A finite strain constitutive model for metal powder compaction using a unique and convex single surface yield function

European Journal of Mechanics, A/Solids

Volumn 25, Issue 6, 2006, Pages 1009-1030

  Bier, Wolfgang ^a   Hartmann, Stefan ^a  

^a UNIVERSITY OF KASSEL   (Germany)

Author keywords

Compressibility; Elastoplasticity; Interpolation; Metal powder compaction; Yield function

Indexed keywords

COMPACTION; COMPRESSIBILITY; DEFORMATION; GRANULAR MATERIALS; INTERPOLATION; STRAIN;

DEFORMATION GRADIENT; METAL POWDER COMPACTION; PLASTICITY MODEL;

POWDER METALS;

EID: 33750347235     PISSN: 09977538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.euromechsol.2006.01.002     Document Type: Article

References (64)

1. ABAQUS, 1998. ABAQUS Theory Manual, v.5.8 edition
2. Abbo A., and Sloan S. A smooth hyperbolic approximation to the Mohr-Coulomb yield criterion. Comput. & Structures 54 (1995) 427-441
3. Abou-Chedid, G.V., 1993. Experimental yield surface studies for the compaction of metal powders. PhD thesis, Massachusetts Institute of Technology
4. Armstrong, P., Frederick, C., 1966. A mathematical representation of the multiaxial Bauschinger effect. Technical Report General Electricity Generating Board, Report No.: RD/B/N731, Berceley Nuclear Laboratories
5. Arnold M., and Frischmuth K. Solving problems with unilateral constraints by DAE methods. Math. Comput. Simulation 47 (1998) 47-67
6. Arzt E. The influence of an increasing particle coordination on the densification of spherical powders. Acta Metall. 30 (1982) 1883-1890
7. Askeland D.R. The Science and Engineering of Materials (1994), PWS Publishing Company
8. Aubertin M., and Li L. A porosity-dependent inelastic criterion for engineering materials. Int. J. Plasticity 20 (2004) 2179-2208
9. Bakhshiani A., Khoei A.R., and Mofid M. A density-dependent endochronic plasticity for powder compaction processes. Comput. Mech. 34 (2004) 53-66
10. Bejarano A., Riera M.D., and Prado J.M. Simulation of the compaction process of a two-level powder metallurgical part. J. Mater. Process. Technol. 143-144 (2003) 34-40
11. Bigoni D., and Piccolroaz A. Yield criteria for quasibrittle and frictional materials. Int. J. Solids Structures 41 (2004) 2855-2878
12. Boyd S., and Vandenberghe L. Convex Optimization (2004), University Press
13. Carnavas, P.C., 1996. The effect of particle morphology on metal powder compaction. PhD thesis, University of Queensland
14. Carnavas P.C., and Page N.W. Elastic properties of compacted metal powders. J. Mater. Sci. 33 (1998) 4647-4655
15. Chtourou H., Gakwaya A., and Guillot M. Modeling of the metal powder compaction process using the cap model. Part II: Numerical implementation and practical applications. Int. J. Solids Structures 39 (2002) 1077-1096
16. Chtourou H., Guillot M., and Gakwaya A. Modeling of the metal powder compaction process using the cap model. Part I. Experimental material characterization and validation. Int. J. Solids Structures 39 (2002) 1059-1075
17. Coube O., and Riedel H. Numerical simulation of metal powder die compaction with special consideration of cracking. Powder Metallurgy 43 (2000) 123-131
18. de Boer R., and Dresenkamp H.T. Constitutive equations for concrete in failure state. J. Engrg. Mech. 115 8 (1989) 1591-1608
19. Desai C.S. Single surface yield and potential function plasticity models: a review. Computers & Geotechnics 7 (1989) 319-335
20. Desai C.S., and Salami M. Constitutive model for rocks. J. Geotech. Engrg. 113 5 (1987) 407-423
21. DiMaggio F.L., and Sandler I.S. Material model for granular soils. J. Engrg. Mech. Proc. ASCE 97 (1971) 935-950
22. Doraivelu S.M., Gegel H.L., Gunasekera J.S., Malas J.C., Morgan J.T., and Thomas Jr. J.F. A new yield function for compressible P/M materials. Int. J. Mech. Sci. 26 9/10 (1984) 527-535
23. Ehlers W. A single-surface yield function for geomaterials. Arch. Appl. Mech. 65 (1995) 246-259
24. Fleck N.A. On the cold compaction of powder. J. Mech. Phys. Solids 43 9 (1995) 1409-1431
25. Fleck N.A., Kuhn L.T., and McMeeking R.M. Yielding of metal powder bonded by isolated contacts. J. Mech. Phys. Solids 40 5 (1992) 1139-1162
26. Govindarajan R.M., and Aravas N. Deformation processing of metal powders: Part I - Cold isostatic pressing. Int. J. Mech. Sci. 36 4 (1994) 343-357
27. Green R.J. A plasticity theory for porous solids. Int. J. Mech. Sci. 14 (1972) 215-224
28. Gurson A.L. Continuum theory of ductile rupture by void nucleation and growth: Part I - yield criteria and flow rules for porous ductile media. J. Engrg. Mater. Technol. 99 (1977) 2-15
29. Häggblad H.-A. Constitutive models for powder materials. Powder Technol. 67 (1991) 127-136
30. Hartmann S. Computation in finite strain viscoelasticity: finite elements based on the interpretation as differential-algebraic equations. Computer Methods Appl. Mech. Engrg. 191 13-14 (2002) 1439-1470
31. Hartmann S., Tschöpe T., Schreiber L., and Haupt P. Large deformations of a carbon black-filled rubber. Experiment, optical measurement and parameter identification using finite elements. Eur. J. Mech. A Solids 22 (2003) 309-324
32. Haupt P. Continuum Mechanics and Theory of Materials. second ed. (2002), Springer, Berlin
33. Haupt P., and Tsakmakis C. On the application of dual variables in continuum mechanics. J. Continuum Mech. Thermodynam. 1 (1989) 165-196
34. Haupt P., and Tsakmakis C. Stress tensors associated with deformation tensors via duality. Arch. Mech. 48 (1996) 347-384
35. Helle A.S., Easterling K.E., and Ashby M.F. Hot-isostatic pressing diagrams: New developments. Acta Metall. 33 12 (1985) 2163-2174
36. Heyliger P.R., and McMeeking R.M. Cold plastic compaction of powders by a network model. J. Mech. Phys. Solids 49 (2001) 2031-2054
37. Khoei A., and Azami A. A single cone-cap plasticity with an isotropic hardening rule for powder materials. Int. J. Mech. Sci. 47 (2005) 94-109
38. Khoei A.R., Bakhshiani A., and Mofid M. An implicit algorithm for hypoelasto-plastic and hypoelasto-viscoplastic endochronic theory in finite strain isotropic-kinematic-hardening model. Int. J. Solids Structures 40 (2003) 3393-3423
39. Khoei A.R., and Lewis R.W. Finite element simulation for dynamic large elastoplastic deformation in metal powder forming. Finite Elements in Analysis and Design 30 (1998) 335-352
40. Khoei A.R., Mofid M., and Bakhshiani A. Modelling of powder compaction process using an endochronic model. J. Mater. Process. Technol. 130-131 (2002) 175-180
41. Kreisselmeier G., and Steinhauser R. Systematische Auslegung von Reglern durch Optimierung eines vektoriellen Gütekriteriums. Regelungstechnik 3 (1979) 76-79
42. Kuhn H.A., and Downey C.L. Deformation characteristics and plasticity theory of sintered powder materials. Int. J. Powder Metall. 7 1 (1971) 15-25
43. Lade P.V., and Kim M.K. Single hardening constitutive model for frictional materials, II. Yield criterion and plastic work contours. Computers & Geotechnics 6 (1988) 13-29
44. Lämmer H., and Tsakmakis C. Discussion of coupled elastoplasticity and damage constitutive equations for small and finite deformations. Int. J. Plasticity 16 (2000) 495-523
45. Lee E. Elastic-plastic deformation at finite strains. J. Appl. Mech. 36 (1969) 1-6
46. Lee E., and Liu D. Finite-strain elastic-plastic theory of application to plane wave analysis. J. Appl. Phys. 38 (1967) 19-27
47. Lewis R.W., and Khoei A.R. A plasticity model for metal powder forming processes. Int. J. Plasticity 17 (2001) 1659-1692
48. Lion A. Constitutive modelling in finite thermoviscoplasticity: a physical approach based on nonlinear rheological models. Int. J. Plasticity 16 (2000) 469-494
49. Luenberger D. Linear and Nonlinear Programming. second ed (1989), Addison-Wesley, Reading
50. Maccarini, M., 1987. Laboratory studies of weakly bonded artifical soil. PhD thesis, University of London
51. Madsen H.O., Sorensen J.D., and Olesen R. Optimal inspection planning for fatique damage of offshore structures. Proceedings of ICOSSAR '89, The 5th International Conference on Structural Safety and Reliability, Part III, August 7-11, 1989, San Francisco, CA, USA (1989), ASCE 2099-2106
52. Mandel J. Plasticité Classique et Viscoplasticité. CISM Courses and Lectures vol. 97 (1972), Springer-Verlag, Berlin
53. Martin C.L. Elasticity, fracture and yielding of cold compacted metal powders. J. Mech. Phys. Solids 52 (2004) 1691-1717
54. Nguyen, D., 1972. Un concept de rupture unifie pour les materiaux rocheux denses et poreux. PhD thesis, Ecole Polytechnique de Montreal-Universite de Montreal
55. Oliver J., Oller S., and Cante J.C. A plasticity model for simulation of industrial powder compaction processes. Int. J. Solids Structures 33 20-22 (1996) 3161-3178
56. Perez-Foguet A., Rodriguez-Ferran A., and Huerta A. Efficient and accurate approach for powder compaction problems. Comput. Mech. 30 (2003) 220-234
57. Redanz P. Numerical modelling of cold compaction of metal powder. Int. J. Mech. Sci. 40 11 (1998) 1175-1189
58. Shima S., and Oyane M. Plasticity theory for porous metals. Int. J. Mech. Sci. 18 (1976) 285-291
59. Shridhar I., and Fleck N.A. Yield behaviour of cold compacted composite powders. Acta Mater. 48 (2000) 3341-3352
60. Simo J., and Pister K. Remarks on rate constitutive equations for finite deformation problems: Computational implications. Computer Methods Appl. Mech. Engrg. 46 (1984) 201-215
61. Spellucci, P., 1999. DONLP2 short users guide. Technical report, Department of Mathematics, TU Darmstadt
62. Tsakmakis C. Kinematic hardening rules in finite plasticity. Part I: A constitutive approach. Continuum Mech. Thermodynam. 8 (1996) 215-231
63. Watson T.J., and Wert J.A. On the development of constitutive relations for metallic powders. Metallurgical Trans. A 24 (1993) 2071-2081
64. Yasufuku N., Murata H., and Hyodo M. Yield characteristics of anisotropically consolidated sand under low and high stresses. Soils and Foundations 31 1 (1991) 95-109