An aeroelastic topology optimization approach for adaptive wing design

Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

Volumn 4, Issue , 2004, Pages 3182-3191

  Maute, K ^a   Reich, G W ^b  

^a University of Colorado at Boulder   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACTUATORS; AERODYNAMICS; DEFORMATION; FLIGHT DYNAMICS; OPTIMIZATION; STRUCTURAL DESIGN;

AEROELASTIC TOPOLOGY OPTIMIZATION; AIRCRAFT STRUCTURES; MISSION ADAPTIVE WING (MAW); STRUCTURAL DEFORMATION;

WINGS;

EID: 16244386529     PISSN: 02734508     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2514/6.2004-1805     Document Type: Conference Paper

References (46)

1. Hall, J., "Executive Summary AFTI/F-111 Mission Adaptive Wing," Tech. Rep. WRDC-TR-89-2083, Wright Research Development Center, Wright-Patterson Air Force Base, 1998.
2. Chopra, I., "Review of State of Art of Smart Structures and Integrated Systems," AIAA Journal, Vol. 40, No. 11, 2002, pp. 2145 - 2187.
3. Anderson, E. H., Fahey, S., and Regelbrugge, M., "High-power smart material-hydraulic actuation," SPIE Smart Structures and Materials Conference: Industrial and Commercial Applications of Smart Structures Technologies, Vol. 5388, 2004.
4. Bridger, K., Lutian, J., Sewell, J., Kohlhafer, D., Cooke, A., and Small, G., "High-pressure magnetostrictive pump development: a comparison of prototype and modeled performance," SPIE Smart Structures and Materials Conference: Industrial and Commercial Applications of Smart Structures Technologies, Vol. 5388, 2004.
5. Reich, G., Bowman, J., and Sanders, B., "Large Area Aerodynamic Control for High-Altitude Long Endurance Sensor Platforms." Journal of Aircraft, in press, 2004.
6. Sanders, B., Eastep, F., and Forster, E., "Aerodynamic and Aeroelastic Characteristics of Wings with Conformal Control Surfaces for Morphing Aircraft," Journal of Aircraft, Vol. 40, No. 1, 2003, pp. 94-99.
7. Kudva, J., Sanders, B., Pinkerton-Florance, J., and Garcia, E., "The DARPA/AFRL/NASA Smart Wing Program - Final Overview," SPIE Smart Structures and Materials Conference: Industrial and Commercial Applications of Smart Structures Technologies, March, 2002, San Diego, CA, 2002.
8. Bowman, J., Sanders, B., and Weisshaar, T., "Evaluating the impact of morphing technologies on aircraft performance," AIAA 2002-1631, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 22-25, Denver, CO, 2002.
9. Lamar, J., "A Vortex-Lattice Method for the Mean Camber Shapes of Trimmed Koncoplanar Planforms with Minimum Induced Drag," Tech. Rep. TN D-8090, NASA, 1976.
10. Jameson, A., Martinelli, L., and Pierce, N., "Optimum Aerodynamic Design using the Navier-Stokes Equations," Theoretical and Computational Fluid Dynamics, Vol. 10, 1998, pp. 213-237.
11. Maute, K., Nikbay, M., and Farhat, C., "Coupled Analytical Sensitivity Analysis and Optimization of Three-Dimensional Nonlinear Aeroelastic Systems," AIAA Journal, Vol. 39, No. 11, 2001, pp. 2051-2061.
12. Gumbert, C., Hou, G.-W., and Newman, P., "Simultaneous Aerodynamic Analysis and Design Optimization (SAADO) for a 3 D Flexible Wing," AIAA 2001-1107, 39th Aerospace Sciences Meeting & Exhibit, January 8-11, 2001, Reno, NV, 2001.
13. Martins, J. and Alonso, J., "High-fidelity aero-structural design optimization of a supersonic business jet," AIAA 2002-1483, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 22-25, 2002, Denver, CO, 2002.
14. Rozvany, G. I. N., Bendsøe, M. P., and Kirsch, U., "Layout optimization of structures," Appl. Mech. Rev., Vol. 48, 1995, pp. 41-119.
15. Bendsøe, M., Optimization of structural topology, shape, and material, Berlin: Springer, 1995.
16. Olhoff, N. and Eschenauer, H., "On Optimum Topology Design in Mechanics," ECCM'99, European Conference on Computational Mechanics, August 31 - September 3, Munich, Germany, 1999.
17. Maute, K., Nikbay, M., and Farhat, C., "Conceptual layout of aeroelastic wing structures by topology optimization," AIAA 2002-1480, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 22-25, 2002, Denver, CO, 2002.
18. Maute, K. and Allen, M., "Conceptual Design of Aeroelastic Structures by Topology Optimization," Struct. Multidisc. Optim., in press, 2004.
19. Ananthasuresh, G., Kota, S., and Kikuchi, N., "Strategies for systematic synthesis of compliance MEMS," Proceedings of the 1994 ASME winter Annual Meeting, November 1994, Chicago, IL, 1994, pp. 677-686.
20. Sigmund, O., "On the design of compliant Mechanisms," Mech Struct. & Mach., Vol. 25, 1997, pp. 493-524.
21. Nishiwaki, S., Frecker, M., Min, S., and Kikuchi, N., "Topology optimization of compliant mechanisms using homogenization method," International Journal for Numerical Methods in Engineering, Vol. 42, 1998, pp. 535-559.
22. Bruns, T. E. and Tortorelli, D. A., "Topology optimization of geometrically nonlinear structures and compliant mechanisms," Proceedings of the 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, St. Louis, USA, 1998, pp. 1874-1882.
23. Pedersen, C. B. W., Buhl, T., and Sigmund, O., "Topology optimization of large displacement compliant mechanism," International Journal for Numerical Methods in Engineering, Vol. 50, 2001, pp. 2683-2705.
24. Padula, S. and Kincaid, R., "Optimization Strategies for Sensor and Actuator Placement," Tech. rep., NASA TM 199 209126, National Aeronautics and Space Administration, Langley Research Center, Langley, VA, 1999.
25. Frecker, M., "Recent Advances in Optimization of Smart Structures and Actuators," submitted to Journal of Intelligent Material Systems and Structures, preprint: http://edog.mne.psu.edu/faculty.html, 2002.
26. Saggere, L. and Kota, S., "Static Shape Control of Smart Structures Using Compliant Mechanisms," AIAA Journal, Vol. 37, 1999, pp. 572-578.
27. Monner, H. P., "Realization of an Optimized Wing Camber by Using Formvariable Flap Structures," Aerospace Science and Technology, Vol. 5, No. 7, 2001.
28. Lu, K.-J. and Kota, S., "Design of Compliant Mechanisms for Morphing Structural Shapes," Journal of Intelligent Material Systems and Structures, Vol. 14, No. 6, 2003.
29. Bendsøe, M. P., "Optimal shape design as a material distribution problem," Structural Optimization, Vol. 1, 1989, pp. 193-202.
30. Rozvany, G. I. N., Zhou, M., and Birker, T., "Generalized shape optimization with homogenization," Structural Optimization, Vol. 4, 1992, pp. 250-252.
31. Papalambros, P. and Chirehdast, M., Topology design of structures, chap. Integrated structural optimization systems, Kluwer Academic Publishers, Dordrecht, 1993.
32. Maute, K. and Ramm, E., "Adaptive Topology Optimization," Structural Optimization, Vol. 10, 1995, pp. 100-112.
33. Haber, R. B., Jog, C. S., and Bendsoe, M. P., "A new approach to variable-topology shape design using a constraint on perimeter," Structural Optimization, Vol. 11, 1996, pp. 1-12.
34. Sigmund, O. and Petersson, J., "Numerical instabilities in topology optimization: A survey on procedures dealing with checkerboards, mesh-dependencies and local minima," Structural Optimization, Vol. 16, 1998, pp. 68-75.
35. Buhl, T., "Simultaneous topology optimization of structure and supports," Structural and Multidisciplinary Optimization, Vol. 23, No. 5, 2002, pp. 336-346.
36. Maute, K. and Frangopol, D., "Reliability-based Design of MEMS Mechanisms by Topology Optimization," Computers and Structures, Vol. 81, 2003, pp. 813-824.
37. Ma, Z.-D., Kikuchi, N., Cheng, H.-C., and Hagiwara, I., "Topological optimization technique for free vibration problems," ASME Journal for Applied Mechanics, Vol. 62, 1995, pp. 200-207.
38. Duysinx, P. and Bendsøe, M. P., "Topology optimization of continuum structures with stress constraints," Proceedings of the 2nd World Congress of Structural and Multidisciplinary Optimization, edited by W. Gutkowski and Z. Mróz, Institute of Fundamental Technological Research, Warsaw, Poland, 1997, pp. 527-532.
39. Sigmund, O., "Design of multiphysics actuators using topology optimization - Part I: One-material structures," Computer Methods in Applied Mechanics and Engineering, Vol. 190, No. 49-50, 2001, pp. 6577-6604.
40. Sigmund, O., "Design of multiphysics actuators using topology optimization - Part II: Two-material structures," Computer Methods in Applied Mechanics and Engineering, Vol. 190, No. 49-50, 2001, pp. 6605-6627.
41. Farhat, C., Lesoinne, M., and Maman, N., "Mixed explicit/implicit time integration of coupled aeroelastic problems: three-field formulation, geometric conservation and distributed solution," International Journal of Numerical Methods in Fluids, Vol. 21, 1995, pp. 807-835.
42. Nour-Omid, B. and Rankin, C. C., "Finite rotation analysis and consistent linearization using projectors," Computer Methods in Applied Mechanics and Engineering, Vol. 93, 1991, pp. 353-384.
43. Degand, C. and Farhat, C., "A three-dimensional torsional spring analogy method for unstructured dynamic meshes," Computers and Structures, Vol. 80, 2002, pp. 305-316.
44. Maute, K., Nikbay, M., and Farhat, C., "Sensitivity Analysis and Design Optimization of Three-Dimensional Nonlinear Aeroelastic Systems by the Adjoint Method," International Journal for Numerical Methods in Engineering, Vol. 56, No. 6, 2003, pp. 911-933.
45. Sobieszczanski-Sobieski, J., Agte, J. S., and Sandusky, R., "Bi-Level Integrated System Synthesis," AIAA 98-4916, 1998.
46. Sobieszczanski-Sobieski, J., Mark, S., Agte, J. S., and Sandusky, R., "Advancement of Bi-Level Integrated System Synthesis (BLISS)," AIAA 2000-0421, 38th AIAA Aerospace Sciences Meeting and Exhibit, January 10-13, 2000, Reno, Nevada, 2000.