Modeling the influence of process parameters and additional heat sources on residual stresses in laser cladding

Journal of Thermal Spray Technology

Volumn 16, Issue 3, 2007, Pages 355-373

  Brüner, Frank ^a   Lepski, D ^b   Beyer, E ^b  

^a DRESDEN UNIVERSITY OF TECHNOLOGY   (Germany)

^b FRAUNHOFER INSTITUTE FOR MATERIAL AND BEAM TECHNOLOGY IWS   (Germany)

Author keywords

Finite element method; Inductive preheating and postweld heating; Laser cladding; Phase transformation; Process simulation; Residual stress; Stellite coating

Indexed keywords

INDUCTIVE PREHEATING; POSTWELD HEATING; PROCESS SIMULATION; STELLITE COATING; THERMAL STRAIN;

COATING TECHNIQUES; COMPUTER SIMULATION; CRACKS; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; PHASE TRANSITIONS; PREHEATING; RESIDUAL STRESSES; STRAIN; STRAIN HARDENING;

LASER CLADDING;

EID: 34548281069     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-007-9026-7     Document Type: Review

References (57)

1. V.M. Weerasinghe and W.M. Steen, Computer Simulation Model for Laser Cladding, ASME H.T.D., 1983, 29, p 15-23
2. L. Li, W.M. Steen, and R.B. Hibberd, Computer Aided Laser Cladding, Proc. ECLAT'90, H.W. Bergmann and R. Kupfer, Ed., Sept 1990 (Erlangen, Germany), Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V. (AWT), 1990, Vol 1, p 355-369
3. C.F. Marsden, A. Frenk, J.-D. Wagnière, and R. Dekumbis, Effects of Injection Geometry on Laser Cladding, Proc. ECLAT'90, H.W. Bergmann and R. Kupfer, Sept 1990 (Erlangen, Germany), Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V. (AWT), 1990, Vol 1, p 535-542
4. C.F. Marsden, A.F.A. Houdley, and J.-D. Wagniére, Characterisation of the Laser Cladding Process, Proc. ECLAT'90, H.W. Bergmann and R. Kupfer, Ed., Sept 1990 (Erlangen, Germany), Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V. (AWT), 1990, 1, p 543-553
5. C.F. Marsden, A. Frenk, and J.-D. Wagnière, Power Absorption During the Laser Cladding Process, Laser Treatment of Materials-Proc. ECLAT'92, B.L. Mordike, Ed., Sept 1992 (Göttingen), DGM-Informationsgesellschaft Verlag, 1992, p 375-380
6. W.-B. Li, H. Engström, J. Powell, Z. Tan, and C. Magnusson, Modelling of the Laser Cladding Process-Preheating of the Blown Powder Material, Lasers Eng., 1995, 4, p 329-341
7. 2 Laser Cladding, Proc. Laser Materials Processing Conference ICALEO 2001, Oct 2001 (Jacksonville, FL), 2001, p 701
8. J. Lin, Temperature Analysis of the Powder Streams in Coaxial Laser Cladding, Optics Laser Technol., 1999, 31, p 565-570
9. J. Lin and B.-C. Hwang, Coaxial Laser Cladding on an Inclined Substrate, Optics Laser Technol., 1999, 31, p 571-578
10. J. Lin, A Simple Model of Powder Catchment in Coaxial Laser Cladding, Optics Laser Technol., 1999, 31(3), p 233-238
11. Lin J., Hwang B.-C. (2001) Clad Profiles in Edge Welding Using a Coaxial Powder Filler Nozzle. Optics Laser Technol. 33:267-275
12. C.-Y. Liu and J. Lin, Thermal Processes of a Powder Particle in Coaxial Laser Cladding, Optics Laser Technol., 2003, 35(2), p 81-86
13. T. Yoshida and K. Akashi, Particle Heating in a Radio-Frequency Plasma Torch, J. Appl. Phys., 1977, 48(6), p 2252-2260
14. A.F.A. Hoadley and M. Rappaz, A Thermal Model of Laser Cladding by Powder Injection, Metall. Trans. B, 1992, 23B(5), p 631-642
15. M. Picasso and A.F.A. Hoadley, Finite Element Simulation of Laser Surface Treatments Including Convection in the Melt Pool, Int. J. Num. Meth. Heat Fluid Flow, 1994, 4, p 61-83
16. N. Pirch, E.W. Kreutz, L. Möller, A. Gasser, and K. Wissenbach, Melt Dynamics in Surface Processing with Laser Irradiation, Proc. ECLAT'90, H.W. Bergmann and R. Kupfer, Ed., Sept 1990 (Erlangen, Germany), Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V. (AWT), 1990, p 65-80
17. B. Ollier, N. Pirch, E.W. Kreutz, and H. Schlüter, Cladding with Laser Radiation: Properties and Analysis, Laser Treatment of Materials-Proc. ECLAT'92, B.L. Mordike, Ed., DGM-Informationsgesellschaft Verlag, 1992, p 687-692
18. B. Ollier, N. Pirch, and E.W. Kreutz, Ein numerisches Modell zum einstufigen Laserstrahlbeschichten (A Numerical Model of Single-Stage Laser Cladding), Laser und Optoelektronik, 1995, 27(1), p 63-70 (in German)
19. H. Schmitter, "Simulation des einstufigen Laserbeschichtens mit FIDAP" (Simulation of the Single-Stage Laser Cladding), student research project, IFSW Stuttgart, 1994 (in German)
20. M. Picasso, C.F. Marsden, J.-D. Wagniere, A. Frenk, and M. Rappaz, A Simple but Realistic Model for Laser Cladding, Metall. Mater. Trans. B, 1994, 25B, p281-291
21. A.F.H. Kaplan and G. Groboth, Process Analysis of Laser Beam Cladding, J. Manuf. Sci. Eng., 2001, 123, p 609-614
22. D. Lepski, H. Eichler, V. Fux, S. Scharek, and E. Beyer, Calculating Temperature Field and Single Track Bead Shape in Laser Cladding with Marangoni Flow using Rosenthal's Solution, Lasers in Manufacturing'Proc. First Int. WLT-Conference on Lasers in Manufacturing, Wissenschaftliche Gesellschaft Lasertechnik e.V. (WLT), June 2001 (Munich), 2001, p 167-177
23. D. Lepski, H. Eichler, V. Fux, S. Scharek, and E. Beyer, Simulation of the Powder Injection Laser Beam Cladding Process, Proc. Internat. Conf. "THE" Coatings in Manufacturing Engineering and EUREKA Partnering Event, Nov 2002 (Thessaloniki, Greece), 2002, p 529-538
24. 4 PL 16), Jan 2003 (Igls, Austria)
25. D. Lepski, H. Eichler, S. Scharek, V. Fux, St. Nowotny, and E. Beyer, Simulation of Laser Beam Cladding by Powder Injection, Int. Conf. Laser 2003-World of Photonics, June 2003 (Munich), 2003
26. N. Pirch, S. Mokadem, S. Keutgen, K. Wissenbach, and E.W. Kreutz, 3D-Model for Laser Cladding by Powder Injection, Laser Assisted Net Shape Engineering 4, Proc. LANE 2004, M. Geiger and A. Otto, Ed., Sept 2004 (Erlangen, Germany), 2004, p 851-858
27. E. Toyserkani, A. Khajepour, and S. Corbin, 3-D Finite Element Modeling of Laser Cladding by Powder Injection: Effects of Laser Pulse Shaping on the Process, Opt. Lasers Eng., 2004, 41, p 849-867
28. J. Ahlström, B. Karlsson, and S. Niederhauser, Modeling of Laser Cladding of Medium Carbon Steel-a First Approach, J. Phys. IV France, 2004, 120, p 405-412
29. L. Han, F.W. Liou, and K.M. Phatak, Modeling of Laser Cladding with Powder Injection, Metall. Mater. Trans. B, 2004, 35B, p 1139-1150
30. L. Han, K.M. Phatak, and F.W. Liou, Modeling of Laser Deposition and Repair Process, J. Laser Appl., 2005, 17(2), p 89-99
31. J. Choi, L. Han, and Y. Hua, Modeling and Experiments of Laser Cladding with Droplet Injection, Trans. ASME, 2005, 127, p 978-986
32. R.K. Chin, J.L. Beuth, and C.H. Amon, Thermomechanical Modelling of Successive Material Deposition in Layered Manufacturing, Proc. Solid Freeform Fabrication Symposium, 1996 (Austin, TX), 1996, p 507-514
33. R.K. Chin, "Thermomechanical Modelling of Residual Stresses in Layered Manufacturing with Metals", Ph.D. Thesis, Carnegie Mellon University, 1998
34. N.W. Klingbeil, "Residual Stress Induced Warping and Interlayer Debonding in Layered Manufacturing", Ph.D. Thesis, Carnegie Mellon University, 1998
35. N.W. Klingbeil, J.L. Beuth, R.K. Chin, and C.H. Amon, Measurement and Modelling of Residual Stress-Induced Warpage in Direct Metal Deposition Processes, Proc. Solid Freeform Fabrication Symposium, 1998 (Austin, TX), 1998, p 367-374
36. A.M. de Deus and J. Mazumder, Two-Dimensional Thermo-Mechanical Finite Element Model for Laser Cladding, Proc. ICALEO, 1996 (Detroit, MI), 1996, p 174-183
37. A.M. de Deus, "A Thermal and Mechanical Model of Laser Cladding", PH.D. Thesis, University of Illinois, 2004
38. A.H. Nickel, "Analysis of Thermal Stresses in Shape Deposition Manufacturing of Metal Parts", Ph.D. Thesis, Stanford University, 1999
39. A.H. Nickel, D.M. Barnett, and F.B. Prinz, Thermal Stresses and Deposition Patterns in Layered Manufacturing, Mater. Sci. Eng., 2001, A317, p 59-64
40. F.-J. Kahlen and A. Kar, Residual Stresses in Laser-Deposited Metal Parts, J. Laser Appl., 2001, 13(12), p 60-69
41. K. Dai and L. Shaw, Thermal and Stress Modeling of Multi-Material Laser Processing, Acta Mater. 2001, 49, p 4171-4181
42. S. Ghosh and J. Choi, Three-Dimensional Transient Residual Stress Finite Element Analysis for Laser Aided Direct Metal Deposition Process, Proc. ICALEO 2003, 2003 (Orlando, FL), CD-Rom No. 908
43. S. Ghosh and J. Choi, Three-Dimensional Transient Finite Element Analysis for Residual Stresses in the Laser Aided Direct Metal/Material Deposition Process, J. Laser Appl., 2005, 17(3), p 144-158
44. R. Jendrzejewski, G. Sliwinski, M. Krawczuk, and W. Ostachowicz, Temperature and Stress Fields Induced During Laser Cladding, Comput. Struct., 2004, 82, p 653-658
45. R. Jendrzejewski, I. Kreja, and G. Sliwinski, Temperature Distribution in Laser-Clad Multi-Layers, Mater. Sci. Eng., 2004, A379, p 313-320
46. R. Jendrzejewski, G. Sliwinski, M. Krawczuk, and W. Ostachowicz, Laser Cladding of Protective Coatings of Limited Cracking Susceptibility, XV. International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, J. Kodymová, Ed., Aug-Sept 2004 (Prague, Czech Republic), 2004, p 925-928
47. A. Plati, J.C. Tan, I.O. Golosnoy, R. Persoons, K. van Acker, and T.W. Clyne, Residual Stress Generation During Laser Cladding of Steel with a Particulate Metal Matrix Composite, Adv. Eng. Mats., Jan 2006, 8 (7), p 619-624
48. Y. Zhang, Z. Xianghua, and Y. Xiangkai, Elimination of Laser Cladding Cracks: Thermal Control and Stress Analysis, Proc. ICALEO 2001, 2001 (Orlando, FL), 2001, p 705
49. G.W. Greenwood and R.H. Johnson, The Deformation of Metals Under Small Stresses During Phase Transformations, Proc. R. Soc. London. Series A, Mathematical and Physical Sciences, Jan 1965, 283 (1394), p 403-422
50. J.-B. Leblond, G. Mottet, and J.C. Devaux, A Theoretical and Numerical Approach to the Plastic Behaviour of Steels During Phase Transformations, I: Derivation of General Relations, J. Mech. Phys. Solids, 1986, 34 (4), p 395-409
51. J.-B. Leblond, G. Mottet, and J.C. Devaux, A Theoretical and Numerical Approach to the Plastic Behaviour of Steels During Phase Transformations, II: Study of Classical Plasticity for Ideal Plastic Phases, J. Mech. Phys. Solids, 1986, 34 (4), p411-432
52. J.-B. Leblond, J. Devaux, and J.C. Devaux, Mathematical Modelling of Transformation Plasticity in Steels, I: Case of Ideal Plastic Phases, Int. J. Plast., 1989, 5, p551-572
53. J.-B. Leblond, J. Devaux, and J.C. Devaux, Mathematical Modelling of Transformation Plasticity in Steels, II: Coupling with Strain Hardening Phenomena, Int. J. Plast., 1989, 5, p 573-591
54. B. Brenner, V. Fux, A. Wetzig, and St. Nowotny, Induktiv unterstütztes Laserauftragschweißn-eine Hybridtechnologie überwindet Anwendungsgrenzen (Induction Assisted Laser Cladding-a Hybrid Technology Expands Limits of Application), Proc. Sixth European Conference on Laser Treatment of Materials ECLAT'96, Sept 16-18, 1996 (Stuttgart(D)), 1996, 1, p 469-476 (in German)
55. B. Brenner, V. Fux, and A. Wetzig, Induktiv unterstütztes Laserauftragschweißen (Induction Assisted Laser Cladding), Härt.-Tech. Mitt., 1997, 52 (4), p 221-225 (in German)
56. B. Brenner and V. Fux, Induktiv unterstütztes Laserauftragschweißen-ein neues Verfahren zur effektiven Erzeugung hochverschleißbeständiger Randschichten (Induction Assisted Laser Cladding-A New Technology for the Efficient Generation of Highly Wear Protective Coatings), Stahl, 1999, p 48-50 (in German)
57. V. Fux and B. Brenner, Leistungsfähige Beschichtungsprozesse durch induktiv unterstütztes Laserauftragschweißen (High Performance Coating Technologies by Induction Assisted Laser Cladding), Freiberger Forschungshefte, 1999, B297, p 121-130 (in German)