Small specimen test techniques for estimating the tensile property degradation of mod 9Cr-1Mo steel on thermal aging

Journal of Testing and Evaluation

Volumn 35, Issue 4, 2007, Pages 438-448

  Karthik, V ^a   Laha, K ^a   Parameswaran, P ^a   Kasiviswanathan, K V ^a   Raj, Baldev ^a  

^a INDIRA GANDHI CENTRE FOR ATOMIC RESEARCH   (India)

Author keywords

Ball indentation; Carbide coarsening; Correlation; Modified 9Cr 1Mo steel; Shear punch; Thermal aging; Ultimate tensile strength

Indexed keywords

CORRELATION METHODS; DEGRADATION; FAILURE ANALYSIS; HIGH TEMPERATURE EFFECTS; MICROSTRUCTURE; TENSILE STRENGTH; THERMAL AGING; BINARY ALLOYS; CARBIDES; CHROMIUM ALLOYS; INDENTATION; TENSILE TESTING;

BALL INDENTATION; CARBIDE COARSENING;

STEEL; THERMAL AGING;

BALL INDENTATION; BALL INDENTATION TESTS; CARBIDES COARSENING; CORRELATION; MODIFIED 9CR-1MO STEEL; SHEAR PUNCH; SMALL SPECIMEN; SMALL SPECIMEN TEST TECHNIQUE; TENSILE PROPERTIES DEGRADATION; ULTIMATE TENSILE STRENGTH;

EID: 35348854912     PISSN: 00903973     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (19)

1. Lucas, G. E., "Development of Small Specimen Mechanical Test Techniques," J. Nucl. Mater., Vol. 117, 1983, p. 327.
2. Haggag, F. M., et al, "Use of Automated Ball-Indentation Tests to Measure Flow Properties and Estimate Fracture Toughness of Metallic Materials," Applications of Automation Technology to Fracture and Fatigue Testing, ASTM STP 1092, A. A. Braun, N. E. Ashbaugh, and F. M. Smith, Eds., ASTM International, West Conshohocken, PA, 1990, pp. 188-208.
3. Lucas, G. E., Odette, G. R., and Sheckherd, J. W, "Shear Punch and Microhardness Tests For Strength And Ductility Measurements," The Use of Small-Scale Specimens for Testing Irradiated Materials, ASTM STP 888, W. R. Corwin and G. E. Lucas, Eds., ASTM International, West Conshohocken, PA, 1986, pp. 112-140.
4. Kasiviswanathan, K. V., et al, "Shear Punch Test with Online Acoustic Emission Monitoring for Assessment of Mechanical Properties," Small Specimen Test Techniques, 3rd Volume, ASTM STP 1329, W. R. Corwin, S. T. Rosenski, and E. Van Walle, Eds., ASTM International, West Conshohocken, PA, 1998, pp. 523-538.
5. Toloczko, M. B., et al, "Shear Punch Tests Performed Using a New Low Compliance Test Fixture," J Nucl. Mater, Vols. 307-311, 2002, pp. 1619-1623.
6. Hankin, G. L., Toloczko, M. B., Hamilton, M. L., and Faulkner, R. G., "Validation of the Shear Punch-Tensile Correlation Technique Using Irradiated Material," J. Nucl. Mater., Vols. 258-263, 1998, p. 1651.
7. Hamilton, M. L., Toloczko, M. B., and Lucas, G. E., "Recent Progress in Shear Punch Testing," Miniaturized Specimens for Testing of Irradiated Materials, H. Ullmaier and P. Jung, Eds., 1995, pp. 46-58.
8. Tabor, D., The Hardness of Metals, 1951.
9. Francis, H. A., "PhenomeNological Analysis Of Plastic Spherical Indentation," Trans. ASME, 1976, pp. 272-281.
10. Tirupataiah, Y., et al, "On the Constraint Factor Associated with the Indentation of Work Hardening Materials with a Spherical Ball," Metall. Trans. A, Vol. 22A, 1991, pp. 2375-2384.
11. Ahn, J.-H., et al., "Derivation of Plastic Stress-Strain Relationship from Ball-Indentations," J. Mater. Res., Vol. 16, No. 11, 2001, pp. 3170-3178.
12. Au, et al, "Flow Property Measurements from Instrumented Hardness Tests," Non-Destructive Evaluation in Nuclear Industry, American Society for Metals, Metal Park, OH, 1980, pp. 597-610.
13. Sneddon, I. N., "The relationship between load and penetrating in axisymmetric Boussinesq problem from a punch of arbitrary profile," International Journal of Engineering Science, Vol. 3, 1965, p. 47.
14. Norbury, A. L. and Samuel, T., "The Recovery and Sinking-in or Piling-up of Materials in the Brinell Test," Journal of Iron Steel Institute, Vol. 117, 1928, p. 673.
15. Karthik, V., et al., "Determination of Mechanical Property Gradients in Heat-Affected Zones of Ferritic Steel Weldments by Shear-Punch Tests," Small Specimen Test Techniques: 4th Volume, ASTM STP 1418, M. A. Sokolov, J. D. Landes, and G. E. Lucas, Eds., ASTM International, West Conshohocken, PA, 2002, pp. 380-405.
16. Chandravathi, K. S., Laha, K., BhanuSankara Rao, K., and Mannan, S. L., "Microstructure and Tensile Properties of Modified 9Cr-1Mo Steel,"Mater. Sci. Technol., Vol. 17, 2001, pp. 559-565.
17. Lucas, G. E., Sheckherd, J. W., Odette, G. R., and Panchandeeswaran, S., "Shear Punch Tests for Mechanical Property Measurements in TEM Disc Sized Specimen," J Nucl. Mater., Vols. 122-123, 1984, pp. 429-434.
18. Hankin, G. L., et al, "An Investigation Into the Origin and Nature of the Slope and x Axis Intercept of the Shear Punch-Tensile Yield Strength Correlation Using Finite Element Analysis," Effects of Radiation on Materials: 19th International Symposium, ASTM STP 1366, M. L. Hamilton, A. S. Kumar, S. T. Rosinski, and M. L. Grossbeck, Eds., ASTM International, West Conshohocken, PA, 1999.
19. Kishore, R. and Sinha, T. K., "Analysis of the Stress-Strain Curves of A Modified 9Cr-1Mo Steel by the Voce Equation," Metall. Mater. Trans. A, Vol. 27A, 1996, pp 3340-3343.