An experimental investigation of dimple effect on the stribeck curve of journal bearings

Tribology Letters

Volumn 27, Issue 2, 2007, Pages 169-176

  Lu, Xiaobin ^a   Khonsari, M M ^a  

^a LOUISIANA STATE UNIVERSITY   (United States)

Author keywords

Dimple; Journal bearings; Stribeck curve

Indexed keywords

LIGHT OILS; STRIBECK CURVE;

BUSHINGS; ETCHING; FRICTION; LUBRICATION;

JOURNAL BEARINGS;

BUSHINGS; ETCHING; FRICTION; JOURNAL BEARINGS; LUBRICATION;

EID: 34347269648     PISSN: 10238883     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11249-007-9217-x     Document Type: Article

References (40)

1. Fogg, A.: Fluid film lubrication of parallel thrust surfaces. Proc. Inst. Mech. Eng. 155, 49-69 (1946)
2. Shaw, M.C., Mass, C.: An analysis of the parallel-surface thrust bearing. Trans. ASME, 69, 381-387 (1947)
3. Denny, D.F.: Some measurements of fluid pressures between plan parallel thrust surfaces with special reference to radial face seals. Wear 4, 64-83 (1961)
4. Zienkiewicz, O.C.: Temperature distribution within lubricating films between parallel bearing surfaces and its effect on the pressures developed. In: Proceedings of the Conference on Lubrication and Wear, pp. 135-141 London, October 1-3 (1957)
5. Davies, M.G.: The generation of lift by surface roughness in a radial face seal. In: Proceedings of the 3rd International Conference on Fluid Sealing, pp. 1-15. British Hydromechanics Research Association, Harlow, Essex, UK (1961)
6. Salama, M.E.: The effect of macro-roughness on the performance of parallel thrust bearings, Proc. Inst. Mech. Eng. 161, 149-161 (1950)
7. Pape, J.G.: Fundamental research on a radial face seal ASLE Trans. 11(4), 302-309 (1968)
8. Hamilton, D.B., Walowit, J.A., Allen, C.M.: A theory of lubrication by micro-irregularities. J. Basic Eng. 88(1), 177-185 (1966)
9. Anno, J.N., Walowit, J.A., Allen, C.M.: Microasperity Lubrication, J. Lubrication Technol., Trans. ASME, Series F 9(2), 351-355 (1968)
10. Anno, J.N., Walowit, J.A., Allen, C.M.: Load support and leakage from microasperity-lubricated face seals, J. Lubrication Technol., Trans. ASME, Series F 10, 726-731 (1969)
11. Etsion, I.: The effect of combined coning and waviness on the separating force in mechanical face seals. J. Mech. Eng. Sci. 22(2), 59-64 (1980)
12. Tanner, R.I.: Non-Newtonian flow and the oil seal problem. J. Mech. Eng. Sci. 2(1), 25-28 (1960)
13. Etsion, I.: A new concept of zero-leakage noncontacting mechanical face seal, J. Tribol, 106, 338-343 (1984)
14. Lipschitz, A.: A zero-leakage film riding face seal. J. Tribol. 107(3), 326-332 (1985)
15. Lai, T.: Development of non-contacting, non-leaking spiral groove liquid face seals. Lubrication Eng. 50(8), 625-631 (1994)
16. Etsion, I., Halperin, G., Greenberg, Y.: Increasing mechanical seals life with laser-textured seal faces. In: Papers Presented at the 15th International Conference on Fluid Sealing, pp. 3-11. Maastricht, The Netherland (1997)
17. Etsion, I.: Improving tribological performance of mechanical seals by laser surface texturing. In: Proceedings of the 17th International Pump Users Symposium, pp. 17-21. Mainz, Germany (2000)
18. Kligerman, Y., Etsion, I.: Analysis of the hydrodynamic effects in a surface textured circumferential gas seal. Tribol. Trans. 44(3), 472-478 (2001)
19. Etsion, I., Halperin, G.: A laser surface textured hydrostatic mechanical seal. Tribol, Trans., 45(3), 430-434 (2002)
20. Tanaka, H., Gomi, K., Miyake, Y.: Micro-tribology of carbon-coated thin film media with well-defined surface texture. IEEE Trans. Magn. 29(1), 270-275 (1993)
21. Tagawa, N., Bogy, D.B.: Air film dynamics for micro-textured flying head slider bearings in magnetic hard disk drives. J. Tribol. 124(3), 568-574 (2002)
22. Tagawa, N., Mori, A.: Thin film gas lubrication characteristics of flying head slider bearings over patterned media in hard disk drives. Microsyst. Technol. 9(5), 362-368 (2003)
23. Wang, X.L., Kato, K., Adachi, K., Aizawa, K.: Thin film gas lubrication characteristics of flying head slider bearings over patterned media in hard disk drives. Tribol. Int. 34(10), 703-711 (2001)
24. Wang, X.L., Kato, K., Adachi, K., Aizawa, K.: Thin film gas lubrication characteristics of flying head slider bearings over patterned media in hard disk drives. Tribol. Int. 36(3), 189-197 (2003)
25. Wakuda, M., Yamauchi, Y., Kanzaki, S., Yasuda, Y.: Thin film gas lubrication characteristics of flying head slider bearings over patterned media in hard disk drives. Wear, 254(3-4), 356-363 (2003)
26. Brizmer, V., Etsion, I.: A laser surface textured parallel thrust bearing. Tribol. Trans. 46(3), 387-403 (2003)
27. Ronen, A., Etsion, I., Kligerman, Y.: Friction-reducing surface-texturing in reciprocating automotive components. Tribol. Trans. 44(3), 359-366 (2001)
28. Ryk, G., Kligerman, Y., Etsion, I.: Experimental investigation of laser surface texturing for reciprocating automotive components. Tribol. Trans. 45(4), 444-449 (2002)
29. Kligerman, Y., Etsion, I., Shinkarenko, A.: Improving tribological performance of piston rings by partial surface texturing. J. Tribol. 127(3), 632-638 (2005)
30. Etsion, I., Burstein, L.: Improving tribological performance of piston rings by partial surface texturing. Tribol. Trans. 39(3), 677-683 (1996)
31. Etsion, I., Kligerraan, Y., Halperin, G.: Analytical and experimental investigation of laser-textured mechanical seal faces. Tribol. Trans., 42(3), 511-516 (1999)
32. Wang, Q.J., Zhu, D.: Virtual texturing: modeling the performance of lubricated contacts of engineered surfaces. J. Tribol. 127(4), 722-728 (2005)
33. Geiger, M., Roth, S., Becker, W.: Influence of laser-produced microstructures on the tribological behavior of ceramics. Surf. Coating Technol. 100-101, 17-22 (1998)
34. Etsion, I.; State of the art in laser surface texturing. J. Tribol. 127(1), 248-253 (2005)
35. Lu, X.B., Khonsari, M.M.: On the lift-off speed in journal bearings. Tribol. Lett. 20(3-4), 299-305 (2005)
36. Khonsari, M.M., Booser, E.R.: Applied Tribology Bearing-Design and Lubrication, John Wiley & Sons, Inc, New York, NY, (2001)
37. Lo, S.-W., Wilson, W.R.D.: A theoretical model of micro-pool lubrication in metal forming. J. Tribol. 121(4), 731-738 (1999)
38. Lo, S.-W., Tzu-Chern, H.: Lubricant permeation from micro oil pits under intimate contact condition. J. Tribol. 121(4), 633-638 (1999)
39. Hirn, G.: Sur les principaux phénomènes qui presentment les frottements médiats. Bull, Ind, Soc. Mulhouse, 26, 188-277 (1854)
40. Dowson, D., Taylor, C.M.: Cavitation in bearings. Ann. Rev. Fluid Mech., 11, 35-66 (1979)