Forces between solid surfaces across polymer melts as revealed by atomic force microscopy

Soft Materials

Volumn 5, Issue 2-3, 2007, Pages 49-60

  Butt, Hans Juergen ^a   Wang, Jijun ^a   Stark, Rdiger ^a   Kappl, Michael ^a   Wolf, Bernhard Anton ^b   Eckelt, John ^b   Knopf, Anja ^b  

^a MAX PLANCK INSTITUTE FOR POLYMER RESEARCH   (Germany)

^b JOHANNES GUTENBERG UNIVERSITY   (Germany)

Author keywords

Adhesion; Composites; Confined polymer; SFM; Surface force

Indexed keywords

ATOMIC FORCE MICROSCOPY; COMPOSITE MATERIALS; OLEFINS; PHASE EQUILIBRIA; THERMODYNAMICS;

CONFINED POLYMERS; SOLID SURFACES; SURFACE FORCES;

MOLTEN MATERIALS;

EID: 34548622885     PISSN: 1539445X     EISSN: 15394468     Source Type: Journal    
DOI: 10.1080/15394450701554411     Document Type: Article

References (48)

1. Israelachvili, J.N. (1992) Intermahcular and Surface Forces, 2nd edn.; Academic Press: London.
2. de Gennes, P.G. (1987) Interactions entre deux plaques via un polymere fondu. C.R. Acad. Sci., Paris 305: 1181-1184.
3. Ausserré, D. (1989) Polymer melt confined between, two plates. J. Phys., 50: 3021-3042.
4. ten Brinke, G., Ausserre, D., and Hadziioannou, G. (1988) Interaction between, plates in a polymer melt. J. Chem. Phys., 89: 4374-4380.
5. Leermakers, F.A.M. and Butt, H.-J. (2005) Surface forces in a confined polymer melt: self-consistent field analysis of full and restricted equilibrium cases. Phys. Rev. E, 72: 021807.
6. Horn, R.G., et al. (1989) Revaluation of forces measured across thin polymer films: nonequilibrium and pinning effects. J. Chem. Phys., 90: 6767-6774.
7. van Alsten, J. and Granick, S. (1990) Shear rheology in a confined geometry: polysiloxane melts. Macromolecules, 23: 4856-4862.
8. Cai, L.L. and Granick, S. (2001) Chains end-grafted in a theta-solvent and polymer melts: comparison of force-distance profiles. Adv. Colloid Interface Sci., 94: 135-150.
9. Montfort, J.P. and Hadziioannou, G. (1988) "Equlibrium" and dynamic behavior of thin films of a perfluorinated polyether. J. Chem. Phys., 88: 7187-7196.
10. Hirz, S.J., et al. (1992) Effect of substrate on shearing properties of ultrathin polymer films. Langmuir, 8: 328-333.
11. Hirz, S., et al. (1996) Static and kinetic friction of strongly confined polymer films under shear. Macromdecules, 29: 3970-3974.
12. Ruths, M. and Granick, S. (1999) Tribology of confined fromblin-Z perfluoropolyalkyl ethers: role of chain-end chemical Functionality. J. Phys. Chem. B, 103: 8711-8721.
13. Israelachvili, J.N. and Kott, S.J. (1988) Liquid structuring at solid interfaces as probed by direct force measurements: the transition from simple to complex liquids and polymer fluids. J. Chem. Phys., 88: 7162-7166.
14. Luengo, G., et al. (1997) Thin film rheology and tribology of confined polymer melts; contrasts with, bulk properties. Macromolecules, 30: 2482-2494.
15. Hu, H.W. and Granick, S. (1992) Viscoelastic dynamics of confined polymer melts. Science, 258: 1339-1342.
16. Hu, H.W., Granick, S., and Schweizer, K.S. (1994) Static and dynamical, structure of confined polymer films. J. Non-Crystalline Solids, 172-174: 721-728.
17. Peanasky, J., et al. (1994) Nanorheology of confined polymer melts. 3. weakly adsorbing surfaces. Langmuir, 10: 3874-3879.
18. Horn, R.G. and Israelachvili, J.N. (1988) Molecular organization and viscosity of a thin film of molten polymer between two surfaces as probed by force measurements. Macromolecules, 21: 2836-2841.
19. Horn, R.G., Smith, D.T., and Haller, W. (1989) Surface forces and viscosity of water measured between silica sheets. Chem. Phys. Lett., 162: 404-408.
20. Stark, R., et al. (2006) Quasi-static and hydrodynamic interaction between, solid surfaces in polyisoprene studied by atomic force microscopy. Polymer, 47: 7259-7270.
21. Fetters, LJ., et al. (1999) Packing length influence in linear polymer melts on the entanglement, critical, and reptation weights. Macromalecules, 32: 6847-6851.
22. Creton, C., Brown, H.R., and Shull, K.R. (1994) Molecular weight effects in chain pullout. Macromolecules, 27: 3174-3183.
23. Faller, R. and Reith, D. (2003) Properties of poly(isoprene): model building in the melt and in solution. Macromolecules, 36: 5406-5414.
24. Read, D.J. (2004) Calculation of scattering from stretched copolymers using tube model: incorporation of the effect of elastic inhomogeneities. Macromolecules, 37: 5065-5092.
25. Schulz, G. V. and Haug, A. (1962) Thermodynamik und struktur in lösungen von polydimethylsiloxanen. Zeischr. Physikalische Chemie, 34: 328-345.
26. Higgins, J.S., Dodgson, K., and Semlyen, J.A. (1979) Studies of cyclic and linear poly(dimethyl siloxanes): 3. neutron scattering measurements of the dimensions of ring and chain polymers. Polymer, 20: 553-558.
27. Granick, S. and Hu, H.W. (1994) Nanorheology of confined polymer melts. 1. linear shear response at strongly adsorbing surfaces. Langmuir, 10: 3857-3866.
28. Evmenenko, G., et al. (2006) Conformational rearrangements in interfacial, region of polydimethylsiloxanes melt films. Polymer, 47: 878-882.
29. Sun, G., et al. (2004) Equilibrium interaction of solid surfaces across polymer melts of poly(dimethyl siloxane). Langmuir, 20: 8030-8034.
30. Sun, C., Kappl, M., and Butt, H.-J. (2004) Confined polymer melts studied by atomic force microscopy. Colloids & Surfaces A, 250: 203-209.
31. Hutter, J.L. and Bechhoefer, J. (1993) Calibration of atomic-force microscope tips. Rev. Sci. Instrum., 64: 1868-1873.
32. Butt, H.-J. and Jaschke, M. (1995) Calculation of thermal noise in atomic force microscopy. Namtechnology, 6: 1-7.
33. Clark, S.C., WaIz, J.Y., and Ducker, W.A. (2004) Atomic force microscopy colloid-probe measurements with explicit measurement of particle-solid separation. Langmuir, 20: 7616-7622.
34. Butt, H.-J., Cappella, B., and Kappl, M. (2005) Force measurements with the atomic force microscope: technique, interpretation and applications. Surf. Sci, Rep., 59: 1-152.
35. Butt, H.-J., Graf; K., and Kappl, M. (2003) Physics and Chemistry of Interfaces; Wiley-VCH: Berlin, 361. pp.
36. Dadmun, M.D. (1996) Macromolecules, 29: 3868.
37. de Gennes, P.G. (1987) Polymers at an interface; a simplified view. Adv. Colloid Interface Sci., 27: 189-209.
38. Dolan, A.K. and Edwards, S.F. (1974) Theory of the stabilization of colloids by adsorbed polymer. Proc. R. Soc. London A, 337: 509-516.
39. Milner, ST., Witten, T.A., and Cates, M.E. (1988) Theory of grafted polymer brush. Macromolecules, 21: 2610-2619.
40. Patel, S., Tirrell, M., and Hadziioannou, G. (1988) A simple model for forces between surfaces bearing grafted polymers applied to data on adsorbed copolymers. Colloids & Surf., 31: 157-179.
41. Tsige, M., et al. (2003) Interactions and structure of poly(dimethylsiloane) at silicon dioxide surfaces: electronic structure and molecular dynamics studies. J. Chem. Phys., 118: 5132-5142.
42. Ash, S.G. and Findenegg, G.H. (1971) Calculation of the interaction energy between, two parallel adsorbing planes immersed in a solution composed of molecules of different size. Trans. Faraday Soc., 67: 2122.
43. Taunton, H.J., et al. (1990) Interactions between surfaces bearing end-adsorbed chains in a good solvent. Macromolecules, 23: 571-580.
44. Klein, J., Perahia, D., and Warburg, S. (1991) Forces between polymer-bearing surfaces undergoing shear. Nature, 352: 143-145.
45. Kumacheva, E., et al. (1993) Brush formation from mixtures of short and long end-functionalized chains in a good solvent. Macromolecules, 26: 6477-6482.
46. Sun, G., et al. (2005) Interaction between, solid surface across PDMS: influence of chain length and end group. Composite Interfaces, 12: 805-815.
47. Stark, R., Kappl, M., and Butt, H.-J. (2007) Interaction of solid surfaces across binary mixture of polymer melts. Macromolecules, 40: 4088-4091.
48. Wang, J., et al. (2007) Interaction between solid surfaces in a melt of end-functionalized polymers. Macromolecules, 40: 2520-2523.