Modeling cross anisotropy in granular materials

Journal of Engineering Mechanics

Volumn 133, Issue 8, 2007, Pages 919-932

  Abelev, Andrei V ^a   Gutta, Suresh K ^b   Lade, Poul V ^c   Yamamuro, Jerry A ^d  

^a NAVAL RESEARCH LABORATORY   (United States)

^b AGES Inc   (United States)

^c Catholic Univ of America ^*  (United States)

^d OREGON STATE UNIVERSITY   (United States)

Author keywords

Anisotropy; Compression tests; Granular materials; Isotropic materials; Models; Triaxial tests

Indexed keywords

CROSS ANISOTROPY; PRINCIPAL STRESS; TRIAXIAL TEST;

COMPRESSION TESTING; CONSTITUTIVE MODELS; ELASTOPLASTICITY; FRICTION; HARDNESS; SAND; STRESSES;

ANISOTROPY;

ANISOTROPY; COMPRESSION TESTING; CONSTITUTIVE MODELS; ELASTOPLASTICITY; FRICTION; HARDNESS; SAND; STRESSES;

ANISOTROPY; COMPRESSION; DEFORMATION; ELASTOPLASTICITY; GRANULAR MEDIUM; LOADING; MODELING; TRIAXIAL TEST;

CALIFORNIA; NORTH AMERICA; SANTA MONICA; UNITED STATES;

EID: 34547097551     PISSN: 07339399     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0733-9399(2007)133:8(919)     Document Type: Article

References (64)

1. Abelev, A. V. (2001). "Cross-anisotropic behavior of granular materials under three-dimensional loading conditions" Ph.D. thesis, Johns Hopkins Univ., Baltimore, Md.
2. Abelev, A. V., and Lade, P. V. (2003). "Effects of cross anisotropy on three-dimensional behavior of sand. I: Stress-strain behavior and shear banding" J. Eng. Mech. JENMDT0733-939910.1061/ (ASCE)0733-9399(2003)129:2(160), 129(2), 160-166.
3. Abelev, A. V., and Lade, P. V. (2004). "Characterization of failure in cross-anisotropic soils" J. Eng. Mech. JENMDT0733-939910.1061/ (ASCE)0733-9399(2004)130:5(599), 130(5), 599-606.
4. Anandarajah, A. M., and Dafalias, Y. F. (1985). "Anisotropic hardening bounding surface constitutive model for clays" Proc., 5th Int. Conf. Num. Meth. Geomech., Balkema, Rotterdam, The Netherlands, 267-275.
5. Anandarajah, A. M., and Dafalias, Y. F. (1986). "Bounding surface plasticity. III: Application to anisotropic cohesive soils" J. Eng. Mech. JENMDT0733-9399, 112(2), 1292-1318.
6. Arthur, J. R. F., and Menzies, B. K. (1972). "Inherent anisotropy in a sand" Geotechnique GTNQA80016-8505, 22(1), 115-128.
7. Bazant, Z. P., Ansal, A. M., and Krizek, R. J. (1979). "Viscoplasticity of transversely isotropic clays" J. Engrg. Mech. Div. JMCEA30044-7951, 105(4), 549-565.
8. Bazant, Z. P., Caner, F. C., Carol, I., Adley, M. D., and Akers, S. A. (2000). "Microplane model M4 for concrete. I: Formulation with work-conjugate deviatoric stress" J. Eng. Mech. JENMDT0733-939910.1061/(ASCE)0733-9399(2000)126:9(944), 126(9), 944-953.
9. Bazant, Z. P., and Prat, P. C. (1987). "Creep of anisotropic clay: New microplane model" J. Eng. Mech. JENMDT0733-9399, 113(7), 1050-1064.
10. Boehler, J. P., and Sawczuk, A. (1977). "On yielding of oriented solids" Acta Mech. AMHCAP0001-597010.1007/BF01180085, 27, 185-206.
11. Carol, I., Jirasek, M., and Bazant, Z. (2001). "A thermodynamically consistent approach to microplane theory. Part I. Free energy and consistent microplane stresses" Int. J. Solids Struct. IJSOAD0020-768310.1016/S0020-7683(00)00212-2, 38, 2921-2931.
12. Casagrande, A., and Carillo, N. (1944). "Shear failure of anisotropic materials" J. Boston Soc. Civ. Eng. JBOSAS0006-8012, 31(4), 74-87.
13. Crouch, R. S., and Wolf, J. P. (1995). "On a three-dimensional anisotropic plasticity model for soil" Geotechnique GTNQA80016-8505, 45(2), 301-305.
14. Dafalias, Y. F. (1987). "An anisotropic critical state clay plasticity model" Constitutive laws for engineering materials: Theory and applications, C. S. Desai, eds., 513-521.
15. El-Sohby, M. A., and Andrews, K. Z. (1973). "Experimental examination of sand anisotropy" Proc., 8th Int. Conf. Soil Mech., 1, 103-109.
16. Ghaboussi, J., and Momen, H. (1984). "Plasticity model for inherently anisotropic behavior of sands" Int. J. Numer. Analyt. Meth. Geomech. IJNGDZ0363-906110.1002/nag.1610080102, 8(1), 1-17.
17. Gutta, S. K. (2003). "Modeling large three-dimensional stress reversals in cross-anisotropic sands." Ph.D. thesis, Univ. of Delaware, Newark, Del.
18. Inel, S., and Lade, P. V. (1997). "Rotational kinematic hardening model for sand. Part II: Characteristic work hardening law and predictions" Comput. Geotech. ZZZZZZ0266-3524, 21(3), 217-234.
19. Iwan, W. D. (1967). "On a class of models for the yielding behavior of continuous and composite systems" J. Appl. Mech. JAMCAV0021-8936, 34, 612-617.
20. Kavvadas, M. J. (1983). "A constitutive model for clays based on non-associative elasto-plasticity" Proc., Int. Conf. Constitutive Laws for Engineering Materials: Theory and Applications, Elsevier, New York, 263-270.
21. Kim, M. K., and Lade, P. V. (1988). "Single hardening constitutive model for frictional materials. I. Plastic potential function" Comput. Geotech. ZZZZZZ0266-3524, 5, 307-324.
22. Kirkgard, M. M., and Lade, P. V. (1991). "Anisotropy of normally consolidated San Francisco Bay mud" Geotech. Test. J. GTJODJ0149-6115, 14(3), 231-246.
23. Kirkgard, M. M., and Lade, P. V. (1993). "Anisotropic three-dimensional behavior of a normally consolidated clay." Can. Geotech. J.CGJOAH0008-3674, 30, 848-858.
24. Lade, P. V. (1977). "Elastoplastic stress-strain theory for cohesionless soil with curved yield surfaces" Int. J. Solids Struct. IJSOAD0020-768310.1016/0020-7683(77)90073-7, 13, 1019-1035.
25. Lade, P. V. (1990). "Single-hardening model with application to NC clay" J. Geotech. Engrg. JGENDZ0733-9410, 116(3), 394-414.
26. Lade, P. V., and Abelev, A. V. (2003). "Effects of cross anisotropy on three-dimensional behavior of sand. II: Volume change behavior and failure" J. Eng. Mech. JENMDT0733-939910.1061/ (ASCE)0733-9399(2003)129:2(167), 129(2), 167-174.
27. Lade, P. V., and Abelev, A. V. (2005). "Characterization of cross-anisotropic soil deposits from isotropic compression tests" Soils Found. SOIFBE0038-0806, accepted.
28. Lade, P. V., and Inel, S. (1997). "Rotational kinematic hardening model for sand. Part I: Concept of rotating yield and plastic potential surfaces" Comput. Geotech. ZZZZZZ0266-3524, 21(3), 183-216.
29. Lade, P. V., and Kim, M. K. (1988a). "Single hardening constitutive model for frictional materials. II. Yield criterion and plastic work contours" Comput. Geotech. ZZZZZZ0266-3524, 6, 13-29.
30. Lade, P. V., and Kim, M. K. (1988b). "Single hardening constitutive model for frictional materials. III. Comparisons with experimental data" Comput. Geotech. ZZZZZZ0266-3524, 6, 31-47.
31. Lade, P. V., and Nelson, R. B. (1987). "Modeling the elastic behavior of granular materials" Int. J. Numer. Analyt. Meth. Geomech. IJNGDZ0363-906110.1002/nag.1610110507, 11, 512-524.
32. Lewin, P. I., Yamada, Y., and Ishihara, K. (1982). "Correlated drained and undrained 3D tests on loose sand" Proc., IUTAM Conf. Deformation and Failure of Granular Materials, Balkema, Rotterdam, The Netherlands, 419-429.
33. Li, X. S., and Dafalias, Y. F. (2002). "Constitutive modeling of inherently anisotropic sand behavior" J. Geotech. Geoenviron. Eng. JGGEFK1090-024110.1061/(ASCE)1090-0241(2002)128:10(868), 128(10), 868-880.
34. Liang, R. Y., and Ma, F. (1992a). "Anisotropic plasticity model for undrained behavior of clays. I: Theory" J. Geotech. Engrg. JGENDZ0733-9410, 118(2), 229-245.
35. Liang, R. Y., and Ma, F. (1992b). "Anisotropic plasticity model for undrained behavior of clays. II: Verification" J. Geotech. Engrg. JGENDZ0733-9410, 118(2), 246-265.
36. Ling, H. I., Yue, D., Kaliakin, V. N., and Themelis, N. J. (2002). "Anisotropic elastoplastic bounding surface model for cohesive soils" J. Eng. Mech. JENMDT0733-939910.1061/ (ASCE)0733-9399(2002)128:7(748), 128(7), 748-758.
37. Mahmood, A., and Mitchell, J. K. (1974). "Fabric-property relationship in fine granular materials" Clay Miner. CLMIAF0009-855810.1346/CCMN.1974.0220506, 22(516), 397-408.
38. Mahmood, A., Mitchell, J. K., and Lindblom, U. (1976). "Effect of specimen preparation method on grain arrangement and compressibility in sand" Soil Specimen Prep. Lab. Testing, ASTM STP 599, West Conshohocken, Pa., 169-192.
39. Masad, E., and Muhunthan, B. (2000). "Three-dimensional characterization and simulation of anisotropic soil fabric" J. Geotech. Geoenviron. Eng. JGGEFK1090-024110.1061/ (ASCE)1090-0241(2000)126:3(199), 126(3), 199-207.
40. Matsuoka, H., and Ishizaki, H. (1981). "Deformation and strength of anisotropic soil" Proc., Int. Conf. Soil Mech. Found. Eng., 1, 699-702.
41. Mroz, Z. (1967). "On the description of anisotropic work hardening" J. Mech. Phys. Solids JMPSA80022-509610.1016/ 0022-5096(67)90030-0, 15, 163-175.
42. Nakata, Y., Hyodo, M., Murata, H., and Yasufuku, N. (1998). "Flow deformation of sands subjected to principal stress rotation" Soils Found. SOIFBE0038-0806, 38(2), 115-128.
43. Nova, R., and Sacchi, G. (1982). "A model of the stress-strain relationship of the orthotropic geologic media" J. Mec. Theor. Appl. JMTADB0750-7240, 1(6), 927-949.
44. Ochiai, H., and Lade, P. V. (1983). "Three-dimensional behavior of sand with anisotropic fabric" J. Geotech. Engrg. JGENDZ0733-9410, 109(10), 1313-1328.
45. Oda, M. (1972a). "Initial fabrics and their relations to mechanical properties of granular materials" Soils Found. SOIFBE0038-0806, 12(1), 17-36.
46. Oda, M. (1972b). "The mechanism of fabric changes during compressional deformation of sand" Soils Found. SOIFBE0038-0806, 12(2), 1-18.
47. Oda, M. (1981). "Anisotropic strength of cohesionless sands" J. Geotech. Engrg. Div. AJGEB60093-6405, 107(9), 1219-1231.
48. Oda, M., and Nakayama, H. (1988). "Introduction of inherent anisotropy of soils in the yield function" Micromechanics of Granular Materials, M. Satake and J. T. Jenkins, eds., Elsevier, Amsterdam, 81-90.
49. Oda, M., and Nakayama, H. (1989). "Yield function for soil with anisotropic fabric" J. Eng. Mech. JENMDT0733-9399, 115(1), 89-104.
50. Oka, F., Kimoto, S., Kobayashi, H., and Adachi, T. (2002). "Anisotropic behavior of soft sedimentary rock and a constitutive model" Soils Found. SOIFBE0038-0806, 42(5), 59-70.
51. Pande, G. N., and Sharma, K. G. (1981). "Time-dependent multilaminate model for clay-A numerical study of the influence of rotation of principal stress axes" Proc., Implementation of Computer Procedures and Stress-Strain Laws in Geotech. Engrg., Vol. II, Acorn Press, Durham, N.C., 575-590.
52. Pande, G. N., and Xiong, W. (1982). "An improved multilaminate model of jointed rock masses" Proc., Int. Symp. on Numer. Models in Geomech., R. Dungar, G. N. Pande, and G. A. Studer, eds., Balkema, Rotterdam, The Netherlands, 218-226.
53. Pietruszczak, S., and Pande, G. N. (2001). "Description of soil anisotropy based on multi-laminate framework" Int. J. Numer. Analyt. Meth. Geomech. IJNGDZ0363-906110.1002/nag.125, 25(2), 197-206.
54. Prevost, J. H. (1977). "Mathematical modeling of monotonic and cyclic undrained clay behavior" Int. J. Numer. Analyt. Meth. Geomech. IJNGDZ0363-906110.1002/nag.1610010206, 1, 195-216.
55. Prevost, J. H. (1978). "Plasticity theory for soil stress-strain behavior" J. Engrg. Mech. Div. JMCEA30044-7951, 104(5), 1117-1194.
56. Prevost, J. H. (1982). "Two-surface versus multi-surface plasticity theories: A critical assessment" Int. J. Numer. Analyt. Meth. Geomech. IJNGDZ0363-906110.1002/nag.1610060305, 6, 323-328.
57. Shapiro, S., and Yamamuro, J. A. (2003). "Effects of silt on three-dimensional stress-strain behavior of loose sand" J. Geotech. Geoenviron. Eng. JGGEFK1090-024110.1061/(ASCE)1090-0241(2003)129:1(1), 129(1), 1-11.
58. Tobita, Y. (1989). "Fabric tensors" Mechanics of Granular Materials, Report from TC13, Int. Soc. of Soil Mechanics and Foundation Engineering, M. Satake, ed., Rio De Janeiro, 6-9.
59. Wong, R. K. S., and Arthur, J. R. F. (1985). "Induced and inherent anisotropy in sand" Geotechnique GTNQA80016-8505, 35(4), 471-481.
60. Yamada, Y., and Ishihara, K. (1979). "Anisotropic deformation characteristics of sand under three dimensional stress conditions" Soils Found. SOIFBE0038-0806, 19(2), 79-94.
61. Yamada, Y., and Ishihara, K. (1981). "Undrained deformation characteristics of loose sand under three-dimensional stress conditions" Soils Found. SOIFBE0038-0806, 21(1), 97-107.
62. Yoshimine, M., Ishihara, K., and Vargas, W. (1998). "Effects of principal stress direction and intermediate principal stress on undrained shear behavior of sand" Soils Found. SOIFBE0038-0806, 38(3), 179-188.
63. Yu, S., and Dakoulas, P. (1993). "General stress-dependent elastic moduli for cross-anisotropic soils" J. Geotech. Engrg. JGENDZ0733-941010.1061/(ASCE)0733-9410(1993)119:10(1568), 119(10), 1568-1586.
64. Zienkiewicz, O. C., and Pande, G. N. (1977). "Time-dependent multi-laminate model of rocks - A numerical study of deformation and failure of rock masses" Int. J. Numer. Analyt. Meth. Geomech. IJNGDZ0363-906110.1002/nag.1610010302, 1, 219-247.