Modelling of the internal stress in dislocation cell structures

European Journal of Mechanics, A/Solids

Volumn 26, Issue 6, 2007, Pages 982-998

  Viatkina, E M ^a,b   Brekelmans, W A M ^a   Geers, M G D ^a  

^a EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

^b NETHERLANDS INSTITUTE FOR METALS RESEARCH   (Netherlands)

Author keywords

Dislocation cell structure; Geometrically necessary dislocations; Internal stress; Kinematic hardening; Strain path change effects

Indexed keywords

ANISOTROPY; MATHEMATICAL MODELS; PLASTIC DEFORMATION;

DISLOCATION CELL STRUCTURE; GEOMETRICALLY NECESSARY DISLOCATIONS; KINEMATIC HARDENING; STRAIN PATH CHANGE EFFECTS;

RESIDUAL STRESSES;

EID: 34548658654     PISSN: 09977538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.euromechsol.2007.05.001     Document Type: Article

References (64)

1. Abdi R., and Samrout H. A non-linear kinematic hardening model for a steel under complex loading. Computers and Structures 76 (2000) 675-681
2. Argon A., and Haasen P. A new mechanism of work hardening in the late stages of large strain plastic flow in (fcc) and diamond cubic crystals. Acta Metallurgica et Materialia 41 11 (1993) 3289-3306
3. Arsenlis A., and Parks D.M. Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density. Acta Materialia 47 5 (1999) 1597-1611
4. Barker I., Hansen N., and Ralph B. The development of deformation substructures in face-centred cubic metals. Materials Science and Engineering A 113 (1989) 449-454
5. Barlat F., Ferreira Duarte J., Gracio J., Lopes A., and Rauch E. Plastic flow for non-monotonic loading conditions of an aluminium alloy sheet sample. International Journal of Plasticity 19 (2003) 1215-1244
6. Bay B., Hansen N., and Kuhlmann-Wilsdorf D. Microstructural evolution in rolled aluminium. Materials Science and Engineering A 158 (1992) 139-146
7. Besseling J., and Van der Giessen E. Mathematical Modelling of Inelastic Deformation (1994), Applied Mathematics and Mathematical Computation, Chapman & Hall
8. Borbely A., Hoffmann G., Aernoudt E., and Ungar T. Dislocation arrangement and residual long-range internal stresses in copper single crystals at large deformations. Acta Materialia 45 1 (1997) 89-98
9. Borbely A., Maier H., Renner H., Straub S., Ungar T., and Blum W. Long-range internal stresses in steady-state subgrain structure. Scripta Metallurgica et Materialia 29 (1993) 7-12
10. Christodoulou N., Woo O., and MacEwen S. Effect of stress reversals on the work hardening behaviour of polycrystalline copper. Acta Metallurgica 34 8 (1986) 1553-1562
11. Chun B., Jinn J., and Lee J. Modelling of the Bauschinger effect for sheet metals, part I: Theory. International Journal of Plasticity 18 (2002) 571-595
12. Driver J., Jensen D., and Hansen N. Large strain deformation structures in aluminium crystals with rolling texture orientations. Acta Metallurgica et Materialia 42 9 (1994) 3105-3114
13. Estrin Y., Toth L., Molinari A., and Brechet Y. A dislocation-based model for all hardening stages in large strain deformation. Acta Materialia 46 15 (1998) 5509-5522
14. Fernandes J., Rodrigues D., Menezes L., and Vieira M. A modified Swift law for prestrained materials. International Journal of Plasticity 14 6 (1998) 537-550
15. Godfrey A., Jensen D., and Hansen N. Slip pattern, microstructure and local crystallography in an aluminium single crystal of copper orientation {112}{111}. Acta Materialia 46 3 (1998) 835-848
16. Goerdeler M., and Gottstein G. A microstructural work hardening model based on three internal state variables. Materials Science and Engineering A 309-310 (2001) 377-381
17. Hansen N., and Huang X. Dislocation structures and flow stress. Materials Science and Engineering A 234-236 (1997) 602-605
18. Hansen N., Huang X., and Hughes D. Microstructural evolution and hardening parameters. Materials Science and Engineering A 317 (2001) 3-11
19. Harder J. A crystallographic model for the study of local deformation processes in polycrystals. International Journal of Plasticity 15 (1999) 605-624
20. Hasegawa T., Yakou T., and Karashima S. Deformation behaviour and dislocation structures upon stress reversal in polycrystalline aluminium. Materials Science and Engineering 20 (1975) 267-276
21. Hecker M., Thiele E., and Hoste C. Investigating of the tensor character of mesoscopic internal stresses in tensile-deformed nickel single crystal by x-ray diffraction. Acta Materialia 50 (2002) 2357-2365
22. Huang X., and Hansen N. Grain orientation dependence of microstructure in aluminium deformed in tension. Scripta Materialia 37 1 (1997) 1-7
23. Hughes D., Liu Q., Chrzan D., and Hansen N. Scaling of the microstructural parameters: Misorientations of deformation induced boundaries. Acta Materialia 45 1 (1997) 105-112
24. Hull D., and Bacon D. Introduction to Dislocations (2001), Butterworth Heinemann, Oxford
25. Kröner E. Continuum Theory of Defects (1981), North-Holland Publishing Company pp. 217-315
26. Liu Q., and Hansen N. Geometrically necessary boundaries and incidental dislocation boundaries formed during cold deformation. Scripta Metallurgica et Materialia 32 8 (1995) 1289-1295
27. Liu Q., Jensen D., and Hansen N. Effect of grain orientation on deformation structure in cold-rolled polycrystalline aluminium. Acta Materialia 46 16 (1998) 5819-5838
28. McCabe R., Misra A., and Mitchell T. Experimentally determined content of a geometrically necessary dislocation boundary in copper. Acta Materialia 52 (2004) 705-714
29. Mollica F., Rajagopal K., and Srinivasa A. The inelastic behaviour of metals subject to loading reversal. International Journal of Plasticity 17 (2001) 1119-1146
30. Mughrabi H. Dislocation wall and cell structure and long-range internal stresses in deformed metal crystals. Acta Metallurgica 31 9 (1983) 1367-1379
31. Mughrabi H. A two-parameter description of heterogeneous dislocation distributions in deformed metal crystals. Materials Science and Engineering 85 (1987) 15-31
32. Mughrabi H. Self-consistent experimental determination of the dislocation line tension and long-range internal stresses in deformed copper crystals by analysis of dislocation curvatures. Material Science and Engineering A 309-310 (2001) 237-245
33. Mughrabi H., Ungar T., and Wilkens W. Long-range internal stresses and asymmetric x-ray line-broadening in tensile-deformed [001]-oriented copper single crystals. Philosophical Magazine A 53 6 (1986) 793-813
34. Müller M., Zehetbauer M., Borbely A., and Ungar T. Stage iv work hardening in cell forming materials, part i: features of the dislocation structure determined by x-ray line broadening. Scripta Materialia 35 12 (1996) 1461-1466
35. Mura T. Micromechanics of Defects in Solids (1987), Martinus Nijhoff Publishers
36. Myint-U T., and Debnath L. Partial Differential Equations for Scientists and Engineers (1987), North-Holland, Amsterdam
37. Nye J. Some geometrical relations in dislocated crystals. Acta Metallurgica 1 (1953) 153-162
38. Park N., and Parker B. The development of the deformed microstructure in commercially pure nickel. Materials Science and Engineering A 113 (1989) 431-439
39. Peeters, B., 2002. Multiscale modelling of the induced plastic anisotropy in (if) steel during sheet forming, Ph.D. thesis, Katholieke Universiteit Leuven
40. Peeters B., Kalidindi S., Teodosiu C., Van Houtte P., and Aernoudt E. Modeling microstructure-based anisotropy in bcc polycrystals during changing strain paths. Solid State Phenomena: Local Lattice Rotations and Disclinations in Microstructures of Distorted Crystalline Materials 87 (2002) 163-168
41. Peeters B., Kalidindi S., Teodosiu C., Van Houtte P., and Aernoudt E. A theoretical investigation of the influence of dislocation sheets on evolution of yield surfaces in single-phase bcc polycrystals. Journal of the Mechanics and Physics of Solids 50 4 (2002) 783-807
42. Peeters B., Seefeldt M., Teodosiu C., Kalidindi S., Van Houtte P., and Aernoudt E. Work-hardening/softening behaviour of bcc polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress-strain behaviour of an IF steel during two-stage strain paths. Acta Materialia 49 (2001) 1607-1619
43. Peeters B., Bacroix B., Teodosiu C., Van Houtte P., and Aernoudt E. Work-hardening/softening behaviour of bcc polycrystals during changing strain paths: II. TEM observations of dislocation sheets in an IF steel during two-stage strain paths and their representation in terms of dislocation densities. Acta Materialia 49 9 (2001) 1621-1632
44. Peeters B., Teodosiu C., Kalidindi S., Van Houtte P., and Aernoudt E. Modelling of the evolution of dislocation sheets during strain-path changes and their influence on the bauschinger effect of bcc polycrystals. Fifth European Mechanics of Materials Conference on Scale Transition from Atomistics to Continuum Plasticity vol. 85 (2001), Delft, The Netherlands 119-126
45. Schmitt J., Fernandes J., Gracio J., and Vieira M. Plastic behaviour of copper sheets during sequential tension tests. Materials Science and Engineering A 147 (1991) 143-154
46. Sedláček R. Internal stresses in dislocation wall structures. Scripta Metallurgica et Materialia 33 2 (1995) 283-288
47. Sedláček R., and Blum W. Internal stresses in dislocation subgrain structures. Computational Material Science 13 (1998) 148-153
48. Sedláček R., and Blum W. Microstructure-based constitutive law of plastic deformation. Computational Materials Science 25 (2002) 200-206
49. Sedláček R., and Forest S. Non-local plasticity at microscale: A dislocation-based and a Cosserat model. Physica Status Solidi B 221 (2000) 583-596
50. Sedláček R., and Hecker M. Stress field of tilted dislocation walls. Computational Materials Science 11 (1998) 270-276
51. Simo J., and Hughes T. Computational Inelasticity (1998), Springer-Verlag, Dover New York
52. Steinmann P. Views on multiplicative elastoplasticity and the continuum theory of dislocations. International Journal of Engineering Science 34 15 (1996) 1717-1735
53. Straub S., Blum W., Maier H., Ungar T., Borbely A., and Renner H. Long-range internal stresses in cell and subgrain structures of copper during deformation at constant stress. Acta Materialia 44 11 (1996) 4337-4350
54. Teodosiu C., and Hu Z. Evolution of the intragranular microstructure at moderate and large strains: Modelling and computational significance. In: Shen, and Dawson (Eds). Simulation of Materials Processing: Theory, Methods and Applications (1995), Balkema, Rotterdam
55. Ungar T., Mughrabi H., Ronnpagel D., and Wilkens M. X-ray line-broadening study of the dislocation cell structure in deformed [001]-oriented copper single crystals. Acta Metallurgica 32 3 (1984) 333-342
56. Viatkina, E., 2005. Micromechanical modelling of strain path dependency in fcc metals. Ph.D. thesis, Technishe Universiteit Eindhoven, www.mate.tue.nl/mate/publications/index.php/4/2005
57. Viatkina E., Brekelmans W., and Geers M. Strain path dependency in metal plasticity. Journal de Physique IV 105 (2003) 355-362
58. Viatkina, E., Brekelmans, W., Geers, M., 2007. Modelling the evolution of dislocation structures upon stress reversal. International Journal of Solids and Structures, in press, Online available, doi:10.1016/j.ijsolstr.2007.02.010
59. Wert J., Liu Q., and Hansen N. Dislocation boundaries and active slip systems. Acta Metallica et Materialia 43 11 (1995) 4153-4163
60. Wilson D., Zandrahimi M., and Roberts W. Effect of changes in strain path on work-hardening in cp aluminium and an al-cu-mg alloy. Acta Metallurgica et Materialia 38 2 (1990) 215-226
61. Winther G. Slip patterns and preferred dislocation boundary planes. Acta Materialia 51 (2003) 417-429
62. Winther G., Huang X., and Hansen N. Crystallographic and macroscopic orientation of planar dislocation boundaries - correlation with grain orientation. Acta Materialia 48 (2000) 2187-2198
63. Young C., Headley T., and Lytton J. Dislocation substructures formed during the flow stress recovery of high purity aluminum. Materials Science and Engineering 81 (1986) 391-407
64. Zimmer W., Hecker S., Rohr D., and Murr L. Large strain plastic deformation of commercial pure nickel. Metal Science 17 (1983) 198-206