Effects of silt on three-dimensional stress-strain behavior of loose sand

Journal of Geotechnical and Geoenvironmental Engineering

Volumn 129, Issue 1, 2003, Pages 1-11

  Shapiro, Saul ^a   Yamamuro, Jerry A ^b  

^a Clarkson University   (United States)

^b UNIVERSITY OF DELAWARE   (United States)

Author keywords

Cohesionless sand; Silts; Stress strain relations

Indexed keywords

SAND; STRAIN; STRESS ANALYSIS; VOLUMETRIC ANALYSIS;

NONPLASTIC SLITS;

GEOTECHNICAL ENGINEERING;

SAND; SILT; STRESS-STRAIN RELATIONSHIP; TRIAXIAL TEST; UNCONSOLIDATED MEDIUM;

EID: 0037237974     PISSN: 10900241     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)1090-0241(2003)129:1(1)     Document Type: Article

References (60)

1. Alshibli, K. A., and Sture, S. (2000). "Shear band formation in plane strain experiments of sand." J. Geotech. Geoenviron. Eng., 126(6), 495-503.
2. Alshibli, K. A., Batiste, S. N., Swanson, R. A., Sture, S., Costes, N. C., and Lankton, M. R. (2000). "Quantifying void ratio variation in sand using computed tomography." Geotechnical measurements lab and field, W. A. Marr, ed., Proc., Geo-Denver 2000, Denver, 30-43.
3. Amini, F., and Qi, G. Z. (2000). "Liquefaction testing of stratified silty sands." J. Geotech. Geoenviron. Eng., 126(3), 208-217.
4. Arthur, J. R. F., and Menzies, B. K. (1972). "Inherent anisotropy in a sand." Geotechnique, 22(1), 115-128.
5. Arthur, J. R. F., Chua, K. S., and Dunstan, T. (1977a). "Induced anisotropy in a sand." Geotechnique, 27(1), 13-30.
6. Arthur, J. R. F., Dunstan, T., Al-Ani, Q. A. J. L., and Assadi, A. (1977b). "Plastic deformation and failure in granular media." Geotechnique, 27(1). 53-74.
7. Bell, J. M. (1968). "Correspondence on 'A new soil testing apparatus'." Geotechnique, 18(2), 267-271.
8. Chaney, R. C., and Pamukcu, S. (1991). "Earthquake effects on soil-foundation systems. Part II. Prior to 1975." Foundation engineering handbook. 2nd Ed., H.-Y. Fang, ed., Van Nostrand Reinhold, New York, 623-672.
9. Chu, J., Lo, S. C. R., and Lee, I. K. (1996). "Strain softening and shear band formation of sand in multi-axial testing." Geotechnique, 46(1), 63-82.
10. Desrues, J., Lanier, J., and Stutz, P. (1985). "Localization of the deformation in tests on sand sample." Eng. Fract. Mech., 21(4), 909-921.
11. Desrues, J., Chambon, R., Mokni, M., and Mazerolle, F. (1996). "Void ratio evolution inside shear bands in triaxial sand specimens studied by computed tomography." Geotechnique, 46(3), 529-546.
12. Finno, R. J., Harris, W. W, Mooney, M. A., and Viggiani, G. (1997). "Shear bands in plane strain compression of loose sand." Geotechnique, 47(1), 149-165.
13. Green, G. E., (1971). "Strength and deformation of sand measured in an independent stress control cell." Proc., Roscoe Memorial Symp., Cambridge Univ., Cambridge, U.K., 285-323.
14. Hambly, E. C. (1969). "Technical note to 'A new true triaxial apparatus'." Geotechnique, 19(2), 307-309.
15. Ishihara, K. (1993). "Liquefaction and flow failure during earthquakes." Geotechnique, 43(3), 351-415.
16. Ishihara, K., Troncoso, J., Kawase, Y., and Takahashi, Y. (1980). "Cyclic strength characteristics of tailings materials." Soils Found., 20(4), 127-142.
17. Jakobson, B. (1957). "Some fundamental properties of sand." Proc., 4th Int. Conf. on Soil Mechanics and Foundation Engineering, 1, 167-171.
18. Jang, D.-J., and Frost, J. D., (1998). "Sand structure differences resulting from specimen preparation procedures." ASCE Specialty Conf. on Geotechnical Earthquake Engineering and Soil Dynamics, ASCE, Reston, Va., 1, 234-245.
19. Kjellman, W. (1936). "Report on an apparatus for consummate investigation of the mechanical properties of soils." Proc., 1st Int. Conf. on Soil Mechanics and Foundation Engineering, 2, 16-20.
20. Ko, H.-Y., and Scott, R. F. (1967a). "A new soil testing apparatus." Geotechnique, 17(1), 40-57.
21. Ko, H-Y., and Scott, R. F. (1967b). "Deformation of sand in shear." J. Soil Mech. Found. Div., 93(5), 283-310.
22. Kuerbis, R., Negussey, D., and Vaid, Y. P. (1988). "Effect of gradation and fines content on the undrained response of sand." Hydraud. Fill Struct. Div., Am. Soc. Civ. Eng., D. J. A. Van Zyl and S. G. Vick, eds., 21, 330-345.
23. Ladd, R. S. (1974). "Specimen preparation and liquefaction of sands." J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 100(10), 1180-1184.
24. Lade, P. V. (1977). "Elasto-plastic stress-strain theory for cohesionless soil with curved yield surfaces." Int. J. Solids Struct., 13, 1019-1035.
25. Lade, P. V. (1978). "Cubical triaxial apparatus for soil testing." Geotech. Test. J., 1(2), 93-101.
26. Lade, P. V. (1982). "Localization effects in triaxial tests on sand." Deformation and Failure of Granular Materials, Int. Union of Theoretical and Applied Mechanics, Symp. on Deformation and Failure of Granular Materials, 461-471.
27. Lade, P. V. (1984). "Chapter 20: Failure criterion for frictional materials." Mechanics of engineering materials, C. S. Desai and R. H. Gallagher, eds., Wiley, London, 385-402.
28. Lade, P. V., and Duncan, J. M. (1973). "Cubical triaxial tests on cohesionless soil." J. Soil Mech. Found. Div., 99(10), 793-812.
29. Lade, P. V., and Musante, H. M. (1978). "Three dimensional behavior of remolded clay." J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 104(2), 193-209.
30. Lade, P. V., and Yamamuro, J. A. (1997). "Effects of nonplastic fines on static liquefication of sands." Can. Geotech. J., 34, 918-928.
31. Lam, W-K., and Tatsuoka, F. (1988). "Effects of initial anisotropic fabric and sigma 2 on strength and deformation characteristics of sand." Soils Found., 28(1), 89-106.
32. Lee, K. L. (1965). "Triaxial compressive strength of saturated sand under seismic loading conditions." PhD thesis, Univ. of California, Berkeley, Calif.
33. Lee, K. L., and Seed, H. B. (1967). "Drained strength characteristics of sands." J. Soil Mech. Found. Div., 93(9), 117-141.
34. Matsuoka, H., and Isizaki, H. (1978). "Deformation and strength of anisotropic soil." Proc., 10th Int. Conf. on Soil Mechanics and Foundation Engineering, 1, 699-702.
35. Mylhaus, H. B., and Vardoulakis, I. (1987). "Thickness of shear bands in granular materials." Geotechnique, 37(3), 271-283.
36. Nakai, T., and Matsuoka, H. (1983). "Shear behavior of sand and clay under three-dimensional stress conditions." Soils Found., 23(2), 26-42.
37. Ochiai, H., and Lade, P. V. (1983). "Three-dimensional behavior of sand with anisotropic fabric." J. Geotech. Eng., 109(10), 1313-1327.
38. Oda, M., and Kazama, H. (1998). "Microstructure of shear bands and its relation to the mechanisms of dilatancy and failure of dense granular soils." Geotechnique, 48(4), 465-481.
39. Pittman, T. D., Robertson, P. K., and Sego, D. C. (1994). "Influence of fines on the collapse of loose sands." Can. Geotech. J., 31, 728-739.
40. Reades, D. W., and Green, G. E. (1976). "Independent stress control and triaxial extension tests on sand." Geotechnique, 26(4), 551-576.
41. Seed, H. B., Chaney, R. C., and Pamukcu, S. (1991). "Earthquake effects on soil-foundation systems. Part I. Prior to 1975," Foundation engineering handbook, 2nd Ed., H.-Y. Fang, ed., Van Nostrand Reinhold. New York, 594-623.
42. Shapiro, S. (2000). "The effects of nonplastic fines on the three-dimensional behavior of sand." MSc. thesis, Rep. No. 99-17. Clarkson Univ., Potsdam, N.Y.
43. Sladen, J. A., D'Hollander, R. D., and Krahn, J. (1985). "The liquefaction of sands, a collapse surface approach." Can. Geotech. J., 22, 564-578.
44. Sutherland, H. B., and Mesdary, M. S. (1969). "The influence of the intermediate principal stress on the strength of sand." Proc., 7th Int. Conf. on Soil Mechanics and Foundation Engineering, 1, 391-399.
45. Tatsuoka, F, Nakamura, S., Huang, C.-C., and Tani, K. (1990). "Strength anisotropy and shear band direction in plane strain tests of sand." Soils Found., 30(1), 35-54.
46. Terzaghi, K. (1956). "Varieties of submarine slope failures." Proc., 8th Texas Conf. on Soil Mechanics and Foundation Engineering. Univ. of Texas, Austin. Tex.
47. Thevanayagam, S. (1998). "Effect of fines and confining stress on undrained shear strength of silty sands." J. Geotech. Geoenviron. Eng., 124(6), 479-491.
48. Troncoso, J. H., and Verdugo, R. (1985). "Silt content and dynamic behavior of tailing sands." Proc. 11th Int. Conf. on Soil Mechanics and Foundation Engineering, San Francisco, 1311-1314.
49. Vaid, Y. P., and Thomas, J. (1995). "Liquefaction and postliquefaction behavior." J. Geotech. Eng., 121(2). 163-173.
50. Vardoulakis, I. (1980). "Shear band inclination and shear modulus of sand in biaxial tests." Int. J. Numer. Analyst. Meth. Geomech., 4(2), 103-119.
51. Verdugo, R., and Ishihara, K. (1996). "The steady state of sandy soils." Soils Found., 36(2), 81-91.
52. Vermeer, P. A. (1990). "Orientation of shear bands in biaxial tests." Geotechnique, 40(2), 223-236.
53. Wang, Q., and Lade, P. V. (2001). "Shear banding in true triaxial tests and its effect on failure in sand." J. Eng. Mech., 127(8), 754-761.
54. Wood, F. M. (1999). "Influence of specimen reconstitution method on the undrained response and microstructure of silty sand." MSc thesis, Rep. No. 99-11, Clarkson Univ., Potsdam. N.Y.
55. Yamada, Y., and Ishihara, K. (1979). "Anisotropic deformation characteristics of sand under three dimensional stress conditions." Soils Found., 19(2), 79-91.
56. Yamamuro, J. A., and Covert, K. M. (2001). "Monotonic and cyclic liquefaction of very loose sands with high silt content." J. Geotech. Geoenviron. Eng., 127(4), 314-324.
57. Yamamuro, J. A., and Lade, P. V. (1997). "Static liquefaction of very loose sands." Can. Geotech. J., 34, 905-917.
58. Yamamuro, J. A., and Lade, P. V. (1998). "Steady state concepts and static liquefaction of silty sands." J. Geotech. Geoenviron. Eng., 124(9), 868-877.
59. Yamamuro, J. A., and Lade, P. V. (1999). "Experiments and modeling of silty sands susceptible to static liquefaction." Mech. Cohesive-Frict. Mater., 4, 545-564.
60. Yoshida, T., et al. (1993). "Shear banding in sands observed in plane strain compression." Proc., 3rd Int. Workshop on Localisation and Bifurcation Theory for Soils and Rocks, Grenoble,