Determination of mechanical property gradients in heat-affected zones of ferritic steel weldments by shear-punch tests

ASTM Special Technical Publication

Volumn , Issue 1418, 2002, Pages 380-405

  Karthik, V ^a   Laha, K ^a   Kasiviswanathan, K V ^a   Raj, Baldev ^a  

^a INDIRA GANDHI CENTRE FOR ATOMIC RESEARCH   (India)

Author keywords

2.25 Cr 1 Mo similar weldments; 2.25 Cr 1 Mo 9 Cr 1 Mo dissimilar weldments; Correlation; Heat affected zones; Mechanical properties; Shear punch test

Indexed keywords

BAINITE; CHARACTERIZATION; CORRELATION METHODS; FERRITE; HEAT AFFECTED ZONE; MECHANICAL TESTING; MICROSTRUCTURE; SHEAR DEFORMATION; SHEAR STRESS; TENSILE PROPERTIES; WELDS;

DISSIMILAR WELDMENTS; SHEAR-PUNCH TESTS;

WELDED STEEL STRUCTURES;

EID: 0036407479     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp10834s     Document Type: Conference Paper

References (11)

1. Akselsen, O.M. and Rorvik, G., "Tensile Properties of Heat affected Zones of Medium Strength Low Carbon, C-Mn, and 2.25 Cr-1 Mo Steels," Materials Science and Technology, Vol. 6, 1990, pp. 383-389.
2. Lucas, G.E., "Development of Small Specimen Mechanical Test Techniques," Journal of Nuclear Materials, Vol. 117, 1983, p. 327.
3. Haggag, F.M., Server, W.L., Lucas, G.E., Odette, G.R., and Seckherd, J.W., "The Use of Miniaturized Tests to Predict Flow Properties and Estimate Fracture Toughness in Deformed Steel Plates," Journal of Testing and Evaluation, Vol. 18, No. 1, 1990, pp. 62-69.
4. Lucas, G.E., "Review of Small Specimen Test Techniques for Irradiation Testing," Metallurgical Transactions A, Vol. 214, 1990, p. 1105.
5. Lucas, G.E., Odette, G.R., and Sheckherd, J.W., "Shear punch and Microhardness Tests for Strength and Ductility Measurements," The Use of Small-Scale Specimens for Testing Irradiated Materials, ASTM STP 888, Eds., W.R. Corwin and G.E. Lucas, ASTM International, West Conshohocken, pp. 112-140.
6. Hamilton, M.L., Toloczko, M.B., and Lucas, G.E., "Recent Progress in Shear Punch Testing," Miniaturized Specimens for Testing of Irradiated Materials, Eds., Hans Ullmaier and Peter Jung, Jan 1995, pp. 46-58.
7. Lundin, C.D., Khan, K.K., and Yang, D., "Effect of Carbon Migration in Cr-Mo Weldments on Metallurgical Structure and Mechanical Properties," Report No. 1, Welding Research Council Bulletin 407.
8. Laha, K., Latha, S., Bhanu Sankara Rao, K., Mannan, S.L., and Sastry D.H., "A Comparison of Creep Behaviour of 2.25 Cr-1 Mo / 9 Cr-1 Mo Dissimilar Weld Joint with its Base and Weld Metals," Material Science and Technology. Vol. 17, 2001, pp. 1265-1272.
9. Kasiviswanathan, K.V., Hotta, S.K., Mukhopadhyay, C.K., and Baldev Raj., "Miniature Shear Punch Test with On-line Acoustic Emission Monitoring for Assessment of Mechanical Properties," Small Specimen Test Techniques, ASTM STP 1329, W.R. Corwin, S.T. Rosinski, and E.van Walle, Eds., ASTM International, West Conshohocken, PA, 1998, pp. 523-538.
10. Hankin, G.L., Toloczko, M.B., Hamilton, M.L., and Faulkner, R.G., "Validation of the Shear Punch-Tensile Correlation Technique using Irradiated Material," Journal of Nuclear Materials, Vol. 258-263, 1998, p. 1651.
11. Laha, K., Latha, S., Bhanu Sankara Rao, K., and Mannan, S.L., "Temperature Dependence of Tensile Properties of 2.25 Cr-1 Mo Steel Base, Weldments and Simulated Heat Affected Zone Structures," Transactions of the Indian Institute of Metals, Vol. 46, No. 2, April 1993, pp. 77-87.