. Schriftenreihe Heft 9, Karlsruhe, Institut für Baustatik, Universität Fridericiana Karlsruhe (TH). Herausgeber: U. Vogel, K. Schweizerhof.
62. Schwetlick H., and Kretzschmar H. Numerische Verfahren für Naturwissenschaftler und Ingenieure (1991), Fachbuchverlag, Leipzig
63. Shima S., and Oyane M. Plasticity theory for porous metals. International Journal of Mechanical Sciences 18 (1976) 285-291
64. Shultz G., Schnabel R., and Byrd R. A family of trust-region-based algorithms for unconstrained minimization with strong global convergence properties. SIAM Journal of Numerical Analysis 22 (1985) 23
65. Simo J.C., and Pister K.S. Remarks on rate constitutive equations for finite deformation problems: Computational implications. Computer Methods in Applied Mechanics and Engineering 46 (1984) 201-215
66. Simo J.C., and Taylor R.L. Consistent tangent operators for rate-independent elastoplasticity. Computer Methods in Applied Mechanics and Engineering 48 (1985) 101-118
67. Törnig W., and Spellucci P. Numerische Mathematik für Ingenieure und Physiker. second ed. 1 (1988), Springer-Verlag
68. Watson T.J., and Wert J.A. On the development of constitutive relations for metallic powders. Metallurgical Transactions 24A (1993) 2071-2081
69. Wittekindt, J. (1991). Die numerische Lösung von Anfangs-Randwertproblemen zur Beschreibung inelastischen Werkstoffverhaltens. Doctoral thesis, Department of Mathematics, University of Darmstadt.