Prediction of interfacial bond failure of FRP-concrete surface

Journal of Composites for Construction

Volumn 11, Issue 4, 2007, Pages 427-436

  Toutanji, Houssam ^a   Saxena, Priyam ^a   Zhao, Liangying ^a   Ooi, Teng ^a  

^a University of Alabama in Huntsville   (United States)

Author keywords

Anchorage; Bonding strength; Concrete, reinforced; Databases; Failures; Fiber reinforced polymers; Shear tests

Indexed keywords

ANCHORAGE; DEBONDING FAILURE; INTERFACIAL DEBONDING; SHEAR TESTS;

BOND STRENGTH (MATERIALS); CODES (STANDARDS); DATABASE SYSTEMS; FIBER REINFORCED PLASTICS; MATHEMATICAL MODELS; SURFACE TENSION;

REINFORCED CONCRETE;

EID: 34547210185     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)1090-0268(2007)11:4(427)     Document Type: Article

References (37)

1. American Concrete Institute (ACI). (2002). " Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.. " ACI 440.2R-02, Farmington Hills, Mich.
2. Adhikary, B. B., and Mutsuyoshi, H. (2001). " Study on the bond between concrete and externally bonded CFRP sheet.. " Proc., 6th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-5), 1, 371-378.
3. Bizindavyi, L., and Neale, K. W. (1999). " Transfer lengths and bond strengths for composites bonded to concrete.. " J. Compos. Constr., 3 (4), 153-160.
4. Brosens, K., and van Gemert, D. (1997). " Anchoring stresses between concrete and carbon fiber reinforced laminates.. " Proc., 3rd Int. Symp. Non-Metallic (FRP) Reinforcement for Concrete Struct., Vol. 1, Japan Concrete Institute, Sapporo, 271-278.
5. Chajes, M. J., Finch, W. W., Jr., Januszka, T. F., and Thonson, T. A., Jr. (1996). " Bond and force transfer of composite material plates bonded to concrete.. " ACI Struct. J., 93 (2), 295-303.
6. Chen, J. F., and Teng, J. G. (2001). " Anchorage strength models for FRP and steel plates bonded to concrete.. " J. Struct. Eng., 127 (7), 784-791.
7. Chen, J. F., Yang, Z. J., and Holt, G. D. (2001). " FRP or steel plate-to-concrete bonded joints: Effect of tests methods on experimental bond strength.. " Steel Compos. Struct., 1 (2), 231-244.
8. Dai, J., Ueda, T., and Sato, Y. (2005). " Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method.. " J. Compos. Constr., 9 (1), 52-62.
9. F́d́ration Internationale du B́ton (FIB). (2001). " Design and use of externally bonded FRP reinforcement for RC structures.. " FIB Bulletin 14, Lausanne, Switzerland.
10. Fuquan, X. U., Jianguang, G., and Yu, C. (2001). " Bond strength between CFRP sheets and concrete.. " Proc., FRP Composites in Civil Engineering, 1, 357-364.
11. Hiroyuki, Y., and Wu, Z. (1997). " Analysis of debonding fracture properties of CFS strengthened member subject to tension.. " Proc., 3rd Int. Symp. on Non-Metallic (FRP) Reinforcement for Concrete Structures, Vol. 1, Japan Concrete Institute, Sapporo, Japan, 287-294.
12. Holzenkämpfer, O. (1994). " Ingenieurmodelle des verbundes geklebter bewehrung für betonbauteile.. " Dissertation, Technische Univ. Braunschweig, Braunschweig, Germany (in German).
13. Japan Concrete Institute (JCI). (2003). " Technical report of technical committee on retrofit technology.. " Proc., Int. Symp. on the Latest Achievement of Technology and Research on Retrofitting Concrete Structures, Sapporo, Japan.
14. Kamiharako, A., Shimomura, T., Maruyama, K., and Nishida, H. (1999). " Analysis of bond and bonding behavior of continuous fiber sheets bonded on concrete.. " JSCE J. Mater., Concr. Struct. Pavements, 634, 197-208 (in Japanese).
15. Khalifa, A., Gold, W. J., Nanni, A., and Aziz, A. (1998). " Contribution of externally bonded FRP to shear capacity of RC flexural members.. " J. Compos. Constr., 2 (4), 195-202.
16. Lu, X. Z., Teng, J. G., Ye, L. P., and Jiang, J. J. (2005). " Bond-slip models for FRP sheets/plates bonded to concrete.. " Eng. Struct., 27 (6), 920-937.
17. Maeda, T., Asano, Y., Sato, Y., Ueda, T., and Kakuta, Y. (1997). " A study on bond mechanism of carbon fiber sheet.. " Proc., 3rd Int. Symp. on Non-Metallic (FRP) Reinforcement for Concrete Structures, Vol. 1, Japan Concrete Institute, Sapporo, Japan, 279-285.
18. Nakaba, K., Toshiyuki, K., Tomoki, F., and Hiroyuki, Y. (2001). " Bond behavior between fiber-reinforced polymer laminates and concrete.. " ACI Struct. J., 98 (3), 359-367.
19. Neubauer, U., and Rostasy, F. S. (1997). " Design aspects of concrete structures strengthened with externally bonded CFRP plates.. " Proc., 7th Int. Conf. on Structural Faults and Repairs, ECS, Edinburgh, Scotland, 2, 109-118.
20. Niedermeier, R. (1996). " Stellungnahme zur richtlinie für das verkleben von betonbauteilen durch ankleben von stahllaschen-Entwurf März 1996.. " Schreiben 1390 vom 30.10.1996 des Lehrstuhls für Massivbau, Technische Univ. München, Munich, Germany (in German).
21. Ren, H. T. (2003). " Study on basic theories and long time behavior of concrete structures strengthened by fiber reinforced polymers.. " Graduation thesis, Dalian Univ. of Technology, Dalian, China (in Chinese).
22. Seracino, R. (2001). " Axial intermediate crack debonding of plates glued to concrete surfaces.. " Proc., FRP Composites in Civil Engineering, 1, 365-372.
23. Sharma, S. K., Ali, M. S. M., Goldar, D., and Sikdar, P. K. (2006). " Plate-concrete interfacial bond strength of FRP and metallic plated concrete specimens.. " Composites, Part B, 37 (1), 1-10.
24. Smith, S. T., and Teng, J. G. (2002). " FRP-strengthened RC beams. I: Review of debonding strength models.. " Eng. Struct., 24 (4), 385-395.
25. Takeo, K., Matsushita, H., Makizumi, T., and Nagashima, G. (1997). " Bond characteristics of CFRP sheets in the CFRP bonding technique.. " Proc., Japan Concrete Institute, 19 (2), 1599-1604.
26. Taljsten, B. (1996). " Strengthening of concrete prisms using the plate bonding technique.. " Int. J. Fract., 82, 253-266.
27. Tan, Z. (2002). " Experimental research for RC beam strengthened with GFRP.. " Graduation thesis, Tsinghua Univ., Beijing, China (in Chinese).
28. Tanaka, T. (1996). " Shear resisting mechanism of reinforced concrete beams with CFS as shear reinforcement.. " Graduation thesis, Hokkaido Univ., Kita-ku, Japan.
29. Teng, J. G., Smith, S. T., Yao, J., and Chen, J. F. (2003). " Intermediate crack-induced debonding in RC beams and slabs.. " Constr. Build. Mater., 17 (6-7), 447-462.
30. Ueda, T., Sato, Y., and Asano, Y. (1999). " Experimental study on bond strength of continuous carbon fiber sheet.. " Proc., 4th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures SP-188, American Concrete Institute, Farmington Hills, Mich., 407-416.
31. Wu, Z. S., Yuan, H., Hiroyuki, Y., and Toshiyuki, K. (2001). " Experimental/analytical study on interfacial fracture energy and fracture propagation along FRP-concrete interface.. " ACI Int. SP-201-8, American Concrete Institute, Farmington Hills, Mich., 133-52.
32. Yang, Y. X., Yue, Q. R., and Hu, Y. C. (2001). " Experimental study on bond performance between carbon fiber sheets and concrete.. " J. Build. Struct., 22 (3), 36-42 (in Chinese).
33. Yao, J., Teng, J. G., and Chen J. F., (2005). " Experimental study on FRP-to-concrete bonded joints.. " Composites, Part B, 36 (2), 99-113.
34. Yuan, H., Teng, J. G., Seracino, R., Wu, Z., and Yao, J. (2004). " Full-range behavior of FRP-to-concrete bonded joints.. " Eng. Struct., 26 (5), 553-565.
35. Yuan, H., and Wu, Z. (1999). " Interfacial fracture theory in structures strengthened with composite of continuous fiber.. " Proc., Symp. of China and Japan: Science and Technology of the 21st Century, Tokyo, 142-155.
36. Zhao, H. D., Zhang, Y., and Zhao, M. (2000). " Research on the bond performance between CFRP plate and concrete.. " Proc., 1st Conf. on FRP Concrete Structures of China, 247-253.
37. Zhao, L. (2005). " Characterizations of RC beams strengthened with carbon fiber sheets.. " Graduation thesis, Dept. of Civil and Environmental Engineering, Univ. of Alabama, Huntsville, Ala.