Foam structure of xerogel prepared via ring-opening reaction between epoxy groups attached on the side chain of polystyrene

Fusion Science and Technology

Volumn 51, Issue 4, 2007, Pages 665-672

  Yamanaka, Kentaro ^a   Nagai, Keiji ^a   Nemoto, Nobukatsu ^b   Nomura, Kaori ^b   Shimoyama, Tomonori ^b   Tanji, Kei ^b   Tanji, Tomoya ^b   Nakai, Mitsuo ^a   Norimatsu, Takayoshi ^a  

^a OSAKA UNIVERSITY   (Japan)

^b NIHON UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

COPOLYMERS; EPOXY RESINS; FOAMS; FREE RADICAL POLYMERIZATION; MONOMERS; POLYSTYRENES; SCANNING ELECTRON MICROSCOPY;

CATIONIC INITIATORS; CHLOROSTYRENES; OXIRANE DERIVATIVE;

XEROGELS;

EID: 34250637068     PISSN: 15361055     EISSN: None     Source Type: Journal    
DOI: 10.13182/FST07-A1461     Document Type: Conference Paper

References (34)

1. T. YAMANAKA, Kansei Kakuyuugou Kenkyuu Keikaku, Institute of Laser Engineering, Osaka University, Japan (1983).
2. M. TABAK, et al., "Ignition and High Gain with Ultra Powerful Lasers," Phys. Plasmas 1, 1626 (1994).
3. R. KODAMA, et al., "Fast Heating of Ultrahigh-Density Plasma as Aster Towards Laser Fusion Ignition," Nature 412, 798 (2001).
4. R. KODAMA, et al., "Fast Heating Scalable to Laser Fusion Ignition," Nature 418, 933 (2002).
5. R. KODAMA, et al., "Fast Heating of Super-Solid Density Plasmas Towards Laser Fusion Ignition," Plasmas Phys. Control. Fusion 44, B109 (2002).
6. Y. KITAGAWA, et al., "Progress of Fast Ignitor Studies and Petawatt Laser Construction at Osaka University," Phys. Plasmas 9, 2202 (2002).
7. K. A. TANAKA, et al., "Basic and Integrated Studies for Fast Ignition," Phys. Plasmas 10, 1925 (2003).
8. Y. KITAGAWA, et al., "Prepulse-Free Petawatt Laser for a Fast Ignitor," IEEE J. Quant. Electr. 40, 281 (2004).
9. R. KODAMA, et al., "Fast Plasma Heating in a Cone-Attached Geometry - Towards Fusion Ignition," Nucl. Fusion 44, S276 (2004).
10. K. NAGAI, T. NORIMATSU, Y. IZAWA, and T. YAMANAKA, "Laser Fusion Target Nanomaterials," Encyclopedia of Nanoscience and Nanotechnology, Vol. 10, p. 407, Ed. E. H. Nalwa, American Scientific Publishers (2004).
11. K. NAGAI, T. NORIMATSU, and Y. IZAWA, "Target Fabrication Technology and New Functional Materials for Laser Fusion and Laser Plasma Experiment," J. Plasma Fusion Soc. 80, 626 (2004).
12. T. NORIMATSU, K. NAGAI, T. TAKEDA, K. MIMA, and T. YAMANAKA, "Update for the Drag Force on an Injected Pellet and Target Fabrication for Inertia! Fusion," Fusion Sci. Technol. 43, 339 (2003).
13. T. Norimatsu, et al., "Fabrication, Injection, and Tracking of Fast Ignition Targets: Status and Future Prospects," Fusion Sci. Technol. 49, 483 (2006).
14. K. Nagai, et al., "Foam Materials for Cryogenic Targets of Fast Ignition Realization Experiment (FIREX)," Nucl. Fusion 45, 1277 (2005).
15. N. MIYANAGA, et al., "10-kJ P W Laser for FIREX-I Program," J. Phys. IX (France) 133, 81 (2006).
16. M. TAKAGI, et al., "Development of Foam Shell with Plastic Ablator for Cryogenic Laser Fusion Target," J. Vac. Sci. Technol. A 11, 2837 (1993).
17. G. E. OVERTURF, et al., "Resorcinol/Formaldehyde Foam Shell Targets for ICF," Fusion Technol. 28, 1803 (1995).
18. S. M. LAMBERT, et al., "Fabrication of Low-Density Foam Shells from Resorcinol-Formaldehyde Aerogel," J. Appl. Polym. Sci. 65, 2111 (1997).
19. A. NIKROO, D. CZECHOWICZ, R. PAGUIO, A. L. GREENWOOD, and M. TAKAGI, "Fabrication and Properties of Overcoated Resorcinol-Formaldehyde Shells for OMEGA Experiments," Fusion Sci. Technol 45, 84 (2004).
20. C. A. FREDERICK, et al., "Controlling the Pore Size and Gelation Timeof Resorcinol Formaldehyde Foam for Fabrication of Direct Drive Targets for ICF Experiments," Fusion Sci. Technol. 49, 657 (2006).
21. F. ITO, K. NAGAI, M. NAKAI, and T. NORIMATSU, "Resorcinol-Formalin Foam Balls Via Gelation of Emulsion Using Phase-Transfer Catalysts," Macromol. Chem. Phys. 206, 2171 (2005).
22. F. ITO, et al., "Low-Density-Plastic-Foam Capsule of Resorcinol/Formalin and (Phloroglucinolcarboxylic Acid)/Formalin Resins for Fast Ignition Realization Experiment (FIREX) in Laser Fusion Research," Jpn. J. Appl Phys Part 2. 45, L335 (2006).
23. F. ITO, K. NAGAI, M. NAKAI, and T. NORIMATSU, "Optimization of Gelation to Prepare Hollow Foam Shell of Resorcinol-Formalin Using a Phase-Transfer Catalyst," Fusion Sci. Technol. 49, 663 (2006).
24. R. M. LUCK and R. K. SADHIR, "Shrinkage in Conventional Monomers During Polymerization," Expanding Monomers, Synthesis, Characterization, and Applications, pp. 1-61, R. M. LUCK and R. K. SADHIR, Ed., CRC Press, Boca Raton (1992).
25. K. KAKIMOTO, N. NEMOTO, F. SANDA, and T. ENDO, "Anionic Ring-Opening Polymerization of Cyclic Thiocarbonates Containing Norbornene and Norbornane Groups Undergoing Volume Expansion on Polymerization," Chem. Lett. 2, 156 (2002).
26. H. KAMESHIMA, N. NEMOTO, F. SANDA, and T. ENDO, "Cationic Ring-Opening Polymerization of Five-Membered Cyclic Thiocarbonate Bearing an Adamantane Moiety Via Selective Ring-Opening Direction," Macromolecules 35, 5769 (2002).
27. N. NEMOTO, F. SANDA, and T. ENDO, "Cationic Ring-Opening Polymerization of Six-Membered Cyclic Carbonates with Ester Groups," J. Polym. Sci. Part A: Polym. Chem. 39, 1305 (2001).
28. N. NEMOTO, F. SANDA, and T. ENDO, "Controlled Cationic Ring-Opening Polymerization of Monothio-carbonate," Macromolecules 33, 7229 (2000).
29. R. TRUXA and M. SUCHOPAREK, "Functionalized Monomers, 1. Synthesis and Characterization of Oxirane and Oxetane Derivatives of Styrene," Makromol. Chem. 191, 1931 (1990).
30. N. NEMOTO et al., "Polystyrene Based Foam Materials for Cryogenic Targets of Fast Ignition Realization Experiment (FIREX)," Fusion Sci. Technol. 49, 695 (2006).
31. T. REN, J. REN, and X. TANG, "Microporous Polyurethane/Acrylate Gel Polymer Electrolyte Obtained by Emulsion Polymerization," Polym. Int. 54, 185 (2005).
32. K. NAGAI, T. NORIMATSU, and Y. IZAWA, "Control of Micro- and Nano-Structure in Ultralow-Density Hydrocarbon Foam," Fusion Sci. Technol. 45, 79 (2004).
33. K. NAGAI, B-R. CHO, Y. HASHISHIN, T. NORIMATSU and T. YAMANAKA, "Microstructures of Ultralow-Density Foam Plastics Obtained by Altering the Coagulant Alcohol," Jpn. J. Appl. Phys. 41, L431 (2002).
34. D.-M. WANG, et al., "Control of the Porosity of Asymmetric TPX Membranes," Membrane Sci. 141, 1 (1998).