Designing optimal volume fractions for functionally graded materials with temperature-dependent material properties

Journal of Applied Mechanics, Transactions ASME

Volumn 74, Issue 5, 2007, Pages 861-874

  Bobaru, Florin ^a  

^a UNIVERSITY OF NEBRASKA LINCOLN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

NON-GRADED LAYERS; NON-MONOTONIC PROFILES; OPTIMAL VOLUME FRACTIONS; VOLUME FRACTION SPLINE JUNCTION;

CERMETS; MICROMECHANICS; NUMERICAL ANALYSIS; OPTIMIZATION; THERMOELASTICITY; THERMOMECHANICAL TREATMENT;

FUNCTIONALLY GRADED MATERIALS;

EID: 35348839562     PISSN: 00218936     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2712231     Document Type: Article

References (42)

1. Pindera, M.-J., Aboudi, J., and Arnold, S., 1998, "Thermomechanical Analysis of Functionally Graded Thermal Barrier Coatings With Different Microstructural Scales," J. Am. Ceram. Soc., 81(6), pp. 1525-1536.
2. Horgan, C., and Chan, A., 1999, "Pressurized Hollow Cylinder or Disk Problem for Functionally Graded Isotropic Linearly Elastic Materials," J. Elast., 55(1), pp. 43-59.
3. Yildirim, B., and Erdogan, F., 2004, "Edge Crack Problems in Homogenous and Functionally Graded Material Thermal Barrier Coatings Under Uniform Thermal Loading," J. Therm. Stresses, 27(4), pp. 311-329.
4. Zimmerman, R. W., and Lutz, M. P., 1999, "Thermal Stresses and Thermal Expansion in a Uniformly Heated Functionally Graded Cylinder," J. Therm. Stresses, 22(2), pp. 177-188.
5. Nadeau, J., and Meng, X., 2000, "On the Response Sensitivity of an Optimally Designed Functionally Graded Layer," Composites, Part B, 31(4), pp. 285-297.
6. Kawamura, R., and Tanigawa, Y., 1998, "Multipurpose Optimization Problem of Material Composition for Thermal Stress Relaxation Type of a Functionally Graded Plate," JSME Int. J., Ser. A, 41(3), pp. 318-325.
7. Ootao, Y., Kawamura, R., Tanigawa, Y., and Nakamura, T., 1998, "Neural Network Optimization of Material Composition of a Functionally Graded Material Plate at Arbitrary Temperature Range and Temperature Rise," Arch. Appl. Mech., 68, pp. 662-676.
8. Tanaka, K., Tanaka, Y., Enomoto, K., Poterasu, V., and Sagano, Y., 1993, "Design of Thermoelastic Materials Using Direct Sensitivity and Optimization Methods. Reduction of Thermal Stresses in Functionally Gradient Materials," Comput. Methods Appl. Mech. Eng., 106(1-2), pp. 271-284.
9. Tanaka, K., Tanaka, Y., Watanable, H., Poterasu, V. F., and Sugano, Y., 1993, "Improved Solution to Thermoelastic Material Design in Functionally Gradient Materials; Scheme to Reduce Thermal Stresses," Comput. Methods Appl. Mech. Eng., 109(3-4), pp. 377-389.
10. Tanaka, K., Watanabe, H., Sugano, Y., and Poterasu, V., 1996, "Multicriterial Material Tailoring of a Hollow Cylinder in Functionally Gradient Materials: Scheme to Global Reduction of Thermoelastic Stresses," Comput. Methods Appl. Mech. Eng., 135(3-4), pp. 369-380.
11. Tanigawa, Y., Oka, N., Akai, T., and Kawamura, R., 1997, "One-Dimensional Transient Thermal Stress Problem for Nonhomogeneous Hollow Circular Cylinder and its Optimization of Material Composition for Thermal Stress Relaxation," JSME Int. J., Ser. A, 40(2), pp. 117-127.
12. Cho, J., and Choi, J., 2004, "A Yield-Criteria Tailoring of the Volume Fraction in Metal-Ceramic Functionally Graded Material," Eur. Phys. J. A, 23(2), pp. 271-281.
13. Goupee, A., and Vel, S., 2006, "Two-Dimensional Optimization of Material Composition of Functionally Graded Materials Using Meshless Analyses and a Genetic Algorithm," Comput. Methods Appl. Mech. Eng., 195, pp. 5926-5948.
14. Lipton, R., 2002, "Design of Functionally Graded Composite Structures in the Presence of Stress Constraints," Int. J. Solids Struct., 39, pp. 2575-2586.
15. Boussaa, D., 2000, "Optimizing a Compositionally Graded Interlayer to Reduce Thermal Stresses in a Coated Tube," C. R. Acad. Sci., Ser. IIb Mec., 328(3), pp. 209-215.
16. Turteltaub, S., 2002, ''Optimal Control and Optimization of Functionally Graded Materials for Thermomechanical Processes," Int. J. Solids Struct., 39(12), pp. 3175-3197.
17. Li, Y., Ramesh, K., and Chin, E., 2001, "Dynamic Characterization of Layered and Graded Structures Under Impulsive Loading," Int. J. Solids Struct., 38(34-35), pp. 6045-6061.
18. Kim, J.-H., and Paulino, G. H., 2005, "Consistent Formulations of the Interaction Integral Method for Fracture of Functionally Graded Materials," ASME J. Appl. Mech., 72(3), pp. 351-364.
19. Cho, J., and Oden, J. T., 2000, "Functionally Graded Material: A Parametric Study on Thermal-Stress Characteristics Using the Crank-Nicolson-Galerkin Scheme," Comput. Methods Appl. Mech. Eng., 188(1), pp. 17-38.
20. Reddy, J., 2000, "Analysis of Functionally Graded Plates," Int. J. Numer. Methods Eng., 47(1), pp. 663-684.
21. Shabana, Y. M., and Noda, N., 2002, "Thermo-Elasto-Plastic Stresses of Functionally Graded Material Plate With a Substrate and a Coating," J. Therm. Stresses, 25(12), pp. 1133-1146.
22. Sladek, J., Sladek, V., and Zhang, C., 2004, "A Local Biem for Analysis of Transient Heat Conduction With Nonlinear Source Terms in FGMS," Eng. Anal. Boundary Elem. 28(1), pp. 1-11.
23. Sutradhar, A., and Paulino, G. H., 2004, "The Simple Boundary Element Method for Transient Heat Conduction in Functionally Graded Materials," Comput. Methods Appl. Mech. Eng., 193(42-44), pp. 4511-4539.
24. Bobaru, F., and Jiang, H., 2004, "Optimization of Functionally Graded Materials With Temperature Dependent Properties: A Meshfree Solution," in: The XXI International Congress of Theoretical and Applied Mechanics, Warsaw, Poland, ISBN 83-89687-01-1.
25. Qian, L., Batra, R., and Chen, L., 2004, "Analysis of Cylindrical Bending Thermoelastic Deformations of Functionally Graded Plates by a Meshless Local Petrov-Galerkin Method," Comput. Mech., 33(4), pp. 263-273.
26. Sladek, J., Sladek, V., and Zhang, C., 2003, "Transient Heat Conduction Analysis in Functionally Graded Materials by the Meshless Local Boundary Integral Equation Method," Comput. Mater. Sci., 28(3-4), pp. 494-504.
27. Noda, N., 1999, "Thermal Stresses in Functionally Graded Materials," J. Therm. Stresses, 22(4-5), pp. 477-512.
28. Jin, Z.-H., and Batra, R., 1998, "Thermal Fracture of Ceramics With Temperature-Dependent Properties," J. Therm. Stresses, 21, pp. 157-176.
29. Liew, K., Yang, J., and Kitipornchai, S., 2004, "Thermal Post-Buckling of Laminated Plates Comprising Functionally Graded Materials With Temperature-Dependent Properties," ASME J. Appl. Mech., 71(6), pp. 839-850.
30. Belytschko, T., Lu, Y., and Gu, L., 1994, "Element-Free Galerkin Methods," Int. J. Numer. Methods Eng., 37(2), pp. 229-256.
31. Chen, J.-S., and Wang, H.-P., 2000, "New Boundary Condition Treatments in Meshfree Computation of Contact Problems," Comput. Methods Appl. Mech. Eng., 187(3), pp. 441-468.
32. Rabczuk, T., and Belytschko, T., 2005, "Adaptivity for Structured Meshfree Particle Methods in 2D and 3D," Int. J. Numer. Methods Eng., 63, pp. 1559-1582.
33. 2: A New Fixed-Grid Shape Optimization Method Based on the Element-Free Galerkin Meshfree Analysis," Struct. Multidiscip. Optim., 32(3), pp. 215-228.
34. Bobaru, F., and Mukherjee, S., 2002, "Meshless Approach to Shape Optimization of Linear Thermoelastic Solids," Int. J. Numer. Methods Eng., 53(4), pp. 765-796.
35. Reiter, T., and Dvorak, G., 1998, "Micromechanical Models for Graded Composite Materials: II. Thermomechanical Loading," J. Am. Soc. Mass Spectrom., 46, pp. 1655-1673.
36. Nocedal, J., and Wright, S., 1999, Numerical Optimization, Springer-Verlag, New York.
37. Chen, J.-S., Pan, C., Wu, C.-T., and Liu, W. K., 1996, "Reproducing Kernel Particle Methods for Large Deformation Analysis of Non-Linear Structures," Comput. Methods Appl. Mech. Eng., 139(1-4), pp. 195-227.
38. Li, S., and Liu, W. K., 2002, "Meshfree and Particle Methods and Their Applications," Appl. Mech. Rev., 55(1), pp. 1-34.
39. Suresh, S., and Mortensen, A., 1998, Fundamentals of Functionally Graded Materials, Institute of Materials, London.
40. Akima, H., 1970, "New Method of Interpolation and Smooth Curve Fitting Based on Local Procedures," J. Assoc. Comput. Mach., 17(4), pp. 589-602.
41. Bobaru, F., and Mukherjee, S., 2001, "Shape Sensitivity Analysis and Shape Optimization in Planar Elasticity Using the Element-Free Galerkin Method," Comput. Methods Appl. Mech. Eng., 190(32-33), pp. 4319-4337.
42. Shackelford, J., and Alexander, W., 2001, CRC Materials Science and Engineering Handbook, CRC Press, Boca Raton, FL.