Stress computation in finite thermoviscoplasticity

International Journal of Plasticity

Volumn 22, Issue 9, 2006, Pages 1699-1727

  Helm, Dirk ^a  

^a UNIVERSITY OF KASSEL   (Germany)

Author keywords

Backward Euler scheme; Geometric integration; Stored energy of cold work; Stress computation; Viscoplasticity

Indexed keywords

DEFORMATION; INTEGRATION; NUMERICAL ANALYSIS; STRESS ANALYSIS; THERMOMECHANICAL TREATMENT;

BACKWARD EULER METHOD; GEOMETRIC INTEGRATION; STORED ENERGY OF COLD WORK; STRESS COMPUTATION; THERMOVISCOPLASTICITY;

VISCOPLASTICITY;

EID: 33646176965     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2006.02.007     Document Type: Article

References (97)

1. Benallal A., Le Gallo P., and Marquis D. An experimental investigation of cyclic hardening of 316 stainless steel and of 2024 aluminium alloy under multiaxial loadings. Nuclear Engineering and Design 114 (1989) 345-353
2. Bertram A. An alternative approach to finite plasticity based on material isomorphisms. International Journal of Plasticity 52 (1998) 353-374
3. Bertram A. Finite thermoplasticity based on isomorphisms. International Journal of Plasticity 19 (2003) 2027-2050
4. Bever M., Holt D., and Titchener A. The Stored Energy of Cold Work. Progress in Materials Science vol. 17 (1973), Pergamon, Oxford
5. Bodner S.R., and Lindenfeld A. Constitutive modelling of the stored energy of cold work under cyclic loading. European Journal of Mechanics A - Solids 14 (1995) 333-348
6. Bruhns O., Lehmann T., and Pape A. On the description of transient cyclic hardening behaviour of mild steel CK15. International Journal of Plasticity 8 (1992) 331-359
7. Bucher A., Görke U.-J., and Kreißig R. A material model for finite elasto-plastic deformations considering a substructure. International Journal of Plasticity 20 (2004) 619-642
8. p in plasticity. Journal of Applied Mechanics 47 (1980) 672-675
9. Chaboche J.L. Viscoplastic constitutive equations for the description of cyclic and anisotropic behaviour of metals. Bulletin de L'Academie Polonaise des Sciences 25 (1977) 33-41
10. Chaboche J.-L. Cyclic viscoplastic constitutive equations, Part I: A thermodynamically consistent formulation. Journal of Applied Mechanics 60 (1993) 813-821
11. Chaboche J.-L. Cyclic viscoplastic constitutive equations, Part I: A thermodynamically consistent formulation, Part II: Stored energy - comparison between models and experiments. Journal of Applied Mechanics 60 (1993) 813-828
12. Chaboche J. Unified cyclic viscoplastic constitutive equations: development, capabilities, and thermodynamic framework. In: Krausz A., and Krausz K. (Eds). Unified Constitutive Laws of Plastic Deformation (1996), Academic Press, New York 1-68
13. Chaboche J., and Lemaitre J. Mechanics of Solid Materials (1990), Cambridge Press, Cambridge, New York
14. Chrysochoos A., Maisonneuve O., Martin G., Caumon H., and Chezeaux J. Plastic and dissipated work and stored energy. Nuclear Engineering and Design 114 (1989) 323-333
15. Coleman B., and Gurtin M. Thermodynamics with internal state variables. Journal of Chemical Physics 47 (1967) 597-613
16. Coleman B., and Noll W. The thermodynamics of elastic materials with heat conduction and viscosity. Archive for Rational Mechanics and Analysis 13 (1963) 167-178
17. Coleman B., and Owen D. On thermodynamics and elastic-plastic materials. Archive for Rational Mechanics and Analysis 59 (1975) 25-51
18. Deseri L., and Mares R. A class of viscoelastoplastic constitutive models based on the maximum dissipation principle. Mechanics of Materials 32 (2000) 389-403
19. Dettmer W., and Reese S. On the theoretical and numerical modelling of Armstrong-Frederick kinematic hardening in the finite strain regime. Computer Methods in Applied Mechanics and Engineering 193 (2004) 87-116
20. Eckart C. The thermodynamics of irreversible processes IV: the theory of elasticity and anelasticity. Physical Review 73 (1948) 373-382
21. Flory P. Thermodynamic relations for high elastic materials. Transactions of the Faraday Society 57 (1961) 829-838
22. Germain P., Nguyen Q.S., and Suquet P. Continuum thermodynamics. Transaction of the ASME 50 (1983) 1010-1020
23. Glaser, S., 1991. Berechnung gekoppelter thermomechanischer Prozesse. Ph.D. Thesis, Institut für Statik und Dynamik, Bericht Nr. 91/3, Universität Stuttgart.
24. Green A.E., and Naghdi P.M. A general theory of an elastic-plastic continuum. Archive for Rational Mechanics and Analysis 18 (1965) 251-281
25. Green A.E., and Naghdi P.M. Some remarks on elastic-plastic deformation at finite strain. International Journal of Engineering Science (1971) 1219-1229
26. Green A.E., and Naghdi P.M. The second law of thermodynamics and cyclic processes. Journal of Applied Mechanics 45 (1978) 487-492
27. p, material symmetry, and plastic irrotationality for solids that are isotropic-viscoplastic or amorphous. International Journal of Plasticity 21 (2005) 1686-1719
28. Hairer E. Geometric integration of ordinary differential equations on manifolds. BIT Numerical Mathematics 41 5 (2001) 996-1007
29. Hairer E., Lubich C., and Wanner G. Geometric Numerical Integration (2002), Springer, Berlin
30. Håkansson P., Wallin M., and Ristinmaa M. Comparison of isotropic hardening and kinematic hardening in thermoplasticity. International Journal of Plasticity 21 (2005) 1435-1460
31. Hartmann S., Lührs G., and Haupt P. An efficient stress algorithm with application in viscoplasticity and plasticity. International Journal for Numerical Methods in Engineering 40 (1997) 991-1013
32. Haupt P. Continuum Mechanics and Theory of Materials (2002), Springer, Berlin
33. Haupt P., and Kamlah M. Representation of cyclic hardening and softening properties using continuous variables. International Journal of Plasticity 11 (1995) 267-291
34. Haupt P., and Lion A. Experimental identification and mathematical modelling of viscoplastic material behavior. Continuum Mechanics and Thermodynamics 7 (1995) 73-96
35. Haupt P., and Tsakmakis C. On the application of dual variables in continuum mechanics. Continuum Mechanics and Thermodynamics 1 (1989) 165-196
36. Haupt P., Helm D., and Tsakmakis C. Stored energy and dissipation in thermoviscoplasticity. ZAMM 77 (1997) S119-S120
37. Helm, D., 1998. Experimentelle Untersuchung und phänomenologische Modellierung thermomechanischer Kopplungseffekte in der Metallplastizität. In: Hartmann, S., Tsakmakis, C. (Eds.), Aspekte der Kontinuumsmechanik. Festschrift zum 60. Geburtstag von Professor Peter Haupt. Berichte des Instituts für Mechanik, Institut für Mechanik der Universität Kassel, pp. 81-105.
38. Helm, D., 2001. Formgedächtnislegierungen: Experimentelle Untersuchung, phänomenologische Modellierung und numerische Simulation der thermomechanischen Materialeigenschaften. Ph.D. Thesis, Institut für Mechanik, Universität Gesamthochschule Kassel, Kassel.
39. Hibbitt, Karlsson & Sorensen, Inc., 2002a. ABAQUS Theory Manual. Version 6.3, Hibbitt, Karlsson & Sorensen, Inc.
40. Hibbitt, Karlsson & Sorensen, Inc., 2002b. ABAQUS/Explicit User's Manual. Version 6.3, Hibbitt, Karlsson & Sorensen, Inc.
41. Hill R. The Mathematical Theory of Plasticity (1950), Oxford University Press, Oxford
42. Hohenemser K., and Prager W. Über die Ansätze der Mechanik isotroper Kontinua. ZAMM 12 (1932) 216-226
43. Jansohn, W., 1997. Formulierung und Integration von Stoffgesetzen zur Beschreibung großer Deformationen in der Thermoplastizität und -viskoplastizität. Ph.D. thesis, Institut für Materialforschung, Forschungszentrum Karlsruhe.
44. Jou D., Casas-Vázquez J., and Lebon G. Extended Irreversible Thermodynamics (1996), Springer, Berlin/Heidelberg/New York
45. Kamlah M., and Haupt P. On the macroscopic description of stored energy and self-heating during plastic deformations. International Journal of Plasticity 13 (1998) 893-911
46. Kamlah M., and Tsakmakis C. Use of isotropic thermoelasticity laws in finite deformation viscoplasticity models. Continuum Mechanics and Thermodynamics 36 (1999) 73-88
47. Khan A.S., and Jackson K.M. On the evolution of isotropic hardening with finite plastic deformation. Part I: compression/tension loading of OFHC copper cylinders. International Journal of Plasticity 15 (1999) 1265-1275
48. Krempl E. An experimental study of room-temperature rate-sensitivity, creep and relaxation of AISI Type 304 stainless steel. Journal of Mechanics and Physics of Solids 27 (1979) 363-375
49. Krempl E. Models of viscoplasticity. Some comments on equilibrium (back) stress and drag stress. Acta Mechanica 69 (1987) 25-42
50. Krempl E., and Khan F. Rate (time)-dependent deformation behavior: an overview of some properties of metals and solid polymers. International Journal of Plasticity 19 (2003) 1069-1095
51. Kröner E. Kontinuumstheorie der Versetzungen und Eigenspannungen (1958), Springer, Berlin
52. Kröner E. Allgemeine Kontinuumstheorie der Versetzungen und Eigenspannungen. Archive for Rational Mechanics and Analysis 4 (1960) 273-334
53. Lee E. Elastic-plastic deformation at finite strains. Journal of Applied Mechanics 36 (1969) 59-67
54. Lee E., and Liu D. Finite-strain elastic-plastic theory with application to plane-wave analysis. Journal of Applied Physics 38 (1967) 19-27
55. Lehmann T. On a Generalized Constitutive Law in Thermoplasticity. Plasticity Today (1983), Elsevier, Amsterdam
56. Lehmann T., and Blix U. On the coupled thermo-mechanical process in the necking problem. International Journal of Plasticity 1 (1985) 175-188
57. Lion, A., 1994. Materialeigenschaften der Viskoplastizität, Experimente, Modellbildung und Parameteridentifikation. Ph.D. Thesis, Institut für Mechanik, Bericht Nr. 1/1994, Universität Gesamthochschule Kassel.
58. Lion A. Constitutive modelling in finite thermoviscoplasticity: a physical approach based on nonlinear rheological models. International Journal of Plasticity 16 (2000) 469-494
59. Liu I.-S. Continuum Mechanics (2002), Springer, Berlin
60. Lubliner J. A model of rubber viscoelasticity. Mechanics Research Communications 12 (1985) 93-99
61. Lubliner J. Plasticity Theory (1990), Macmillan Publishing Company, New York, London
62. Lührs G., Hartmann S., and Haupt P. On the numerical treatment of finite deformations in elastoviscoplasticity. Computer Methods in Applied Mechanics and Engineering 144 (1997) 1-21
63. Mandel J. Plasticité Classique et Viscoplasticité. CISM Courses vol. 97 (1972), Springer, Berlin
64. Maugin G., and Muschik W. Thermodynamics with internal variables Part I. General concepts. Part II. Applications. Journal of Non-Equilibrium Thermodynamics 19 (1994) 250-289
65. Meixner J., and Reik H. Thermodynamik der irreversiblen Prozesse. In: Flügge S. (Ed). Handbuch der Physik, Band III/2 (1959), Springer, Berlin
66. Miehe, C., 1988. Zur numerischen Behandlung thermomechanischer Prozesse. Ph.D. Thesis, Fachbereich Bauingenieur- und Vermessungswesen der Universität Hannover.
67. Miehe C. A constitutive frame of elastoplasticity at large strains based on the notion of a plastic metric. International Journal of Solids Structures 35 (1998) 3859-3897
68. Miehe C., and Stein E. A canonical model of multiplicative elasto-plasticity: formulation and aspects of the numerical implementation. European Journal of Mechanics A - Solids 11 (1992) 25-43
69. Mollica F., Rajagopal K.R., and Srinivasa A.R. The inelastic behavior of metals subject to loading reversal. International Journal of Plasticity 17 (2001) 1119-1146
70. Müller I., and Ruggeri. Rational Extended Thermodynamics (1998), Springer, Berlin/Heidelberg/New York
71. Oliferuk W., Gadaj S., and Grabski W. Energy storage during tensile deformation of Armco iron and austenitic steel. Materials Science and Engineering 70 (1985) 131-141
72. Perzyna P. The constitutive equations for rate sensitive plastic materials. Quarterly of Applied Mathematics 20 (1963) 321-332
73. Pinsky P., Ortiz M., and Taylor R. Operator split methods in the numerical solution of the finite deformation elastoplastic dynamic problem. Computer and Structures 17 (1983) 345-359
74. Rajagopal K.R., and Srinivasa A.R. Mechanics of the inelastic behavior of materials - Part 1: Theoretical underpinnings. International Journal of Plasticity 14 (1998) 945-967
75. Rajagopal K.R., and Srinivasa A.R. Mechanics of the inelastic behavior of materials - Part 2: Inelastic response. International Journal of Plasticity 14 (1998) 969-995
76. Rosakis P., Rosakis A.J., Ravichandran G., and Hodowany J. A thermodynamic internal variable model for the partition of plastic work into heat and stored energy in metals. Journal of the Mechanics and Physics of Solids 48 (2000) 581-607
77. Scheidler M., and Wright T. A continuum framework for finite viscoplasticity. International Journal of Plasticity 17 (2001) 1033-1085
78. Simo J. A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition: Part I: Continuum formulation. Computer Methods in Applied Mechanics and Engineering 66 (1988) 199-219
79. Simo, J., 1993. Recent developments in the numerical analysis of plasticity. In: Stein, E. (Ed.), Progress in Computational Analysis of Inelastic Structures, CISM Report No. 321, Udine, Springer Verlag, Wien, New York, pp. 115-173.
80. Simo J., and Hughes T. Computational Inelasticity (1998), Springer
81. Simo J., and Miehe C. Associative coupled thermoplasticity at finite strains formulation, numerical analysis and implementation. Computer Methods in Applied Mechanics and Engineering 98 (1992) 41-104
82. Simo J., and Pister K. Remarks on rate constitutive equations for finite deformation problems. Computer Methods in Applied Mechanics and Engineering 46 (1984) 201-215
83. Simo J., Taylor R., and Pister K. Variational and projection methods for the volume constraint in finite deformation elasto-plasticity. Computer Methods in Applied Mechanics and Engineering 51 (1985) 177-208
84. Taylor G., and Quinney M. The latent energy remaining in a metal after cold working. Proceedings of the Royal Society of London A 143 (1934) 307
85. Truesdell C. Rational Thermodynamics. second ed. (1984), Springer, New York, Berlin
86. Truesdell C., and Noll W. The Non-Linear Field Theories of Mechanics. In: Flügge S. (Ed). Handbuch der Physik, Band III/3 (1965), Springer, Berlin
87. Tsakmakis C. Kinematic hardening rules in finite plasticity Part I: a constitutive approach. Continuum Mechanics and Thermodynamics 8 (1996) 215-231
88. Tsakmakis, C., 1998. Energiehaushalt des elastisch-plastischen Körpers. Unpublished paper presented in the symposium: Aspekte der Kontinuumsmechanik und Materialtheorie. Kassel, 14 April.
89. Tsakmakis C. Description of plastic anisotropy effects at large deformations. Part I: restrictions imposed by the second law and the postulate of Il'iushin. International Journal of Plasticity 20 (2004) 167-198
90. Tsakmakis C., and Willuweit A. Use of the elastic predictor-plastic corrector method for integrating finite deformation plasticity laws. In: Hutter K., and Baaser H. (Eds). Deformation and Failure in Metallic Materials (2003), Springer, Berlin, Heidelberg, New York 79-108
91. von Mises R. Mechanik der festen Körper im plastisch-deformablen Zustand. Göttinger Nachrichten mathematisch-physikalischer Klasse (1913) 582-592
92. von Mises R. Mechanik der plastischen Formänderungen von Kristallen. ZAMM 8 (1928) 161-185
93. Wallin M., and Ristinmaa M. Deformation gradient based kinematic hardening model. International Journal of Plasticity 21 (2005) 2025-2050
94. Weber G., and Anand L. Finite deformation constitutive equations and a time integration procedure for isotropic, hyperelastic-viscoplastic solids. Computer Methods in Applied Mechanics and Engineering 79 (1990) 173-202
95. Wriggers P., Miehe C., Kleiber M., and Simo J. On the coupled thermomechanical treatment of necking problems via finite element methods. International Journal for Numerical Methods in Engineering 33 (1992) 869-883
96. Ziegler H. Some extremum principles in irreversible thermodynamics with applications to continuum mechanics. In: Sneddon I.N., and Koiter W. (Eds). Progress in Solid Mechanics vol. IV (1963), North-Holland, Amsterdam 93-193
97. Ziegler H. An Introduction to Thermomechanics (1977), North-Holland, Amsterdam