Potential of thermal sprayed TinO2n-1-coatings for substituting molybdenum-based ring coatings

Industrial Lubrication and Tribology

Volumn 59, Issue 5, 2007, Pages 217-229

  Landa, J ^a   Illarramendi, I ^a   Kelling, N ^b   Woydt, M ^b   Skopp, A ^b   Hartelt, M ^b  

^a TARABUSI ^*  (Spain)

^b BAM FEDERAL INSTITUTE FOR MATERIALS RESEARCH AND TESTING   (Germany)

Author keywords

Coatings; Friction; Lubrication; Simulation; Wear

Indexed keywords

COATINGS; LUBRICANTS; MOLYBDENUM; STOICHIOMETRY; THERMAL SPRAYING; TRIBOLOGY; VISCOSITY;

BIONOTOX; CANDIDATE METALLURGIES; REACTIVE PISTON; RING COATINGS;

TITANIUM OXIDES;

EID: 34547838625     PISSN: 00368792     EISSN: None     Source Type: Journal    
DOI: 10.1108/00368790710776801     Document Type: Article

References (39)

1. Aderin, M.E., Johnston, G.J., Spikes, H.A., Balson, T.G. and Emery, M.G. (1993), "The film-forming properties of polyalkylene glycols", Journal of Synthetic Lubrication, Vol. 10 No. 1, pp. 23-45.
2. 1,90", Die Naturwissenschaften, Jahrgang 43, Heft 21, pp. 195-6.
3. ®), ASTM, West Conshohocken, PA.
4. ® Test Machine, ASTM, West Conshohocken, PA.
5. Barbezat, G. and Sulzer Metco, A.G. (2004), "Wohlen/Switzerland, Personal communication - Sulzer, 14.05.2004 and high performance coating produced by thermal spraying on engine blocks of new generation", Conference Proceedings International Thermal Spray Conference and Exhibition ITSC 2004, 10-12 May, Osaka, Japan, Verlag für Schweißen und Verwandte Verfahren, DVS-Verlag, Düsseldorf, CD.
6. Berger, L-M. (2004), "Titanium oxide - new opportunities for an established coating material", Conference Proceedings International Thermal Spray Conference and Exhibition ITSC 2004, 10-12 May 2004, Osaka, Japan, Verlag für Schweißen und Verwandte Verfahren, DVS-Verlag, Düsseldorf, p. 12.
7. Berger, L-M., Vuoristo, P., Mäntylä, T. and Gruner, W. (1998), "A study of oxidation behaviour of WC-Co, Cr3C2-NiCr and TiC-Ni-based materials in thermal spray processes", in Coddet, C. (Ed.), Thermal Spray: Meeting the Challenges of the 21st Century: Proceedings of 15th Int. Thermal Spray Conference, ASM International, Materials Park, OH, pp. 75-82.
8. Buchmann, M. (2002), "Herstellung und Optimierung von thermisch gespritzten Schichtsystemen auf Leichtmetall-Zylinderlaufflächen", PhD thesis, Universität Stuttgart, Stuttgart.
9. Buchmann, M., Gadow, R., Killinger, A. and Lopez, D. (2002), "Thermisch gespritzte, tribologisch wirksame Schichtsysteme auf Leichtmetall-Zylinderlaufflächen", Galvanotechnik, Vol. 93 No. 10, pp. 2660-9 and Vol. 94 No. 11, pp. 2942-9.
10. Cook, D., Kowalsky, K. and Dicks, R. (2003), "Thermal spray of cylinder bores with the Ford PTWA process", VDI-Berichte Nr. 1764, pp. 151-8.
11. Directive 1999/45/EC of the European Parliament and of the Council (1999), "Directive related to the classification, packaging and labelling of dangerous preparations. Application to greases and ingredients", Official Journal of the European Communities, L 200/1, 30 July.
12. Flor, S. (2003a), "Verhalten plasmagespritzter Zylinderlaufflä chen im Diesel-Motorbetrieb", Proceedings of 2. VDI-Tagung: Zylinderlaufbahn, Hochleistungskolben, Pleuel - Innovative Systeme im Vergleich - 16/17 September 2003, pp. 10-15.
13. Flor, S. (2003b), "Beitrag zum Verschleißverhalten von plasmagespritzten Zylinderlaufflächen im Diesel-Motorbetrieb", PhD thesis, University Dortmund, Cuvillier Verlag Göttingen, 303 pp.
14. 2n-1)", Tribological Letters, Vol. 8 Nos 2/3, pp. 65-78.
15. Herbst-Dederichs, C. (2003), "Thermal spray solutions for diesel engine piston rings", in Moreau, C. and Marple, B. (Eds), Thermal Spray 2003: Advancing the Science & Applying the Technology, ASM International, Materials Park, OH.
16. Heuberger, A., Lagemann, V., Chu Suy, F., Gasthuber, H., Füßer, H-J. and Kratzsch, A. (2003), "Mikrohydrodynamik and Festkörperkontakt - Betrachtungen am Beispiel des Tribosystems Kolben-Kolbenringe-Zylinderlaufbahn", VDI-Berichte Nr. 1764, pp. 25-43.
17. Hochwertig legierter Grauguß (2002), "Hochwertig legierter Grauguß (High value alloyed grey cast iron)", Supply Specification DBL 4401 of Mercedes-Benz, December, 4 pp.
18. 2-x", J. Phys. Chem Solids, Vol. 46 No. 12, pp. 1397-411.
19. 2-x Einkristalle, Polykristalle und polykristalline dünne Schichten - Leitfähigkeit und Defektchemie von Volumen und Oberfläche", PhD thesis, Eberhard-Karls- Universität Tübingen, 123 p.
20. Kolbenringhandbuch (2003), Kolbenringhandbuch (Piston ring Handbook), April, Federal Mogul Burscheid GmbH, Burscheid.
21. Magnéli, A., Anderson, S., Westmann, S., Kihlborg, L., Holmberg, B., Brink, S.A. and Nordmark, C. (1959), "Studies on the crystal chemistry of titanium, vanadium and molybdenum oxides at elevated temperatures", Final Technical Report 1, DA-91-591-EUC-935, Stockholm University, Stockholm.
22. Matlock, P.L., Brown, W.L. and Clinton, N.A. (1999), "Polyalkylene glycols", in Rudnick, L.R. and Shubkin, R.L. (Eds), Synthetic Lubricants and High-Performance Functional Fluids, 2nd ed., Marcel Dekker, Inc., New York, NY, pp. 159-93.
23. Naumann, T., Berger, L-M., Ingwerth, M. and Vuoristo, P. (2003), "Titanium suboxide coatings prepared by VPS spraying", in Moreau, C. and Marple, B. (Eds), Thermal Spray 2003: Advancing the Science & Applying the Technology, ASM International, Materials Park, OH, pp. 1441-5.
24. Oil Pollution Prevention and Response (2000), "Non-transportation- related facilities, Part III, final rule. 30.06.2000, 40 CFR Part 112", Federal Register, Vol. 65 No. 127, Rules and Regulations.
25. Ozdemir, T., Ueno, T., Tsunekawa, T. and Okumiya, M. (2004), "Cast iron coatings containing graphite structure by atmospheric plasma spraying", Conference Proceedings International Thermal Spray Conference & Exhibition ITSC 2004, 10-12 May, Osaka, Japan, Verlag für Schweißen und Verwandte Verfahren, DVS-Verlag, Düsseldorf.
26. Renault, S.A. (n.d.a), Fluides fonctionnels non toxiques et biodégradables à base d'esters à chanes grasses de néopolyol pour véhicules automobiles FR 2 792 325.
27. Renault, S.A. (n.d.b), Fluides fonctionnels non toxiques et biodégradables à base de copolymères d'oxyde d'éthylène et d'oxyde de propylène pour véhicules automobiles FR 2 792 326.
28. Seyffert, C. and Luther, R. (2003), "Der Schmierstoff als Funktionsträger - Aufgaben und Zielkonflikte. 10. Werkstoffwissenschaftliches Kolloquium, Innovative Werkstofftechnologie (2002)", Aachen. Werkstoffwissenschaftliche Schriftenreihe, Vol. 61, pp. 25-30.
29. Shanley, A. and Butcher, C. (1999), "Lubricants aim for higher performance", Chemical Engineering, Vol. 6, pp. 69-72.
30. Skopp, A. and Woydt, M. (1995), "Ceramic and ceramic composite materials with improved friction and wear properties", Trib. Trans., Vol. 38 No. 2, pp. 233-42.
31. 2n-1) als Beschichtungen für Zylinderlaufbahnen", PhD thesis, TU Berlin, 139 pp.
32. 2n-1)", Surface and Coatings Technology, Vol. 140, pp. 76-81.
33. 2n-1 powders by APS and VPS", Conference Proceedings International Thermal Spray Conference and Exhibition ITSC 2004, 10-12 May, Osaka, Japan, Verlag für Schweißen und Verwandte Verfahren, DVS-Verlag, Düsseldorf, CD, p. 7.
34. US Patent 6,194,359 B1 (2001), Operating fluid for lifetime lubricated internal combustion engines, Inventors: L. Beyer, H. Gasthuber, H. Müske, M. Woydt, published: 27 February.
35. Woydt, M. (2000), "Tribological characteristics of polycrystalline titaniumdioxides with planar defects", Tribology Letters, Vol. 8 Nos 2/3, Special issue, Lubricious Oxides, pp. 117-30.
36. Woydt, M. (2004), "Ti-O - Ein Stoffsystem mit erscheinungsreichen tribologischen Eigenschaften", Materialwissenschaft und Werkstofftechnik, Vol. 35 Nos 10/11.
37. Woydt, M. and Kelling, N. (2003), "Testing the tribological properties of lubricants and materials for the system 'piston ring/cylinder liner' outside of engines", Industrial Lubrication and Tribology, Vol. 55 No. 5, pp. 213-22.
38. Woydt, M., Kelling, N. and Buchmann, M. (2004), "Thermisch gespritzte, keramische Zylinderlaufbahnen unter Misch/Grenzreibung", Materialwissenschaft & Werkstofftechnik, Vol. 35 Nos 10/11, DGM-Tagung Bad Nauheim.
39. Woydt, M., Skopp, A., Dörfel, I. and Witke, K. (1999), "Wear engineering oxides/antiwear oxides", STLE Tribology Transactions, Vol. 42 No. 1, pp. 21-31.