Microstructural and tribological comparison of HVOF-sprayed and post-treated M-Mo-Cr-Si (M = Co, Ni) alloy coatings

Wear

Volumn 263, Issue 7-12 SPEC. ISS., 2007, Pages 1397-1416

  Bolelli, Giovanni ^a   Cannillo, Valeria ^a   Lusvarghi, Luca ^a   Montorsi, Monia ^a   Mantini, Fabio Pighetti ^a   Barletta, Massimiliano ^b  

^a UNIVERSITY OF MODENA AND REGGIO EMILIA   (Italy)

^b UNIVERSITY OF ROME TOR VERGATA   (Italy)

Author keywords

Co alloy; HVOF spraying; Ni alloy; Pin on disk test; Post treatment; Sliding wear

Indexed keywords

AMORPHOUS MATERIALS; COATINGS; ELASTIC MODULI; HEAT TREATMENT; MICROMECHANICS; MICROSTRUCTURE; TOUGHNESS; WEAR OF MATERIALS;

HVOF SPRAYING; POST TREATMENT; SLIDING WEAR; VICKERS MICROHARDNESS;

TRIBOLOGY;

AMORPHOUS MATERIALS; COATINGS; ELASTIC MODULI; HEAT TREATMENT; MICROMECHANICS; MICROSTRUCTURE; TOUGHNESS; TRIBOLOGY; WEAR OF MATERIALS;

EID: 34548022372     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2006.12.002     Document Type: Article

References (44)

1. Bernecki T. Surface science. In: Davis J.R. (Ed). Handbook of Thermal Spray Technology (2004), ASM International, Materials Park, OH 14-35
2. Herman H., Sampath S., and McCune R. Thermal spray: current status and future trends. Mater. Res. Soc. Bull. 25 7 (2000) 17-25
3. Sobolev V.V., Guilemany J.M., and Nutting J. High velocity oxy-fuel spraying, Maney for the Institute of Materials, Minerals and Mining. Leeds (2004) 65
4. Liu C.T., Zhu J.H., Brady M.P., McKamey C.G., and Pike L.M. Physical metallurgy and mechanical properties of transition-metal Laves phase alloys. Intermetallics 8 (2000) 1119-1129
5. Schmidt R.D., and Ferriss D.P. New materials resistant to wear and corrosion to 1000 °C. Wear 32 (1975) 279-289
6. Liu R., Xu W., Yao M.X., Patnaik P.C., and Wu X.J. A newly developed Tribaloy alloy with increased ductility. Scripta Materialia 53 (2005) 1351-1355
7. Navas C., Cadenas M., Cuetos J.M., and de Damborenea J. Microstructure and sliding wear behaviour of Tribaloy T-800 coatings deposited by laser cladding. Wear 260 (2006) 838-846
8. Przybylowicz J., and Kusinski J. Laser cladding and erosive wear of Co-Mo-Cr-Si coatings. Surface Coat. Technol. 125 (2000) 13-18
9. Foroulis Z.A. Guidelines for the selection of hardfacing alloys for sliding wear resistant applications. Wear 96 (1984) 203-218
10. Wolfla T.A., and Tucker R.C. High temperature wear resistant coatings. Thin Solid Films 53 (1978) 353-364
11. Price M.O., Wolfla T.A., and Tucker R.C. Some comparative properties of Laves- and carbide-strengthened coatings deposited by plasma or detonation gun. Thin Solid Films 45 (1977) 309-319
12. Sahraoui T., Fenineche N.-E., Montavon G., and Coddet C. Alternative to chromium: characteristics and wear behavior of HVOF coatings for gas turbine shafts repair (heavy-duty). J. Mater. Processing Technol. 152 (2004) 43-55
13. Bolelli G., Cannillo V., Lusvarghi L., and Riccò S. Mechanical and tribological properties of electrolytic hard chrome and HVOF-sprayed coatings. Surface Coat. Technol. 200 (2006) 2995-3009
14. Crawmer D.E. Thermal spray processes. In: Davis J.R. (Ed). Handbook of Thermal Spray Technology (2004), ASM International, Materials Park, OH 54-76
15. Sahraoui T., Feraoun H.I., Fenineche N., Montavon G., Aourag H., and Coddet C. HVOF-sprayed Tribaloy-400: microstructure and first principle calculations. Mater. Lett. 58 (2004) 2433-2436
16. Xiao-Xi G., and Zhang H. HVOF-sprayed Tribaloy (T-800): microstructure and particle-erosion behaviour. In: Berndt C.C. (Ed). Thermal Spray: International Advances in Coatings Technology (1992), ASM International, Materials Park, OH, USA 729-734
17. U.S. Hard Chrome Alternatives Team (HCAT), Joint Group on Pollution Prevention (JG-PP) and Canadian Hard Chrome Alternatives Team (C-HCAT), "Validation of WC-Co, WC-Co-Cr HVOF or Tribaloy 800 thermal spray coatings as a replacement for hard chrome plating on C-2/E-2/P-3 and C-130 propeller hubs and low pitch stop lever sleeve", Joint Test Protocol, 17 November 1999, available upon request.
18. Bolelli G., and Lusvarghi L. Heat treatment effects on the tribological performance of HVOF-sprayed Co-Mo-Cr-Si coatings. J. Thermal Spray Technol. 15 (2006) 802-810
19. Johnson R.N., and Farwick D.G. Friction, wear and corrosion of Laves-hardened nickel alloy hardsurfacing in sodium. Thin Solid Films 53 (1978) 365-373
20. Deloro-Stellite web site, http://www.stellite.com.
21. Oliver W.C., and Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7 (1992) 1564-1583
22. Evans A.F., and Wilshaw T.R. Quasi-static solid particle damage in brittle solids-I. Observations analysis and implications. Acta Metallurgica 24 (1976) 939-956
23. Lima M.M., Godoy C., Modenesi P.J., Avelar-Batista J.C., Davison A., and Matthews A. Coating fracture toughness determined by Vickers indentation: an important parameter in cavitation erosion resistance of WC-Co thermally sprayed coatings. Surface Coat. Technol. 177-178 (2004) 489-496
24. Warren B.E. X-ray Diffraction (1990), Dover Publications Inc, New York, USA pp. 251-254
25. Dragoe N. PowderV2: a suite of applications for powder X-ray diffraction calculations programs. J. Appl. Crystallogr. 34 (2001) 535
26. Crawmer D.E. Coating structures, properties and materials. In: Davis J.R. (Ed). Handbook of Thermal Spray Technology (2004), ASM International, Materials Park, OH 47-53
27. Wang W.H., Dong C., and Shek C.H. Bulk metallic glasses. Mater. Sci. Eng. R44 (2004) 45-89
28. Dong Y.H., and Scardi P. MarqX: a new program for whole-powder-pattern fitting. J. Appl. Crystallogr. 33 (2000) 184-189
29. Klarstrom D., and Srivastava K. Nickel alloys resist high-temperature corrosion. Adv. Mater. Processes 164 3 (2006) 31-34
30. Chen W.R., Wu X., Marple B.R., and Patnaik P.C. Oxidation and crack nucleation/growth in an air-plasma-sprayed thermal barrier coating with NiCrAlY bond coat. Surface Coat. Technol. 197 (2005) 109-115
31. Bhushan B. Principles and Applications of Tribology (1999), J. Wiley & Sons, New York, USA pp. 479-585
32. G. Straffelini, Attrito e usura: metodologie di progettazione e controllo, Tecniche Nuove, Milano, Italy, 2005, p. 174 (in Italian).
33. Stachowiak G.W., and Batchelor A.W. Engineering Tribology. Second ed. (2001), Butterworth-Heinemann, Boston, USA pp. 533-552
34. Bhushan B. Principles and Applications of Tribology (1999), J. Wiley & Sons, New York, USA pp. 431-478
35. Ashby M.F., Abulawi J., and Kong H.S. Temperature maps for frictional heating in dry sliding. Tribol. Trans. 34 4 (1991) 577-587
36. Stachowiak G.W., and Batchelor A.W. Engineering Tribology. Second ed. (2001), Butterworth-Heinemann, Boston, USA pp. 553-570
37. Bhushan B. Principles and Applications of Tribology (1999), J. Wiley & Sons, New York, USA p. 304
38. Tabor D. Hardness of Metals (1951), Clarendon Press, Oxford, UK
39. Bhushan B. Principles and Applications of Tribology (1999), J. Wiley & Sons, New York, USA pp. 198-293
40. Holmberg K., Laukkanen A., Ronkainen H., Wallin K., Varjus S., and Koskinen J. Tribological contact analysis of a rigid ball sliding on a hard coated surface. Part I: Modelling stresses and strains. Surface Coat. Technol. 200 (2006) 3793-3809
41. Stachowiak G.W., and Batchelor A.W. Engineering Tribology. Second ed. (2001), Butterworth-Heinemann, Boston, USA pp. 483-509
42. Ponton C.B., and Rawlings R.D. Vickers indentation fracture toughness test. Part 1: Review of literature and formulation of standardised indentation toughness equations. Mater. Sci. Technol. 5 (1989) 865-872
43. 2 coatings. Mater. Sci. Eng. A 346 (2003) 237-245
44. Bolelli G., Cannillo V., Lusvarghi L., and Manfredini T. Wear behaviour of thermally sprayed ceramic oxide coatings. Wear 261 (2006) 1298-1315