Modelling of cake filtration: An overview

Separation Science and Technology

Volumn 42, Issue 8, 2007, Pages 1667-1700

  Olivier, J ^a   Vaxelaire, J ^a   Vorobiev, E ^b  

^a UNIVERSITÉ DE PAU ET DES PAYS DE L'ADOUR   (France)

^b UNIVERSITÉ DE TECHNOLOGIE DE COMPIÈGNE   (France)

Author keywords

Consolidation; Dewatering; Expression; Filtration

Indexed keywords

COMPUTER SIMULATION; CONSOLIDATION; DEWATERING; MATHEMATICAL MODELS;

CONTINUITY EQUATION; FUNDAMENTAL EQUATIONS; MOMENTUM BALANCE;

FILTRATION;

COMPUTER SIMULATION; CONSOLIDATION; DEWATERING; FILTRATION; MATHEMATICAL MODELS;

DESIGN; FILTRATION; PULP; SIMULATION;

EID: 34547359923     PISSN: 01496395     EISSN: 15205754     Source Type: Journal    
DOI: 10.1080/01496390701242186     Document Type: Article

References (159)

1. Ruth, B.F., Montillon, G.H., and Montonna, R.E. (1933) Studies in filtration II. Fundamental axiom of constant pressure filtration. Ind. Eng. Chem., 25 (2): 153.
2. Ruth, B.F. (1935) Studies in Filtration III. Derivation of general filtration equation. Ind. Eng. Chem., 27 (6): 708.
3. Almy, C. and Lewis, W.K. (1912) Factor determining capacity filter press. J. Ind. Eng. Chem., 4: 528.
4. Baker, F.P. (1921) A study of the fundamental laws of filtration using plant-scale equipment. The. J. Ind. Eng. Chem., 13 (7): 610.
5. Sperry, D.R. (1916) The principles of filtration. Metall. Chem. Eng., 15 (4): 198.
6. Weber, H.C. and Hershey, R.L. (1926) Some practical application of the Lewis filtration equation. Ind. Eng. Chem., 18 (4): 341.
7. Carman, P.C. (1938) Fundamental principles of industrial filtration. Trans. IChemE., 16: 168.
8. Rushton, A. et al. (1996) Solid-liquid Filtration and Separation Technology; VCH Publishers: New York.
9. Wakeman, R.J. and Tarleton, E.S. (1999) Filtration. Equipment Selection Modelling and Process Simulation; Elsevier Advanced Technolgy Publishers: Oxford.
10. Tien, C. (2002) Cake filtration research - a personal view. Powder Technol., 127 (1): 1.
11. Wakeman, R.J. (1981) Thickening and filtration: a review and evaluation of recent research. Trans. IChemE, 29: 147.
12. Shirato, M. et al. (1985) Theoretical and experimental studies in cake filtration. Memoirs of the Faculty of Engineering Nagoya University 37: 38.
13. Lee, D.J. and Wang, C.H. (2000) Theories of cake filtration and consolidation and implications to sludge dewatering. Water Res., 34 (1): 1.
14. Yükseler, H., Yetis, U., and Tosun, I. (2005) Current status of filtration theory. J. Residuals Sci. Tech., 2: 211.
15. Tiller, F.M. (1953) The role of porosity in filtration. Numerical methods for constant rate and constant pressure filtration based on Kozeny's law. Chem. Eng. Prog., 49 (9): 467.
16. Tiller, F.M. and Huang, C.J. (1961) Filtration equipment. Theory. Ind. Eng. Chem., 53 (7): 529.
17. Tiller, F.M. and Green, T.C. (1973) The role of porosity in filtration. IX: Skin effect with highly compressible materials. AIChE J., 19 (6): 1266.
18. Tiller, F.M. and Crump, J.R. (1977) Solid-Liquid separation: an overview. Chem. Eng. Prog., 73: 65.
19. Shirato, M., Sambuichi, M., Kato, H., and Aragaki, T. (1969) Internal flow mechanism in filter cakes. AIChE J., 15 (3): 405.
20. Stamatakis, K. and Tien, C. (1991) Cake formation and growth in cake filtration. Chem. Eng. Sci., 46 (8): 1917.
21. Wu, Y. (1994) An analysis of constant-pressure filtration. Chem. Eng. Sci., 49 (6): 831.
22. Lee, D.J., Ju, S.P., Kwon, J.H., and Tiller, F.M. (2000) Filtration of highly compactible filter cake: variable internal flow rate. AIChE J., 46 (1): 110.
23. Tiller, F.M., Chow, R., Weber, W., and Davies, O. (1981) Clogging phenomena in the filtration of liquefied coal. Chem. Eng. Prog., 77: 61.
24. Sorensen, P.B., Moldrup, P., and Hansen, J.Aa. (1996) Filtration and expression of compressible cakes. Chem. Eng. Sci., 51 (6): 967.
25. Sorensen, B.L. and Sorensen, P.B. (1997) Structure compression in cake filtration. J. Environ. Eng., 123 (4): 345.
26. Buscall, R. and White, L.R. (1987) The consolidation of concentrated suspensions. Part I. - The theory of sedimentation. J. Chem. Soc. Faraday Trans., 83: 873.
27. Landman, K.A., Sirakoff, C., and White, L.R. (1991) Dewatering of flocculated suspensions by pressure filtration. Phys. Fluids A., 3 (6): 1495.
28. Landman, K.A. and Russel, W.B, (1993) Filtration at large pressure for strongly flocculated suspensions. Phys. Fluids A., 5 (3): 550.
29. Landman, K.A. and White, L.R. (1994) Solid/liquid separation of flocculated suspensions. Adv. Colloid Interface Sci., 51: 175.
30. Landman, K.A., White, L.R., and Eberl, M. (1995) Pressure filtration of flocculated suspensions. AIChE J., 41 (7): 1687.
31. de Kretser, R.G., Boger, D.V., and Scales, P.J. (2002) Compressive rheology: an overview. Annual Rheology Reviews. ed. British Society of Rheology, : 125.
32. Smiles, D.E. (1970) A theory of constant pressure filtration. Chem. Eng. Sci., 25: 985.
33. Smiles, D.E. and Kirby, J.M. (1987) Aspects of one-dimensional filtration. Sep. Sci. Tech., 22: 1405.
34. Smiles, D.E. (2000) Use of material coordinates in porous media solute and water flow. Chem. Eng. J., 80 (1-3): 215.
35. Wakeman, R.J. (1978) A numerical integration of the differential equations describing the formation of and flow in compressible filter cakes. Trans. IChemE., 56: 258.
36. Tosun, I. (1986) Formulation of cake filtration. Chem. Eng. Sci., 41 (10): 2563.
37. Willis, M.S. and Tosun, I. (1980) A rigorous cake filtration theory. Chem. Eng. Sci., 35: 2427.
38. Willis, M.S., Collins, R.M., and Bridges, W.G. (1983) Complete analysis of non-parabolic filtration behaviour. Chem. Eng. Res. Des., 61: 96.
39. Chase, G.G. and Willis, M.S. (1992) Compressive cake filtration. Chem. Eng. Sci., 47 (6): 1373.
40. Tosun, I., Willis, M.S., Desai, F., and Chase, G.G. (1995) Analysis of drag and particulate stress in porous media flows. Chem. Eng. Sci., 50 (12): 1961.
41. Gray, W.G. (1975) A derivation of the equations for multi-phase transport. Chem. Eng. Sci., 30: 229.
42. Whitaker, S. (1977) Simultaneous heat, mass and momentum transfer in porous media: a theory of drying. Advances in Heat Transfer; Academic Press: New York, 119-203.
43. Stickland, A.D. (2005) Solid-liquid separation in the water and wastewater industries, PhD thesis. University of Melbourne.
44. Tiller, F.M., Hsyung, N.B., and Cong, D.Z. (1995) The role of porosity in filtration. XII: Filtration with sedimentation. AIChE J., 41 (5): 1153.
45. Font, R. and Hernandez, A. (2000) Filtration with sedimentation: application of Kynch's theorems. Sep. Sci. Tech., 35 (2): 183.
46. Burger, R., Concha, F., and Karlsen, K.H. (2001) Phenomenological model of filtration processes. Cake formation and expression. Chem. Eng. Sci., 56 (15): 4537.
47. Tiller, F.M. and Cooper, H.R. (1960) The role of porosity in filtration. IV: Constant pressure filtration. AIChE J., 6 (4): 595.
48. Lanoisellé, J.L., Vorobyov (Vorobiev), E., and Bouvier, J.M. (1996) Modelling of solid-liquid expression for cellular materials. AIChE J., 42 (7): 2057.
49. Corapcioglu, M.Y. and Abboud, N.M. (1990) Cake filtration with particle penetration at the cake surface. Soc. Petroleum Eng./Reservoir Eng. J., 5: 317.
50. Abboud, N.M. and Corapcioglu, M.Y. (1993) Modeling of compressible cake filtration. J. Colloid Interface Sci., 160 (2): 304.
51. Abboud, N.M. and Corapcioglu, M.Y. (1993) Numerical solution and sensitivity analysis of filter cake permeability and resistance to model parameters. Transport in Porous Media, 10: 235.
52. Tien, C., Bai, R., and Ramarao, B.V. (1997) Analysis of cake growth in cake filtration: effect of fine particle retention. AIChE J., 43 (1): 33.
53. Civan, F. (1998) Incompressible cake filtration: mechanism parameters and modelling. AIChE J., 44 (11): 2379.
54. Civan, F. (1998) Practical model for compressive filter cake filtration including fine particle invasion. AIChE J., 44 (11): 2388.
55. Shirato, M., Aragaki, T., Iritani, E., Wakimoto, M., Fujiyoshi, S., and Nanda, S. (1977) Constant pressure filtration of power law non-newtonian fluids. J. Chem. Eng. Jpn., 10(1): 54.
56. Shirato, M., Aragaki, T., and Iritani, E. (1979) Blocking filtration laws for filtration of power law non-newtonian fluids. J. Chem. Eng. Jpn., 12 (8): 162.
57. Shirato, M., Aragaki, T., and Iritani, E. (1980) Analysis of constant pressure filtration of power-law non-newtonian fluids. J. Chem. Eng. Jpn, 13 (1): 61.
58. Murase, T., Iritani, E., Cho, J.H., and Shirato, M. (1989) Determination of filtration characteristics of power-law non-newtonian fluids-solids mixtures under constant-pressure conditions. J. Chem. Eng. Jpn, 22 (1): 65.
59. Kos, P. and Adrian, D.D. (1975) Transport phenomena applied to sludge dewatering. J. Environ. Eng. Division, 101 (EE6): 947.
60. Holdich, R.G. (1990) Solids concentration and pressure profiles during compressible cake filtration. Chem. Eng. Communication, 91: 255.
61. La Heij, E.J. (1994) An analysis of sludge filtration and expression. PhD Thesis of Technische Universiteit Eindhoven, The Netherlands.
62. La Heij, E.J., Kerkhof, A.M., Herwijn, A.J.M., and Coumans, W.J. (1996) Fundamental aspects of sludge filtration and expression. Water Res., 30 (3): 697.
63. Tien, C. and Bai, R. (2003) An assessment of the conventional cake filtration theory. Chem. Eng. Sci., 58 (7): 1323.
64. Bai, R. and Tien, C. (2005) Further work on cake filtration analysis. Chem. Eng. Sci., 60 (2): 301.
65. Kamst, G.F. (1995) Filtration and expression of palm oil slurries as a part of the dry fractionation process. PhD Thesis of Delf University, The Netherlands.
66. Shirato, M., Aragaki, T., Ichimura, K., and Ootsuji, N. (1971) Porosity variation in filter cakes under constant-pressure filtration. J. Chem. Eng. Jpn, 4 (2): 172.
67. Tiller, F.M. and Yeh, C.S. (1987) The role of porosity in filtration. XI: Filtration followed by expression. AIChE J., 33 (8): 1241.
68. Vorobyov (Vorobiev), E., Anikeev, J.V., and Samolyotov, V.M. (1993) Dynamics of filtration and expression: new methods for combined analysis and calculation of the processes with due to account of the cake consolidation dynamics and the filter medium compressibility. Chem. Eng. Proc., 32 (1): 45.
69. Sorensen, P.B. and Hansen, J.Aa. (1993) Extreme solid compressibility in biological sludge dewatering. Water Sci. Tech., 28 (1): 133.
70. La Heij, E.J., Kerkhof, A.M., Kopinga, K., and Pel, L. (1996) Determining porosity profiles during filtration and expression of sewage sludge by NMR imaging. AIChE J., 42 (4): 953.
71. Sedin, P. and Theliander, H. (2004) Local filtration properties of kaolin filter cakes. Trans. Filt. Soc., 4: 65.
72. Andersen, N.P.R., Christensen, M.L., and Keiding, K. (2004) New approach to determining consolidation coefficients using cake-filtration experiments. Powder Tech., 142 (2-3): 98.
73. Whitaker, S. (1986) Flow in porous media III: deformable medium. Transport Porous Media, 1: 3.
74. Whitaker, S. (1986) Flow in porous media I: a theoretical derivation of Darcy's law. Transport Porous Media, 1: 127.
75. Sfair, A.L. (2004) Modélisation des phénoménes de transport en milieu deformable diphasique: prise en compte de la pression de la phase liquide. PhD thesis. Université de Pau et des Pays de l'Adour, France (in french).
76. Landman, K.A. (1992) White, L.R. Determination of the hindered settling factor for flocculated suspensions. AIChE J., 38 (2): 184.
77. Tiller, F.M. and Leu, W.F, (1980) Basic data fitting in filtration, J. Inst. Chem. Eng., 11:61.
78. Abboud, N.M. and Corapcioglu, M.Y. (1993) Pore liquid pressure and porosity variation along the cake thickness, Proc. 6th World Filtration Congress, Nagoya, Japan, 164-169.
79. Zhao, J., Wang, C.H., Lee, D.J., and Tien, C. (2003) Cake consolidation in a compression-permeability cell: effect of side-wall friction. J. Colloid Interface Sci., 262 (1): 60.
80. Zhao, J., Wang, C.H., Lee, D.J., and Tien, C. (2003) Plastic deformation in cake consolidation. J. Colloid Interface Sci., 261 (1): 133.
81. Biot, M.A. (1941) General Theory of three-dimensional consolidation. J. Appl. Phys., 12: 155.
82. Biot, M.A. (1956) General solutions of the equations of elasticity and consolidation for a porous material. J. Appl. Phys, 78: 91.
83. Willis, M.S., Shen, M., and Gray, K.J. (1974) Investigation of the fundamental assumptions relation compression-permeability with filtration. Can. J. Chem. Eng., 52: 331.
84. Tosun, I. and Willis, M.S. (1983) Drag stress - pressure drop relationship in filtration. Chem. Eng. Sci., 38 (3): 485.
85. Tosun, I. and Willis, M.S. (1982) On the validity of the power law approximation in filtration theory. Chem. Eng. Sci., 37 (9): 1421.
86. Tien, C., Teoh, S.K., and Tan, R.B.H. (2001) Cake filtration analysis - The effect of the relationship between the pore liquid pressure and the cake compressive stress. Chem. Eng. Sci., 56 (18): 5361.
87. Rietema, K. (1982) Science and Technology of dispersed two-phase systems. Chem. Eng. Sci., 37 (8): 1125.
88. Ruth, B.F. (1946) Correlating filtration theory with industrial practice. Indus. Eng. Chem., 38 (6): 564.
89. Grace, H.P. (1953) Resistance and compressibility of filter cakes. Part I. Chem. Eng. Prog., 49 (6): 303.
90. Grace, H.P. (1953) Resistance and compressibility of filter cakes. Part II: under conditions of pressure filtration. Chem. Eng. Prog., 49 (7): 367.
91. Tiller, F.M. (1955) The role of porosity in filtration. II: Analytical equations for constant rate filtration. Chem. Eng. Prog., 51 (6): 282.
92. Tiller, F.M. and Shirato, M. (1964) The role of porosity in filtration. VI: New definition of filtration resistance. AIChE J., 10 (1): 61.
93. Fathi-Najafi, M. and Theliander, H. (1995) Determination of local filtration properties at constant pressure. Sep. Tech., 5: 165.
94. Teoh, S.K., Tan, R.B.H., He, D., and Tien, C. (2001) A multifunction test cell for cake filtration studies. Trans. Filt. Soc., 1:81.
95. Tiller, F.M. and Kwon, J.H. (1998) The role of porosity in filtration. XIII: Behavior of highly compactible cakes. AIChE J., 44 (10): 2159.
96. Tiller, F.M., Li, W.P., and Lee, J.B. (2001) Determination of the critical pressure drop for filtration of super-compactible cakes. Water Sci. Tech., 44 (10): 171.
97. Tien, C. and Bai, R. (2004) Numerical analysis of cake filtration, 9th World Filtration Congress, New Orleans.
98. Teoh, S.K., Tan, R.B.H., and Tien, C. (2006) A new procedure for determining specific filter cake resistance from filtration data. Chem. Eng. Sci., 61 (15): 4957.
99. Teoh, S.K., Tan, R.B.H., and Tien, C. (2006) Analysis of cake filtration data- A critical assessment of conventional filtration theory. AIChE J., 52 (10): 3427.
100. Johansson, C., Sedin, P., and Theliander, H. (2004) Determination of local filtration properties, 9th World Filtration Congress, New Orleans.
101. Tiller, F.M. and Li, W.P. (2003) Radial flow for super-compactible cakes. Sep. Sci. Tech., 38 (4): 733.
102. Couturier, S., Valat, M, Vaxelaire, J., and Puiggali, J.R. (2003) Liquid pressure measurement in Filtration-Compression Cell. Sep. Sci. Tech., 38 (5): 1051.
103. Tiller, F.M., Lu, R., Kwon, J.H., and Lee, D.J. (1999) Variable flow rate in compactible filter cakes. Water Res., 33 (1): 15.
104. Cleveland, T.G., Tiller, P.M., and Lee, J.B. (1996) Theory of filtration of highly compactable biosolids. Water Sci. Tech., 34: 299.
105. Holdich, R.G. (1993) Prediction of solid concentration and height in a compressible filter cake. Inter. J. Mineral Proc., 39 (3-4): 157.
106. Shirato, M., Murase, T., Negawa, M., and Moridera, H. (1971) Analysis of expression operations. J. Chem. Eng. Jpn, 4 (3): 263.
107. Shirato, M., Murase, T., Kato, H., and Fukaya, S. (1970) Fundamental analysis for expression under constant pressure. Filt. Sep., 1: 277.
108. Channell, G.M. and Zukoski, C.F. (1997) Shear and compressive rheology of aggregated alumina suspensions. AIChE J., 43 (7): 1700.
109. Eberl, M., Landman, K.A., and Scales, P.J. (1995) Scale-up procedures and test methods in filtration: a test case on kaolin plant data. Colloids Surfaces A, 103 (1-2): 1.
110. Green, M.D., Eberl, M., and Landman, K.A. (1996) Compressive yield stress of flocculated suspensions: determination via experiment. AIChE J., 42 (8): 2308.
111. Stickland, A.D., de Kretser, R.G., and Scales, P.J. (2005) Nontraditional constant pressure filtration behaviour. AIChE J., 51 (9): 2481.
112. Northcott, K.A., Snape, I., Scales, P.J., and Stevens, G.W. (2005) Dewatering behaviour of water treatment sludges associated with contamined site in Antartica. Chem. Eng. Sci., 60 (24): 6835.
113. Leclerc, D. and Minery, E. (1980) Comparaison du comportement des boues floculées et non floculées lors de leur déshydratation par compression mécanique. Tribune du Cebedeau (in French) 443: 441.
114. Shirato, M., Murase, T., Negawa, M., and Senda, T. (1970) Fundamental studies of expression under variable pressure. J. Chem. Eng. Jpn., 3 (1): 105.
115. Murase, T., Iwata, M., Adachi, T., Gmachowski, L., and Shirato, M. (1989) An evaluation of compression-permeability characteristics in the intermediate concentration range by use of centrifugal and constant-rate compression techniques. J. Chem. Eng. Jpn, 22 (4): 378.
116. Rebouillat, S., Leclerc, D., and Baluais, G. (1985) La déshydratation par filtration-pressage. Modélisation de la compression unidirectionnelle. Entropie, (in French) 121: 13.
117. Murase, T., Iritani, E., Cho, J.H., Nakanomori, S., and Shirato, M. (1987) Determination of filtration characteristics due to sudden reduction in filtration area of filter cakes surface. J. Chem. Eng. Jpn, 20 (3): 246.
118. Murase, T., Iritani, E., Cho, J.H., and Shirato, M. (1989) Determination of filtration characteristics based upon filtration tests under step-up pressure conditions. J. Chem. Eng. Jpn, 22 (4): 373.
119. Lanoisellé, J.L., Vorobyov (Vorobiev), E., and Bouvier, J.M. (1994) Modélisation du pressage à pression constante. Cas des produits à structure cellulaire. Entropie (in French) 186: 39.
120. Wells, S.A. (1990) Determination of sludge properties for modeling compressible cake filtration from specific resistance tests. Proc. ASCE National Environmental Engineering Conference, Washington, D.C., 125-131.
121. Shirato, M., Aragaki, T., Mori, R., and Sawamoto, K. (1968) Predictions of constant pressure and constant rate filtrations based upon an approximate correction for side wall friction in compression permeability cell data. J. Chem. Eng. Jpn, 1 (1): 186.
122. Tiller, F.M., Haynes, F., Jr., and Lu, W.M. (1972) The role of porosity in filtration. VII: Effect of side-wall friction in compression-permeability cells. AIChE J., 18(1): 13.
123. Tiller, F.M. and Lu, W.M. (1972) The role of porosity in filtration. VIII: Cake nonuniformity in compression-permeability cells. AIChE J., 18 (3): 569.
124. Lu, W.M., Huang, Y.P., and Hwang, K.J. (1998) Methods to determine the relation ship between cake properties and solid compressive pressure. Sep. Purific. Tech., 13 (1): 9.
125. Lu, W.M., Huang, Y.P., and Hwang, K.J. (1998) Stress distribution in a confined wet cake in the compression-permeability cell and its application. Powder Tech., 97 (1): 16.
126. Buscall, R., Me Gowan, I.J., Mills, P.D.A., Stewart, R.F., Sutton, D., White, L.R., and Yates, G.E. (1987) The rheology of strongly-floculated suspensions. J. Non-Newtonian Fluid Mech., 24: 183.
127. Raha, S., Khilar, K.C., Pradip, and Kapur, P.C. (2005) Rapid determination of compressive yield stress of dense suspensions by a mean-phi (Φ̄) model of high pressure filtration. Powder Tech., 155 (1): 42.
128. Aziz, A.A.A., de Krester, R.G., Dixon, D.R., and Scales, P.J. (2000) The characterisation of slurry dewatering. Water Sci. Tech., 41 (8): 9.
129. Usher, S.P., de Kretser, R.G., and Scales, P.J. (2001) Validation of a new filtration technique for dewaterability characterization. AIChE J., 47 (7): 1561.
130. de Kretser, R.G., Usher, S.P., Scales, P.J., Boger, D.V., and Landman, K.A. (2001) Rapid filtration measurement of dewatering design and optimisation parameters. AIChE J., 47 (8): 1758.
131. Stickland, A.D., de Kretser, R.G., Scales, P.J., Usher, S.P., Hillis, P., and Tillotson, M.R. (2006) Numerical modelling of fixed-cavity plate-and-frame filtration: Formulation, validation and optimisation. Chem. Eng. Sci., 61 (12): 3818.
132. Shirato, M., Murase, T., Iwata, M., and Nakatsuka, S. (1986) The Terzaghi-Voigt combined model for constant-pressure consolidation of filter cakes and homogeneous semi-solid materials. Chem. Eng. Sci., 41 (12): 3213.
133. Suclje, L. (1970) Rheological Aspects of Soil Mechanics; Wiley Interscience: New York.
134. Shirato, M., Iwata, M., Wakita, M., Murase, T., and Hayashi, N. (1987) Constantrate expression of semisolid materials. J. Chem. Eng. Jpn, 20 (1): 1.
135. Shirato, M., Murase, T., Tokunaga, A., and Yamada, O. (1974) Calculations of consolidation period in expression operations. J. Chem. Eng. Jpn, 1 (3): 229.
136. Shirato, M., Murase, T., Hayashi, N., and Fukushima, T. (1977) Constant pressure expression of solid liquid mixtures with medium resistance. J. Chem. Eng. Jpn, 10 (2): 154.
137. Chang, I.L. and Lee, D.J. (1998) Ternary expression stage in biological sludge dewatering. Water Res., 32 (3): 905.
138. Chu, C.P. and Lee, D.J. (1999) Three stages of consolidation dewatering of sludges. J. Environ. Eng., 125 (10): 959.
139. Chu, C.P., Lee, D.J., and Huang, C. (1998) The role of ionic surfactants in compression dewatering of alum sludge. J. Colloid Interface Sci., 206 (1): 181.
140. Shirato, M., Murase, T., Atsumi, K., Aragaki, T., and Noguchi, T. (1979) Industrial expression equation for semi-solid materials of solid-liquid mixture under constant pressure. J. Chem. Eng. Jpn, 12 (1): 51.
141. Shirato, M., Murase, T., Atsumi, K., Nagami, T., and Suzuki, H. (1978) Creep constants in expression of compressible solid-liquid mixtures. J. Chem. Eng. Jpn, 11 (4): 334.
142. Vaxelaire, J. and Cézac, P. (2004) Moisture distribution in activated sludges: a review. Water Res., 38 (9): 2215.
143. Shirato, M., Sambuichi, M., and Okamura, S. (1963) Filtration behavior of a mixture of two slurries. AIChE J., 9 (5): 599.
144. Sorensen, P.B., Agerbaek, M.L., and Sorensen, B.L. (1996) Predicting cake filtration using specific filtration flow rate. Water Environ. Res., 68 (7): 1151.
145. Atsumi, K. and Akiyama, T. (1975) A study of cake filtration-formulation as a Stefan problem. J. Chem. Eng. Jpn, 8 (6): 487.
146. Sherwood, J.D. (1997) Initial and final stages of compressible filter cake compaction. AIChE J., 43 (6): 1488.
147. Sherwood, J.D. and Meeten, G.H. (1997) The filtration properties of compressible mud filter cakes. J. Petrol. Sci. Eng., 18 (1-2): 73.
148. Bowen, W.R. and Jenner, F. (1995) Dynamic ultrafiltration model for charged colloidal dispersions: A Wigner-Seitz cell approach. Chem. Eng. Sci., 50 (11): 1707.
149. Kapur, P.C. (1999) Some applications of the AMPC model of the shear yield stress of particle fluids. Colloids Surfaces A, 146: 25.
150. Kapur, P.C., Scales, P.J., Boger, D.V., and Healy, T.W. (1997) Yield stress of suspensions loaded with size distributed particles. AIChE J., 43 (5): 1171.
151. Scales, P.J., Johnson, S.B., Healy, T.W., and Kapur, P.C. (1998) Shear yield stress of partially flocculated colloidal suspensions. AIChE J., 44 (3): 538.
152. Dustan, A.C., Cohen, B., and Petrie, J.G. (2005) Modelling dewatering behaviour through an understanding of solids formation process. Part II-solids separation considerations. Adv. Colloid Interface Sci., 113: 85-97.
153. Koenders, M.A. and Wakeman, R.J. (1996) The initial stages of compact formation from suspensions by filtration. Chem. Eng. Sci., 51 (16): 3897.
154. Koenders, M.A. and Wakeman, R.J. (1997) Intial deposition of interacting particles by filtration of dilute suspensions. AIChE J., 43 (4): 946.
155. Koenders, M.A. and Wakeman, R.J. (1997) Filter cake formation from structured suspensions. Trans. IChemE A, 75: 309.
156. Sambuichi, M., Nakakura, H., Nishigaki, F., and Osasa, K. (1994) Dewatering of gels by constant pressure expression. J. of Chem. Eng. Jpn, 27 (5): 616.
157. Novak, J.T., Agerbaek, M.L., Sorensen, B.L, and Hansen, J.Aa. (1999) Conditioning, filtering and expressing waste activated sludge. J. Environ. Eng., 125 (9): 816.
158. Wells, S.A. (1996) Mathematical modeling of a plate- and -frame-press. Adv. in Filtration Separation Tech, 10, ed.; American Filtration Separation Society, 376-381.
159. Wells, S.A. and Sivakumaran, K. (1990) Two-dimmensionnal modeling of dewatering in a belt filter press, Proc. ASCE National Environmental Engineering Conference, Washington, D.C., 132-139.