Finite element analysis of heat generation from different light-polymerization sources during cementation of all-ceramic crowns

Journal of Prosthetic Dentistry

Volumn 97, Issue 6, 2007, Pages 366-374

  Tunc, Elif Pak ^a  

^a ISTANBUL UNIVERSITY   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

ARTICLE; CEMENTATION; DENTAL CARE; DENTAL EQUIPMENT; DENTAL SURGERY; DIFFERENTIAL SCANNING CALORIMETRY; FINITE ELEMENT ANALYSIS; HEAT; INSTRUMENTATION; LIGHT; METHODOLOGY; TOOTH CROWN;

CEMENTATION; CROWNS; DENTAL INSTRUMENTS; DENTAL MODELS; DENTAL RESTORATION, PERMANENT; DIFFERENTIAL THERMAL ANALYSIS; FINITE ELEMENT ANALYSIS; HEAT; LIGHT;

EID: 34347349010     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-3913(07)60025-0     Document Type: Article

References (43)

1. Pires J., Cvitko E., Denehy G., and Swift Jr. E. Effects of curing tip distance on the light intensity and composite resin microhard-ness. Quintessence Int 24 (1993) 517-521
2. Oberlander H., Friedl K., Schmalz G., Hiller K., and Kopp A. Clinical performance of polyacid-modified resin restoration using "softstart polymerization". Clin Oral Inves-tig 3 (1999) 55-61
3. Peutzfeldt A. Dual-cure resin cements: in vitro wear and effect of quantity of remaining double bonds, filler volume, and light curing. Acta Odontol Scand 53 (1995) 29-34
4. Caughman W., Chan D., and Reuggeberg F. Curing potential of dual-polymerizable resin cements in simulated clinical situations. J Prosthet Dent 86 (2001) 101-106
5. El-Mowafy O., and Rubo M. Influence of composite inlay/onlay thickness on hardening of dual-cured resin cements. J Can Dent Assoc 66 (2000) 147
6. Kleverlaan C., and de Gee A. Curing efficiency and heat generation of various resin composites cured with high-intensity halogen lights. Eur J Oral Sci 112 (2004) 84-88
7. Hannig M., and Bott B. In-vitro pulp chamber temperature rise during composite resin polymerization with various light-curing sources. Dent Mater 15 (1999) 275-281
8. Nomoto R., McCabe J., and Hirano S. Comparison of halogen, plasma and LED curing units. Oper Dent 29 (2004) 287-294
9. McCabe J. Cure performance of light-activated composites by differential thermal analysis (DTA). Dent Mater 1 (1985) 231-234
10. Lloyd C., Joshi A., and McGlynn E. Temperature rises produced by light sources and composites during curing. Dent Mater 2 (1986) 170-174
11. Masutani S., Setcos J., Schnell R., and Phillips R. Temperature rise during polymerization of visible light activated resins. Dent Mater 4 (1988) 174-178
12. Smail S., Patterson C., McLundie A., and Strang R. In-vitro temperature rises during visible light-curing of a lining material and a posterior composite. J Oral Rehabil 15 (1988) 361-366
13. Uhl A., Mills R., and Jandt K. Polymerization and light-induced heat of dental composites cured with LED and halogen technology. Biomaterials 24 (2003) 1809-1820
14. Zach L., and Cohen G. Pulp response to externally applied heat. Oral Surg Oral Med Oral Pathol 19 (1965) 515-530
15. Knezevic A., Tarle Z., Meniga A., Sutalo J., and Pichler G. Influence of light intensity from different curing units upon composite temperature rise. J Oral Rehabil 32 (2005) 362-367
16. Lloyd C., and Brown E. The heats of reaction and temperature rises associated with the setting of bonding resins. J Oral Rehabil 11 (1984) 319-324
17. Lloyd C. A differential thermal analysis (DTA) for the heats of reaction and temperature rises produced during the setting of tooth coloured restorative materials. J Oral Rehabil 11 (1984) 111-121
18. Pohto M., and Scheinin A. Microscopic observations on living dental pulp. Acta Odontol Scand 16 (1958) 303-314
19. Eriksson A., and Albrektsson T. Temperature threshold levels for heat-induced bone tissue injury: a vital-microscopic study in the rabbit. J Prosthet Dent 50 (1983) 101-107
20. Laurell K., Carpenter W., Daugherty D., and Beck M. Histopathologic effects of kinetic cavity preparation for the removal of enamel and dentin. An in vivo animal study. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 80 (1995) 214-225
21. Martin F. A survey of the efficiacy of visible light curing units. J Dent 26 (1998) 239-243
22. Hofmann N., Hugo B., and Klaiber B. Effect of irradiation type (LED or QHT) on photo-activated composite shrinkage strain kinetics, temperature rise, and hardness. Eur J Oral Sci 110 (2002) 471-479
23. Munksgaard E., Peutzfeldt A., and Asmussen E. Elution of TEGDMA and BisGMA from a resin and resin composite cured with halogen or plasma light. Eur J Oral Sci 108 (2000) 341-345
24. Micali B., and Basting R. Effectiveness of composite resin polymerization using light-emitting diodes (LEDs) or halogen-based light-curing units. Pesqui Odontol Bras 18 (2004) 266-270
25. Jandt K., Mills R., Blackwell G., and Ash-worth S. Depth of cure and compressive strength of dental composites cured with blue light emitting diodes (LEDs). Dent Mater 16 (2000) 41-47
26. Santos Jr. G., El-Mowafy O., Rubo J., and Santos M. Hardening of dual-cure resin cements and a resin composite restorative cured with QTH and LED curing units. J Can Dent Assoc 70 (2004) 323-328
27. Stahl F., Ashworth S., Jandt K., and Mills R. Light-emitting diode (LED) polymerization of dental composites: flexural properties and polymerization potential. Biomaterials 21 (2000) 1379-1385
28. Leonard D., Charlton D., Roberts H., and Cohen M. Polymerization efficiency of LED curing lights. J Esthet Restor Dent 14 (2002) 286-295
29. Small B. A review of devices used for photocuring resin-based composites. Gen Dent 49 (2001) 457-460
30. Peutzfeldt A., Sahafi A., and Asmussen E. Characterization of resin composites polymerized with plasma arc curing units. Dent Mater 16 (2000) 330-336
31. Usumez A., and Ozturk N. Temperature increase during resin cement polymerization under a Volume 97 Issue 6 ceramic restoration: effect of type of curing unit. Int J Prosthodont 17 (2004) 200-204
32. Toparli M., Aykul H., and Sasaki S. Temperature and thermal stress analysis of a crowned maxillary second premolar tooth using three-dimensional finite element method. J Oral Rehabil 30 (2003) 99-105
33. de Vree J., Spierings T., and Plasschaert A. A simulation model for transient thermal analysis of restored teeth. J Dent Res 62 (1983) 756-759
34. Spierings T., Peters M., Bosman F., and Plass-chaert A. Verification of theoretical modeling of heat transmission in teeth by in vivo experiments. J Dent Res 66 (1987) 1336-1339
35. Romeed S., Fok S., and Wilson N. A comparison of 2D and 3D finite element analysis of a restored tooth. J Oral Rehabil 33 (2006) 209-215
36. Ash J., and Wheeler R. Wheeler's atlas of tooth form. 5th ed. (1984), Elsevier, St. Louis 25-74
37. Smith B. Planning and making crowns and bridges. 3rd ed. (1998), Thieme Medical Publishers, Inc, New York 3-100
38. Rosenstiel S., Fujimoto J., and Land M. Contemporary fixed prosthodontics. 4th ed. (2006), Mosby, St. Louis 323-335
39. Anusavice K. In: Phillips R. (Ed). Phillips' science of dental materials. 11th ed. (2003), Elsevier, St. Louis 655-720 443-495.
40. Toparli M., and Sasaki S. Finite element analysis of temperature and thermal stress in a postrestored tooth. J Oral Rehabil 30 (2003) 921-926
41. Yang H., Lang L., Guckes A., and Felton D. The effect of thermal change on various dowel-and-core restorative materials. J Prosthet Dent 86 (2001) 74-80
42. Spierings T., de Vree J., Peters M., and Plasschaert A. The influence of restorative dental materials on heat transmission in human teeth. J Dent Res 63 (1984) 1096-1100
43. Lienhard IV J., and Lienhard J. A heat transfer textbook. 3rd ed. (2003), Phlogiston Press, Cambridge 3-48