Metrological validation for 3D modeling of dental plaster casts

Medical Engineering and Physics

Volumn 29, Issue 9, 2007, Pages 954-966

  Brusco, Nicola ^a   Andreetto, Marco ^a   Lucchese, Luca ^b   Carmignato, Simone ^a   Cortelazzo, Guido M ^a  

^a UNIVERSITY OF PADOVA   (Italy)

^b Oregon State University   (United States)

Author keywords

Automatic 3D modeling; Dental casts; Geometrical metrology; Iterative closest point (ICP) algorithm; Spin image; Three dimensional (3D) registration; Wide baseline matching

Indexed keywords

ALGORITHMS; COMPUTATIONAL GEOMETRY; COMPUTER SOFTWARE; ITERATIVE METHODS; MEASUREMENT THEORY; VIRTUAL REALITY;

AUTOMATIC 3D MODELING; DENTAL CASTS; GEOMETRICAL METROLOGY; ITERATIVE CLOSEST POINT (ICP) ALGORITHM; SPIN-IMAGES; WIDE BASELINE MATCHING;

DENTAL MATERIALS;

BIOMEDICAL AND DENTAL MATERIALS;

ARTICLE; COMPUTER PROGRAM; DENTAL PRACTICE; DENTIST; GEOMETRY; INFORMATION STORAGE; MATHEMATICAL MODEL; MEDICAL ASSESSMENT; MEDICAL SPECIALIST; MEDICINE; ORTHODONTICS; PRIORITY JOURNAL; THREE DIMENSIONAL IMAGING; VALIDATION PROCESS;

COMPUTER SIMULATION; COMPUTER-AIDED DESIGN; DENTAL MODELS; HUMANS; IMAGE ENHANCEMENT; IMAGING, THREE-DIMENSIONAL; ORTHOTIC DEVICES; PHANTOMS, IMAGING; USER-COMPUTER INTERFACE;

EID: 34250758222     PISSN: 13504533     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.medengphy.2006.10.011     Document Type: Article

References (42)

1. Andreetto M., Brusco N., and Cortelazzo G.M. Automatic 3D modeling of palatal plaster casts. Fourth international conference on 3D imaging and modeling (3DIM). Banff, Canada (2003) 132-138
2. Brusco N., Andreetto M., Carmignato S., and Cortelazzo G.M. Metrological analysis of a procedure for the automatic 3D modeling of dental plaster casts. Second international symposium on 3D data processing, visualization, and transmission (3DPVT 2004). Thessaloniki, Greece, September (2004) 592-599
3. Clark J. Implementing non-contact digitisation techniques within the mechanical design process. Sens Rev 20 3 (2001) 195-201
4. Carmignato S., Savio E., and De Chiffre L. Accuracy of a 3D vision system for inspection of complex geometry. Proceedings of AMST sixth international conference (2002) 569-576
5. Iso-vim, International vocabulary of basic and general terms in metrology. Geneva: International Organization for Standardization; 1993.
6. ISO/TS 15530-3. GPS-CMMs: technique for determining the uncertainty of measurement-Part 3: use of calibrated workpieces or standards; 2004.
7. ISO 10360 series of standard. Geometrical Product Specifications (GPS)-acceptance tests and reverifications test for coordinate measuring machines (CMM).
8. Trapet E, Savio E, De Chiffre L. New advances in traceability of CMMs for almost the entire range of industrial dimensional metrology needs. Ann CIRP, 53/1/2004, p. 433-438.
9. D-200 Dental 3D Scanner and DentalDesigner by 3Shape, http://www.3shape.com.
10. DiGiscan and DiGident by Fraunhofer IOF, http://www.iof.fraunhofer.de/departments/optical-systems/3d-shape-measurement/index_e.html.
11. Hanson M. Something to smile about: 3D graphics are revolutionizing oral health care. IEEE Comp Graphics Appl 21 July/August (4) (2001) 14-20
12. Goshtasby A.A., Nambala S., deRijk W.G., and Campbell S.D. A system for digital reconstruction of gypsum dental casts. IEEE Trans Med Imaging 16 October (5) (1997) 664-674
13. Hirogaki Y., Sohmura T., Satoh H., Takahashi J., and Takada K. Complete 3-D reconstruction of dental cast shape using perceptual grouping. IEEE Trans Med Imaging 20 October (10) (2001) 1093-1101
14. DeLong R., Heinzen M., Hodges J.S., Ko C.-C., and Douglas W.H. Accuracy of a system for creating 3D computer models of dental arches. J Dental Res 82 6 (2003) 438-442
15. Rushmeier H., and Bernardini F. The 3D model acquisition pipeline. Comput Graphics Forum 21 2 (2002) 149-172
16. Ashbrook A., Fisher R., Robertson C., and Werghi N. Finding surface correspondence for object recognition and registration using pairwise geometric histograms. Proceedings of the European conference on computer vision, vol. 1407 (1998) 674-786
17. Dorai C., Wang G., Jain A., and Mercer C. Registration and integration of multiple object views for 3D model construction. IEEE Trans Pattern Anal Machine Intell 20 November (1) (1998) 83-89
18. Higuchi K., Hebert M., and Ikeuchi K. Building 3D models from unregistered range images. Graph Mod Image Proc 57 4 (1995) 315-333
19. Huber D., and Hebert M. Fully automatic registration of multiple 3D data sets. IEEE workshop on computer vision beyond the visible spectrum (2001) 433-449
20. Zhang D., and Hebert M. Harmonic maps and their applications in surface matching. Proceedings of the IEEE conference on computer vision and pattern recognition (CVPR 99) (1999) 524-530
21. Johnson AE. Spin-images: a representation for 3-D surface matching. Ph.D. thesis. Pittsburgh: Carnegie Mellon University; 1997.
22. Johnson A.E., and Hebert M. Using spin-images for efficient multiple model recognition in cluttered 3-D scenes. IEEE Trans Pattern Anal Machine Intell 21 5 (1999) 433-449
23. Krsek P., Pajdla T., Hlavac V., and Martin R. Range image registration driven by hierarchy of surface differential features. Proceedings of the 22nd workshop of the Austrian Association for Pattern Recognition (1998) 175-183
24. Vanden Wyngaerd J., and Van Gool L. Coarse registration of surface patches with local symmetries. Proceedings of the European conference on computer vision (ECCV'02), vol. 2351 (2002) 572-586
25. Vanden Wyngaerd J., Van Gool L., Koch R., and Proesmans M. Invariant-based registration of surface patches. Proceedings of the international conference on computer vision (ICCV'99) (1999) 301-306
26. Van Gool L., Vandermeulen D., Kalberer G., Tuytelaars T., and Zalesny A. Modeling shapes and textures from images: new frontiers. Proceedings of the first international symposium on 3D data processing visualization and transmission (3DPVT2002). Padova, Italy (2002), IEEE Press 286-294
27. Roth G. Registering two overlapping range images. Proceedings of the second international conference on 3D digital imaging and modeling. Ottawa, Canada (1999) 191-200
28. Horn B.K.P. Computer vision (1987), McGraw-Hill, New York, NY
29. Besl P.J., and McKay N.D. A method for registration of 3D shapes. IEEE Trans Pattern Anal Machine Intell 14 November (2) (1992) 239-259
30. Chen Y., and Medioni G.G. Object modeling by registration of multiple range images. Image Vis Comput 10 3 (1992) 145-155
31. Zhang Z. Iterative point matching for registration of free-form curves and surfaces. Int J Comput Vis 13 2 (1994) 119-152
32. Jost T., and Hügli H. A multi-resolution scheme ICP algorithm for fast shape registration. Proceedings of the first international symposium on 3D data processing visualization and transmission (3DPVT2002). Padova, Italy (2002), IEEE Press 540-543
33. Kapoutsis C., Vavoulidis C., and Pitas I. Morphological iterative closest point algorithm. IEEE Trans Image Process 8 November (11) (1999) 1644-1646
34. Greenspan M., and Godin G. A nearest neighbor method for efficient ICP. Proceedings of the third international conference on 3D digital imaging and modeling. Quebec City, Canada (2001) 161-168
35. Rusinkiewicz S., and Levoy M. Efficient variants of the ICP algorithm. Proceedings of the third international conference on 3D digital imaging and modeling. Quebec City, Canada (2001) 145-152
36. Lucchese L., Doretto G., and Cortelazzo G.M. A frequency domain technique for 3-D view registration. IEEE Trans Pattern Anal Machine Intell 24 November (11) (2002) 1468-1484
37. Bergevin R., Soucy M., Gagnon H., and Laurendeau D. Towards a general multiview registration technique. IEEE Trans Pattern Anal Machine Intell 18 5 (1996) 540-547
38. Wheeler M., Sato Y., and Ikeuchi K. Consensus surfaces for modeling 3D objects from multiple range images. Proceedings of the sixth international conference on computer vision (1998), IEEE 917-924
39. Wilhelm R.G., Hocken R., and Schwenke H. Task specific uncertainty in coordinate measurement. Ann CIRP 50 2 (2001) 553-563
40. Savio E., Hansen H.N., and De Chiffre L. Approaches to the calibration of freeform artefacts on coordinate measuring machines. Ann CIRP 51 1 (2002) 433-436
41. ISO 10360-2. Geometrical product specifications (GPS)-acceptance test and reverification test for CMMs-Part 2: CMMs used for measuring size; 2001.
42. I-DEAS. Imageware Surfacer; 2006.