Simulation and analysis of high-speed droplet spray fynamics

Journal of Fluids Engineering, Transactions of the ASME

Volumn 129, Issue 5, 2007, Pages 621-633

  Shi, H ^a   Kleinstreuer, C ^a  

^a North Carolina State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DROPLET CHARACTERISTICS; GAS PHASES; ISOTHERMAL SPRAYS; PRESSURE JET ATOMIZERS;

COMPUTER SIMULATION; ISOTHERMS; PRESSURE EFFECTS; SIZE DETERMINATION; TRAJECTORIES; TRANSIENT ANALYSIS;

DROP BREAKUP;

EID: 34250889256     PISSN: 00982202     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2717621     Document Type: Article

References (38)

1. Sirignano, W. A., 1999, Fluid Dynamics and Transport of Droplets and Sprays, Cambridge University Press, Cambridge, UK.
2. Archambault, A., Edwards, C. F., and MacCormack, R. W., 2003, "Computation of Spray Dynamics by Moment Transport Equations I: Theory and Development," Atomization Sprays, 13, pp. 63-87.
3. Faeth, G. M., Hsiang, L. P., and Wu, P. K., 1995, "Structure and Breakup Properties of Sprays," Int. J. Multiphase Flow, 21(Suppl), pp. 99-127.
4. Wu, P. K., Miranda, R. F., and Faeth, G. M., 1995, "Effects of Initial Flow Conditions on Primary Breakup of Nonturbulent and Turbulent Round Liquid Jets," Atomization Sprays, 5, pp. 175-196.
5. Mazallon, J., Dai, Z., and Faeth, G. M., 1999, "Primary Breakup of Nonturbulent Round Liquid Jets in Gas Crossflows," Atomization Sprays, 9, pp. 291-311.
6. Herrmann, M., 2003, "Modeling Primary Breakup: A Three-Dimensional Eulerian Level Set/Vortex Sheet Method for Two-Phase Interface Dynamics," Center for Turbulence Research, Annual Research Briefs, pp. 185-196.
7. Yi, Y., and Reitz, R. D., 2005, "Modeling the Primary Breakup of High-Speed Jets," Atomization Sprays, 14, pp. 53-79.
8. Liu, B. Mather, D., and Reitz, R. D., 1993, "Effects of Drop Drag and Breakup on Fuel Sprays," SAE Technical Paper No. 930072.
9. Reitz, R. D., and Diwakar, R., 1986, "Effect of Droplet Breakup on Fuel Sprays," SAE Technical Paper No. 860469.
10. Dukowicz, J. K., 1980, "A Particle-Fluid Numerical Model for Liquid Sprays," J. Comput. Phys., 35, pp. 229-253.
11. Burger, M., Klose, G., Rottenkolber, G., Schmehl, R., Giebert, D., Schafer, O., Koch, R., and Wittig, S., 2002, "A Combined Eulerian and Lagrangian Method for Prediction of Evaporating Sprays," ASME J. Eng. Gas Turbines Power, 124, pp. 481-488.
12. Iyer, V., and Abraham, J., 2003, "An Evaluation of a Two-Fluid Eulerian-Liquid Eulerian-Gas Model for Diesel Sprays," ASME J. Fluids Eng., 125, pp. 660-669.
13. Reitz, R. D., and Diwakar, R., 1987, "Structure of High-Pressure Fuel Sprays," SAE Technical Paper No. 870598.
14. Reitz, R. D., 1987, "Modeling Atomization Processes in High-Pressure Vaporizing Sprays," Atomization and Spray Technology, 3, pp. 309-337.
15. O'Rourke, P. J., and Amsden, A. A., 1987, "The Tab Method for Numerical Calculation of Spray Droplet Breakup," SAE Technical Paper Series No. 872089.
16. Tanner, F. X., 1997, "Liquid Jet Atomization and Droplet Breakup Modeling of Nonevaporating Diesel Fuel Sprays," SAE Technical Paper Series No. 970050.
17. Shang, H. M., Kim, Y. M., Chen, C. P., and Wang, T. S., 1994, "Numerical Studies of Droplet-Turbulence Interactions," Appl. Math. Comput., 65, pp. 63-78.
18. Madabhushi, R. K., 2003, "A Model for Numerical Simulation of Breakup of Liquid Jet in Crossflow," Atomization Sprays, 13, pp. 413-424.
19. Beale, J. C., and Reitz, R. D., 1999, "Modeling Spray Atomization With the Kelvin-Helmholtz/Rayleigh-Taylor Hybrid Model," Atomization Sprays, 9, pp. 623-650.
20. Su, T. F., Patterson, M. A., Reitz, R. D., and Farrell, P. V., 1996, "Experimental and Numerical Studies of High Pressure Multiple-Injection Sprays," SAE Technical Paper Series No. 960861.
21. Lee, C, S., and Park, S. W., 2002, "An Experimental and Numerical Study on Fuel Atomization Characteristics of High-Pressure Diesel Injection Sprays," Fuel, 81(18), pp. 2417-2423.
22. Park, S. W., and Lee., C. S., 2004, "Investigation of Atomization and Evaporation Characteristics of High-Pressure Injection Diesel Spray Using Kelvin-Helmholz Instability/Droplet Deformation and Break-Up Competition Model," Proc. Inst. Mech. Eng., Part D (J. Automob. Eng.), 218, pp. 767-777.
23. Ibrahim, E. A., Yang, H. Q., and Przekwas, A. J., 1993, "Modeling of Spray Droplets Deformation and Breakup," J. Propul. Power, 9, pp. 651-654.
24. Gorokhovski, M. A., 2001, "The Stochastic Lagrangian Model of Drops Breakup in the Computation of Liquid Sprays," Atomization Sprays, 11, pp. 505-520.
25. Gorokhovski, M. A., and Saveliev, V. L., 2003, "Analyses of Kolmogorov's Model of Breakup and its Application into Lagrangian Computation of Liquid Sprays Under Air-Blast Atomization," Phys. Fluids, 15, pp. 184-192.
26. Apte, S. V., Gorokhovski, M., and Moin, P., 2003, "LES of Atomizing Spray With Stochastic Modeling of Secondary Breakup," Int. J. Multiphase Flow, 29, pp. 1503-1522.
27. Kolmogorov, A. N., 1941, "On the Log-Normal Distribution of Particles Sizes During Breakup Process," Dokl. Akad. Nauk SSSR, 2, pp. 99-101.
28. Kleinstreuer, C., 2003, Two-Phase Flow: Theory and Applications, Tayler & Francis, NY.
29. Clift, R., Grace, J. R., and Weber, M. E., 1978, Bubble, Drops and Particles, Academic Press, NY.
30. Gosman, A. D., and Ioannides, E., 1983, "Aspects of Computer Simulation of Liquid-Fueled Combustors," J. Energy, 7, pp. 482-490.
31. Ansys Inc., 2004, CFX 10 Solver Theory. 168-169 Ansys Inc., Canonsburg, PA.
32. Hiroyasu, H., and Kadota, T., 1974, "Fuel Droplet Size Distribution in Diesel Combustion Chamber," SAE Paper No. 740715.
33. Wu, K. J., Santavicca, D. A., and Bracco, F. V., 1984, "LDV Measurements of Drop Velocity in Diesel-Type Sprays," AIAA J., 22(9), pp. 1263-1270.
34. Wu, K. J., Reitz, R. D., and Bracco, F. V., 1986, "Measurements of Droplet Size at the Spray Edge Near the Nozzle in Atomizing Liquid Jets," Phys. Fluids, 29, pp. 941-951.
35. Labs, J., and Parker, T, 2003, "Diesel Fuel Spray Droplet Sizes and Volume Fractions From the Region 25 mm Below the Orifice," Atomization Sprays. 13, pp. 425-442.
36. Kosaka, H., Suzuki, T., and Kamimoto, T., 1995, "Numerical Simulation of Turbulent Dispersion of Fuel Droplets in an Unsteady Spray Via Discrete Vortex Method," SAE Technical Paper No. 952433.
37. Hsiang, L. P., and Faeth, G. M., 1993, "Drop Properties After Secondary Breakup," Int. J. Multiphase Flow, 19, pp. 721-735.
38. Cheng, Y. S., Holmes, T. D., Gao, J., Guilmette, R. A., Li, S., Surakitbanharn, Y., and Rowlings, C., 2001, "Characterization of Nasal Spray Pumps and Deposition Pattern in a Replica of the Human Nasal Airway," Journal of Aerosol Medicine: Deposition, Clearance, and Effects in the Lung, 14(2), pp. 267-280.