Numerical simulation of Taylor impact tests

International Journal of Plasticity

Volumn 23, Issue 12, 2007, Pages 1979-2003

  Brünig, Michael ^a   Driemeier, Larissa ^b  

^a TU DORTMUND UNIVERSITY   (Germany)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

Large strains; Numerical simulations; Rate dependence; Taylor impact test; Thermo elastoplasticity

Indexed keywords

COMPUTER SIMULATION; NUMERICAL METHODS; STRAIN; STRESSES;

PHENOMENOLOGICAL INTERNAL VARIABLE THEORY; PLASTIC INTERNAL VARIABLE; TAYLOR IMPACT TEST; THERMO HYPERELASTIC EQUATION;

IMPACT TESTING;

EID: 34748813060     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2007.01.012     Document Type: Article

References (54)

1. Abed F.H., and Voyiadjis G.Z. Plastic deformation modeling of AL-6XN stainless steel at low and high strain rates and temperatures using a combination of bcc and fcc mechanisms of metals. Int. J. Plast. 21 (2005) 1618-1639
2. Anand L. Constitutive equations for hot-working of metals. Int. J. Plast. 1 (1985) 213-231
3. Argyris J.H., and Doltsinis J.S. On the natural formulation and analysis of large deformation coupled thermomechanical problems. Comput. Methods Appl. Mech. Eng. 25 (1981) 195-253
4. Asaro R.J. Micromechanics of crystals and polycrystals. Adv. Appl. Mech. 23 (1983) 2-115
5. Belytschko T., Moran B., and Kulkarni M. On the crucial role of imperfections in quasi-static viscoplastic solutions. J. Appl. Mech. 58 (1991) 658-665
6. Bever M.B., Holt D.L., and Titchener A.L. The stored energy of cold work. Prog. Mater. Sci. (1973) 1-190
7. Brown S.T., Kim K.H., and Anand L. An internal variable constitutive model for hot working of metals. Int. J. Plast. 5 (1989) 95-130
8. Brünig M. Numerical simulation of the large elastic-plastic deformation behavior of hydrostatic stress-sensitive solids. Int. J. Plast. 15 (1999) 1237-1264
9. Brünig M. Numerical analysis and large strain elastic-viscoplastic behavior of hydrostatic stress-sensitive metals. Int. J. Solids Struct. 38 (2001) 635-656
10. Brünig M., Berger S., and Obrecht H. Numerical simulation of the localization behavior of hydrostatic-stress-sensitive metals. Int. J. Mech. Sci. 42 (2000) 2147-2166
11. Canadija M., and Brnic J. Associative coupled thermoplasticity at finite strain with temperature-dependent material parameters. Int. J. Plast. 20 (2004) 1851-1874
12. Fotiu P.A., and Nemat-Nasser S. A universial integration algorithm for rate-dependent elastoplasticity. Comput. Struct. 59 (1996) 1173-1184
13. Green A.E., and Naghdi P.M. A general theory of an elasto-plastic continuum. Arch. Rat. Mech. Anal. 18 (1965) 251-281
14. Hashiguchi K., Okayasu T., and Saitoh K. Rate-dependent inelastic constitutive equation: the extension of elastoplasticity. Int. J. Plast. 21 (2005) 463-491
15. Helm D. Stress computation in finite thermoviscoplasticity. Int. J. Plast. 22 (2006) 1699-1727
16. Hu W., and Wang Z.R. Multiple-factor dependence of the yielding behavior to isotropic ductile materials. Comput. Mater. Sci. 32 (2005) 31-46
17. Hutchinson J.W. Bounds and self-consistent estimates for creep of polycrystalline materials. Proc. Royal Soc. London A 348 (1976) 101-127
18. Johnson G.R., and Cook W.H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. Proceedings of the 7th International Symposium (1983), Ballistics, The Hague, Netherlands 541-547
19. Johnson G.R., Hoegfeldt J.M., Lindholm U.S., and Nagy A. Response of various metals to large torsional strains over a large range of strain rates - I: Ductile metals. J. Eng. Mater. Technol. 105 (1983) 42-47
20. Johnson G.R., and Holmquist T.J. Evaluation of cylinder-impact test data for constitutive model constants. J. Appl. Phys. 64 (1988) 3901-3910
21. Jones S.E., Maudlin P.J., and Forster J.C. An engineering analysis of plastic wave propagation in the Taylor test. Int. J. Impact Eng. 19 (1997) 95-106
22. Jones S.E., Drinkard J.A., Rule W.K., and Wilson L.L. An elementary theory for the Taylor impact test. Int. J. Impact Eng. 21 (1998) 1-13
23. Kapoor R., and Nemat-Nasser S. Determination of temperature rise during high-strain rate deformation. Mech. Mater. 27 (1998) 1-12
24. -1. Int. J. Plast. 8 (1992) 397-424
25. Khan A.S., and Liang R. Behaviors of three BCC metals over a wide range of strain rates and temperatures: experiments and modeling. Int. J. Plast. 15 (1999) 1089-1109
26. Khan A.S., Suh Y.S., and Kazmi R. Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys. Int. J. Plast. 20 (2004) 2233-2248
27. Klopp R.W., Clifton R.J., and Shawki T.G. Pressure-shear impact and the dynamic viscoplastic response of metals. Mech. Mater. 4 (1985) 375-385
28. Lee E.H. Elastic-plastic deformation at finite strains. J. Appl. Mech. 36 (1969) 1-6
29. Lehmann Th. Some remarks on the decomposition of mechanical work. Int. J. Eng. Sci. 20 (1982) 281-288
30. Lemonds J., and Needleman A. Finite element analysis of shear localization in rate and temperature dependent solids. Mech. Mater. 5 (1986) 339-361
31. Litonski J. Plastic flow of a tube under adiabatic torsion. Bull. Acad. Pol. Sci. Ser. Sci. Tech. 25 (1977) 7-14
32. Maudlin P.J., Foster J.C., and Jones S.E. A continuum mechanics code analysis of steady plastic wave propagation in the Taylor test. Int. J. Impact Eng. 19 (1997) 231-256
33. Maudlin P.J., Bingert J.F., House J.W., and Chen S.R. On the modeling of the Taylor cylinder impact test for orthotropic textured materials: experiments and simulations. Int. J. Plast. 15 (1999) 139-166
34. Maudlin P.J., Bingert J.F., and Gray III G.T. Low-symmetry plastic deformation in BCC tantalum: experimental observations, modeling and simulations. Int. J. Plast. 19 (2003) 483-515
35. Miehe C. A theory of large-strain isotropic thermoplasticity based on metric transformation tensors. Arch. Appl. Mech. 66 (1995) 45-64
36. Mollica F., Rajagopal K.R., and Srinivasa A.R. The inelastic behavior of metals subject to loading reversal. Int. J. Plast. 17 (2001) 1119-1146
37. Nemat-Nasser S., Guo W.G., and Kihl D.P. Thermomechanical response of AL-6XN stainless steel over a wide range of strain rates and temperatures. J. Mech. Phys. Solids 49 (2001) 1823-1846
38. Pan J., and Rice J.R. Rate sensitivity of plastic flow and implications for yield-surface vertices. Int. J. Solids Struct. 19 (1983) 973-987
39. Rohr L., Nahme H., and Thoma K. A modified Taylor-test in combination with numerical simulations - a new approach for the determination of model parameters under dynamic loads. J. Phys. IV 110 (2003) 513-518
40. Rohr L., Nahme H., and Thoma K. Material characterization and constitutive modelling of ductile high strength steel for a wide range of strain rates. Int. J. Impact Eng. 31 (2005) 401-433
41. Rosakis P., Rosakis A.J., Ravichandran G., and Hodowany J. A thermodynamic internal variable model for the partition of plastic work into heat and stored energy in metals. J. Mech. Phys. Solids 48 (2000) 581-607
42. Rule W.K. A numerical scheme for extracting strength model coefficients from Taylor test data. Int. J. Impact Eng. 19 (1997) 797-810
43. Simo J.C., and Miehe C. Associative coupled thermoplasticity at finite strains: formulation, numerical analysis and implementation. Comp. Meth. Appl. Mech. Eng. 98 (1992) 41-104
44. Spitzig W.A., and Richmond O. The effect of pressure on the flow stress of metals. Acta Metall. 32 (1984) 457-463
45. Spitzig W.A., Sober R.J., and Richmond O. Pressure dependence of yielding and associated volume expansion in tempered martensite. Acta Metall. 23 (1975) 885-893
46. Spitzig W.A., Sober R.J., and Richmond O. The effect of hydrostatic pressure on the deformation behavior of maraging and HY-80 steels and its implications for plasticity theory. Metall. Trans. A 7A (1976) 1703-1710
47. Stevens J.B., and Batra R.C. Adiabatic shear bands in the Taylor impact test for a WHA rod. Int. J. Plast. 14 (1998) 841-854
48. Taylor G.I., and Quinney H. The latent heat remaining in a metal after cold working. Proc. Roy. Soc. London A 163 (1937) 157-181
49. Taylor G.I. The use of flat-ended projectiles for determining dynamic yield stress, I. Theoretical considerations. Proc. Roy. Soc. London A 194 (1948) 289-299
50. Teng X., Wierzbicki T., Hiermaier S., and Rohr I. Numerical prediction of fracture in the Taylor test. Int. J. Solids Struct. 42 (2005) 2929-2948
51. Voyiadjis G.Z., and Abed F.H. A coupled temperature and strain rate dependent yield function for dynamic deformations of bcc metals. Int. J. Plast. 22 (2006) 1398-1431
52. Whiffin A.C. The use of flat-ended projectiles for determining dynamic yield stress. II. Tests on various metallic materials. Proc. Roy. Soc. London A194 (1948) 300-322
53. Zaera R., and Fernandez-Saez J. An implicit consistent algorithm for the integration of thermoviscoplastic constitutive equations in adiabatic conditions and finite deformations. Int. J. Solids Struct. 43 (2006) 1594-1612
54. Zerilli F.J., and Armstrong R.W. Dislocation-mechanics-based constitutive relations for material dynamics calculations. J. Appl. Phys. 61 (1987) 1816-1825