Thermal and mechanical characteristics of polylactide filaments drawn at different temperatures

Journal of the Textile Institute

Volumn 98, Issue 3, 2007, Pages 227-236

  Solarski, Samuel ^a   Ferreira, Manuela ^a   Devaux, Eric ^a  

^a GEMTEX   (France)

Author keywords

Mechanical and thermal characteristics; Melt spin drawing; Polylactide; X ray diffraction

Indexed keywords

MECHANICAL PROPERTIES; MELT SPINNING; SHRINKAGE; THERMODYNAMIC PROPERTIES;

LAMELLAR CRYSTALS; MELT SPIN DRAWING; MODULATED DIFFERENTIAL SCANNING CALORIMETRY; POLYLACTIDE;

PLASTIC FILAMENTS;

DRAWING; FILAMENT; MECHANICAL PROPERTY; POLYLACTIDE; TEMPERATURE; THERMAL PROPERTY;

EID: 35348895894     PISSN: 00405000     EISSN: 17542340     Source Type: Journal    
DOI: 10.1080/00405000701476179     Document Type: Article

References (27)

1. Agrawal, A. K. and Bhalla, R. (2003)pp. 479-503. Advances in the Production of poly(lactic acid) fibers. A Review, J. Macromol. Sci., Part C: Polym. Rev.
2. Auras, R., Harte, B. and Selke, S. (2004) An overview of polylactides as packaging materials.4, pp. 835-864. Macromol. Biosci.
3. Cicero, J. A., Dorgan, J. R., Dec, S. F. and Knauss, D. M. (2002) Phosphite stabilization effects on two-step melt spun fibers of polylactide. Polym. Degrad. Stab., 781, pp. 95-1058.
4. Cicero, J. A., Dorgan, J. R., Garett, J., Runt, J. and Lin, J. S. (2002) Effects of molecular architecture on two-step, melt-spun poly(lactic acid) fibers. J. Appl. Polym. Sci., 86, pp. 2839-2846.
5. De Clerck, K., Rahier, H., Van Mele, B. and Kiekens, P. (2003) Thermal properties relevant to the processing of PET fibers. J. Appl. Polym. Sci., 89, pp. 3840-3849.
6. Degée, P., Dubois, P., Jacobsen, S., Fritz, H.-G. and Jéôme, R. (1999) Beneficial effect of triphenylphosphine on the bulk polymerization of L, L-lactide promoted by 2-ethylhexanoic acid tin (II) salt. J. Polymer Sci.: Part A: Polym. Chem., 37, pp. 2413-2420.
7. Dorgan, J. R., Lehermeier, H. J., Palade, L. I. and Cicero, J. (2001) Polylactides: Properties and prospects of an environmentally benign plastic from renewable resources. Macromol. Symp., 175, pp. 55-66.
8. Drumright, R. E., Gruber, P. R. and Henton, D. E. (2000) Polylactic acid technology. Adv. Mat., 1223, pp. 1841-1846.
9. Eling, B., Gogolewski, S. and Pennings, A. J. (1982) Biodegradable materials of poly(L-lactic acid): 1. Melt-spun and solution-spun fibres. Polymer, 2311, pp. 1587-1593.
10. Fambri, L., Pegoretti, A., Fenner, R., Incardona, S. D. and Migliaseri, C. (1997) Biodegradable fibres of poly(L-lactic acid) produced by melt spinning. Polymer, 381, pp. 79-85.
11. Horacek, I. and Kalisek, V. (1994) Polylactide. I. Continuous dry spinning-hot drawing preparation of fibers. J. Appl. Polym. Sci., 54, pp. 1751-1757.
12. Horacek, I. and Kalisek, V. (1994) Polylactide. II. Discontinuous dry spinning-hot drawing preparation of fibers. J. Appl. Polym. Sci., 54, pp. 1759-1765.
13. Jacobsen, S., Fritz, H.-G., Degée, P., Dubois, P. and Jéôme, R. (2000) New developments on the ring opening polymerization of polylactide, industrial crops and products. 11, pp. 265-275.
14. Kim, K., Yu, M., Zong, X., Chiu, J., Fang, D., Seo, Y.-S., Hsiao, B. S., Chu, B. and Hadjiargyrou, M. (2003) Control of degradation rate and hydrophilicity in electrospun non-woven poly(D, L-lactide) nanofiber scaffolds for biomedical applications. Biomaterials, 24, pp. 4977-4985.
15. Leenslag, J. W. and Pennings, A. J. (1987) High-strength poly(L-lactide) fibres by a dry-spinning/hot-drawing process. Polymer, 2810, pp. 1695-1702.
16. Mezghani, K. and Spruiell, J. E. (1998) High speed melt spinning of poly(L-lactic acid) filaments. J. Polymer Sci.: Part B: Polym. Phys., 36, pp. 1005-1012.
17. Okuzaki, H., Kubota, I. and Kunugi, T. (1999) Mechanical properties and structure of the zone-drawn poly(L-lactic acid) fibers. J. Polymer Sci.: Part B: Polym. Phys., 37, pp. 991-996.
18. Postema, A. R., Luiten, A. H. and Pennings, A. J. (1990) High-strength poly(L-lactide) fibers by a dry-spinning/hot drawing process. I. Influence of the ambient temperature on the dry-spinning process. J. Appl. Polym. Sci., 49, pp. 1265-1274.
19. Postema, A. R., Luiten, A. H., Oostra, H. and Pennings, A. J. (1990) High-strength poly(L-lactide) fibers by a dry-spinning/hot drawing process. II. Influence of the extrusion speed and winding speed on the dry-spinning process. J. Appl. Polym. Sci., 49, pp. 1275-1288.
20. Schmack, G., Tändler, B., Vogel, R., Beyreuther, R., Jacobsen, S. and Fritz, H.-G. (1999) Biodegradable fibers of poly(L-lactide) produced by high-speed melt spinning and spin drawing. J. Appl. Polym. Sci., 73, pp. 2785-2797.
21. Schmack, G., Jehnichen, D., Vogel, R., Tändler, B., Beyreuther, R., Jacobsen, S. and Fritz, H.-G. (2001) Biodegradable fibres spun from poly(lactide) generated by reactive extrusion. J. Biotech., 86, pp. 151-160.
22. Schmack, G., Tändler, B., Optiz, G., Vogel, R., Komber, H., Häuler, L., Voigt, D., Weinmann, S., Heinemann, M. and Fritz, H.-G. (2004) High speed melt spinning of various grades of polylactides. J. Appl. Polym. Sci., 91, pp. 800-806.
23. Seppälä, J. V., Helminem, A. O. and Korhonen, H. (2004) Degradable polyesters through chain linking for packaging and biomedical applications. Macromol. Biosci., 4, pp. 208-217.
24. Solarski, S., Ferreira, M. and Devaux, E. (2005) Characterization of the thermal properties of PLA fibers by modulated differential scanning calorimetry. Polymer, 4625, pp. 11187-11192.
25. Tsuji, H., Ikada, Y., Hyon, S.-H., Kimura, Y. and Kitao, T. (1994) Stereocomplex formation between enantiomeric poly(lactic acid). VIII. Complex fibers spun from mixed solution of Poly(D-lactic acid) and poly(L-lactic acid). J. Appl. Polym. Sci., 51, pp. 337-344.
26. Takasaki, M., Ito, H. and Kikutani, T. (2003) Structure development of polylactides with various D-lactide contents in the high-speed melt spinning process. J. Macromol. Sci., Part B: Phys., 421, pp. 57-73.
27. Yuan, X., Mak, A. F. T., Kwok, K. W., Yung, B. K. O. and Yao, K. (2001) Characterization of poly(L-lactic acid) fibers produced by melt spinning. J. Appl. Polym. Sci., 81, pp. 251-260.