A new approach for optimizing the mechanical behavior of porous microstructures for porous materials by design

Modelling and Simulation in Materials Science and Engineering

Volumn 15, Issue 6, 2007, Pages 653-674

  Bruck, Hugh A ^a,b   Gilat, Rivka ^c   Aboudi, Jacob ^b   Gershon, Alan L ^b  

^a TEL AVIV UNIVERSITY   (Israel)

^b UNIVERSITY OF MARYLAND   (United States)

^c Academic College JAS   (Israel)

Author keywords

[No Author keywords available]

Indexed keywords

MATHEMATICAL MODELS; MICROMECHANICS; NEWTON-RAPHSON METHOD; OPTIMIZATION; PARAMETERIZATION; PHASE STRUCTURE;

MICROMECHANICAL BEHAVIOR; MICROSTRUCTURAL CHARACTERISTICS; NEWTON-RAPHSON OPTIMIZATION; POROUS MICROSTRUCTURES;

POROUS MATERIALS;

EID: 34548236285     PISSN: 09650393     EISSN: 1361651X     Source Type: Journal    
DOI: 10.1088/0965-0393/15/6/005     Document Type: Article

References (42)

1. Aboudi J 1986 Overall finite deformation of elastic and elastoplastic composites Mech. Mater. 5 73-86
2. Aboudi J 1991 Mechanics of Composite Materials (Amsterdam: Elsevier)
3. Aboudi J 2002 Micromechanical analysis of the fully coupled finite thermoelastic response of rubber-like matrix composites Int. J. Solids Struct. 39 2587-612
4. Aboudi J 2004 The generalized method of cells and high-fidelity generalized method of cells micromechanical models-a review Mech. Adv. Mater. Struct. 11 329-66
5. Aboudi J and Gilat R 2005 Micromechanical analysis of lattice blocks Int. J. Solids Struct. 42 4372-92
6. Aboudi J and Pindera M-J 2004 High-fidelity micromechanical modeling of continuously reinforced elastic multiphase materials undergoing finite deformation Math. Mech. Solids 9 599-628
7. Bendsøe M P and Kikuchi N 1988 Generating optimal topologies in structural design using a homogenization method Comput. Methods Appl. Mech. Eng. 71 197-224
8. Bendsoe M P and Sigmund O 1999 Material interpolation schemes in topology optimization Arch. Appl. Mech. 69 635-54
9. Bruck H A 2007 Implantable biomedical devices and biologically inspired materials & systems Handbook on Experimental Mechanics (Norwell, MA: Springer)
10. Bruck H A, McNeill S R, Sutton M A and Peters W H III 1989 Digital image correlation using Newton-Raphson method of partial differential correction Exp. Mech. 29 261-7
11. Cule D and Torquato S 1999 Generating random media from limited microstructural information via stochastic optimization J. Appl. Phys. 86 3428-37
12. Fujii D, Chen B C and Kikuchi N 2001 Composite material design of two-dimensional structures using the homogenization design method Int. J. Numer. Methods Eng. 50 2031-51
13. Guedes J M and Kikuchi N 1990 Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite element methods Comput. Methods Appl. Mech. Eng. 83 143-98
14. Guedes J M, Rodrigues H C and Bendsoe M P 2003 A material optimization model to approximate energy bounds for cellular materials under multiload conditions Struct. Multidiscip. Optim. 25 446-52
15. Gyger L S Jr, Kulkarni P, Bruck H A, Gupta S K and Wilson O C Jr 2007 Replamineform inspired bone structures (RIBS) using multi-piece molds and advanced ceramic gelcasting technology Mater. Sci. Eng. C: Biomimetic Supremol. Syst. 27 646-53
16. Horgan C O 1995 On axisymmetric solutions for compressible nonlinearly elastic solids Z. Ang. Math. Phys. 46 S107-25
17. Lakes R S 1987 Foam structures with a negative Poisson's ratio Science 235 1038-40
18. Lakes R S 1993 Materials with structural hierarchy Nature 361 511-5
19. Lawrence C T and Tits A L 2001 A computationally efficient feasible sequential quadratic programming algorithm SIAM J. Optim. 11 1092-118
20. Lin C Y, Kikuchi N and Hollister S J 2004 A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity J. Biomech. 37 623-36
21. Ma Z D, Kikuchi N, Pierre C and Raju B 2006 Multidomain topology optimization for structural and material designs J. Appl. Mech.-Trans. ASME 73 565-73
22. Neves M M, Rodrigues H and Guedes J M 2000 Optimal design of periodic linear elastic microstructures Comput. & Struct. 76 421-9
23. Neves M M, Sigmund O and Bendsoe M P 2002 Topology optimization of periodic microstructures with a penalization of highly localized buckling modes Int. J. Numer. Methods Eng. 54 809-34
24. Peric D 1992 On consistent stress rates in solid mechanics: computational implications Int. J. Numer. Methods Eng. 33 799-817
25. Rodrigues H, Guedes J M and Bendsoe M P 2002 Hierearchical optimization of materials and structures Struct. Multidiscip. Optim. 24 1-10
26. Sheehan N and Torquato S 2001 Generating microstructures with specified correlation functions J. Appl. Phys. 89 53-60
27. Sigmund O 1995 Tailoring materials with prescribed elastic properties Mech. Mater. 20 351-68
28. Sigmund O 2000 Topology optimization: a tool for the tailoring of structures and materials Phil. Trans. R. Soc. Lond. A 358 211-27
29. Sigmund O and Jensen J S 2003 Systematic design of phononic band-gap materials and structures by topology optimization Phil. Trans. R. Soc. Lond. Ser. A-Math. Phys. Eng. Sci. 361 1001-19
30. Sigmund O and Torquato S 1997 Design of materials with extreme thermal expansion using a three-phase topology optimization method J. Mech. Phys. Solids 45 1037-67
31. Sigmund O and Torquato S 1999 Design of smart composite materials using topology optimization Smart Mater. Struct. 8 365-79
32. Silva E C N and Kikuchi N 1999 Design of piezocomposite materials and piezoelectric transducers using topology optimization-III Arch. Comput. Methods Eng. 6 305-29
33. Simo J and Pister K 1984 Remarks on rate constitutive equations for finite deformation problems: computational implications Comput. Methods. Appl. Mech. Eng. 46 201-15
34. Storn R and Price K 1997 Differential evolution-a simple and efficient heuristic for global optimization over continuous spaces J. Global Opt. 11 341-59
35. Surendranath H, Bruck H A and Gowrisankaran S 2003 Enhancing the optimizations of material distributions in composite structures using genetic algorithms Int. J. Solids Struct. 40 2999-3020
36. Takano N, Zako M, Nakagawa M and Takeda N 1998 Design of microstructures for the emergence of macroscopic function by homogenization method and genetic algorithms Mater. Sci. Res. Int. 4 153-8
37. Torquato S 2000 Modeling of physical properties of composite materials Int. J. Solids Struct. 37 411-22
38. Torquato S, Hyun S and Donev A 2003 Optimal design of manufacturable three-dimensional composites with multifunctional characteristics J. Appl. Phys. 94 5748-55
39. Torquato S, Donev A, Evans A G and Brinker C J 2005 Manufacturable extremal low-dielectric, high-stiffness porous materials J. Appl. Phys. 97 124103
40. Tseng K K 2004 Modeling and simulation of porous elastoviscoplastic materials J. Eng. Mech. 130 547-50
41. Wegge L 1966 On a discrete version of the Newton-Raphson method SIAM J. Numer. Anal. 3 134-42
42. Yu J L, Li J R and Hu S S 2006 Strain-rate effect and micro-structural optimization of cellular metals Mech. Mater. 38 160-70