Predictive modeling of flank wear in turning under flood cooling

Journal of Manufacturing Science and Engineering

Volumn 129, Issue 3, 2007, Pages 513-519

  Li, Kuan Ming ^a   Liang, Steven Y ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Coolant; Predictive models; Tool wear

Indexed keywords

COMPUTER SIMULATION; COOLANTS; FRICTION; HEAT LOSSES; MACHINING; SHEAR DEFORMATION; THERMOMECHANICAL TREATMENT;

CUTTING FORCE ANALYSIS; DYNAMIC STRAIN; FLANK WEAR; PREDICTIVE MODELING; PROCESS PARAMETERS;

WEAR OF MATERIALS;

EID: 34547463157     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2714589     Document Type: Article

References (25)

1. Klocke, F., and Eisenblaetter, G., 1997, "Dry Cutting," CIRP Ann., 46(2), pp. 519-526.
2. De Chiffre, L., and Belluco, W., 2002, "Investigations of Cutting Fluid Performance Using Different Machining Operations," Lubr. Eng., 58(10), pp. 22-29.
3. De Chiffre, L., 1978, "Testing the Overall Performance of Cutting Fluids," Lubr. Eng., 34(5), pp. 244-251.
4. Shaw, M. C., 1996, Metal Cutting Principles, Oxford University Press, New York.
5. Avila, R. F., and Abrao, A. M., 2001, "The Effect of Cutting Fluids on the Machining of Hardened AISI 4340 Steel," J. Mater. Process. Technol., 119(1-3), pp. 21-26.
6. Upton, D. P., 2000, "Optimization of Cutting Fluid Performance," Int. J. Prod. Res., 38(5), pp. 1219-23.
7. Merchant, M. E., 1950, "Fundamentals of Cutting Fluid Action," Lubr. Eng., 6(4), pp. 163-167.
8. De Chiffre, L., 1980, "Lubrication in Cutting - Critical Review and Experiments With Restricted Contact Tool," ASLE Trans., 24(3), pp. 340-344.
9. Smith, T., Naerheim, Y., and Lan, M. S., 1988, "Theoretical Analysis of Cutting Fluid Interaction in Machining," Tribol. Int., 21(5), pp. 239-247.
10. Childs, T. H. C., Maekawa, K., and Maulik, P., 1988, "Effects of Coolant on Temperature Distribution in Metal Machining," Mater. Sci. Technol., 4(11), pp. 1006-1019.
11. Kato, S., Marui, E., and Hashimoto, M., 1998, "Fundamental Study on Normal Load Dependency of Friction Characteristics in Boundary Lubrication," Tribol. Trans., 41(3), pp. 341-349.
12. Huang, Y., 2002, "Predictive Modeling of Tool Wear Rate With Application to Cbn Hard Turning," Ph.D. thesis, School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
13. Li, K.-M., and Liang, S. Y., 2005, "Predictive Models for Flank Wear in Near Dry Machining," Proceedings of 2005 ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, November 5-11, ASME, New York.
14. Moore, D. F., 1975, Principles and Applications of Tribology. 1st ed., Pergamon, Ps, New York.
15. Waldorf, D. J., 1996, "Shearing, Ploughing and Wear in Orthogonal Machining," Ph.D. Thesis, University of Illinois at Urbana-Champaign, Urbana-Champaign, IL.
16. Smithey, D. W., Kapoor, S. G., and DeVor, R. E., 2001, "A New Mechanistic Model for Predicting Worn Tool Cutting Forces," Mach. Sci. Technol., 5(1), pp. 23-42.
17. Li, X., 1995, "Effect of Coolant Flow Rate on Cooling in Machining," Proceedings of the NAMRC 23rd Conference, SME, Houghton, MI, pp. 109-114.
18. Li, K.-M., and Liang, S. Y., 2007, "Modeling of Cutting Temperature in Near Dry Machining," ASME Transactions, J. Manuf. Sci. Eng., in press.
19. Young, H. T., Mathew, P., and Oxley, P. L. B., 1987, "Allowing for Nose Radius Effects in Predicting the Chip Flow Direction and Cutting Forces in Bar Turning," Proc. Inst. Mech. Eng., Part C: Mech. Eng. Sci., 201(3), pp. 213-226.
20. Hastings, W. F., Mathew, P., and Oxley, P. L., 1980, "Machining Theory for Predicting Chip Geometry, Cutting Forces, etc., From Work Material Properties and Cutting Conditions," Proc. R. Soc. London, Ser. A, 371(1747), pp. 569-587.
21. Oxley, P. L. B., 1989, The Mechanics of Machining: An Analytical Approach to Assessing Machinability, E. Horwood, New York.
22. Arsecularatne, J. A. et al., 1996, "Prediction of Cutting Forces and Built-up Edge Formation Conditions in Machining With Oblique Nose Radius Tools," Proc. Inst. Mech. Eng., Part B, 210(B5), pp. 457-469.
23. Shackelford, J. F., Alexander, W., and Park, J. S., 1994, Crc Materials Science and Engineering Handbook. 2nd ed., CRC, Boca Raton, FL.
24. 1992, ASM Handbook, ASM International, Materials Park, OH.
25. Wu, C.-F., and Hamada, M., 2000, Experiments: Planning, Analysis, and Parameter Design Optimization, Wiley, New York.