Elastohydrodynamic modelling of heat partition in rolling-sliding point contacts

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 221, Issue 3, 2007, Pages 223-235

  Clarke, A ^a   Sharif, K J ^a   Evans, H P ^a   Snidle, R W ^a  

^a CARDIFF UNIVERSITY   (United Kingdom)

Author keywords

Flash temperatures; Heat partition; Limiting shear stress; Non Newtonian; Thermal elastohydrodynamic lubrication; Traction

Indexed keywords

ENERGY DISSIPATION; NON NEWTONIAN FLOW; RHEOLOGY; SHEAR STRESS; THERMOANALYSIS; TRACTION (FRICTION);

FLASH TEMPERATURES; HEAT PARTITION; ROLLING-SLIDING POINT CONTACTS;

ELASTOHYDRODYNAMIC LUBRICATION;

ELASTOHYDRODYNAMIC LUBRICATION; ENERGY DISSIPATION; NON NEWTONIAN FLOW; RHEOLOGY; SHEAR STRESS; THERMOANALYSIS; TRACTION (FRICTION);

EID: 34250619210     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/13506501JET219     Document Type: Conference Paper

References (31)

1. Blok, H. Theoretical study of temperature rise of surfaces of actual contact under oiliness lubricating conditions. In Proceedings of General Discussion on Lubrication, part 2, 1937, pp. 222-235 (Institution of Mechanical Engineers, London).
2. Blok, H. The constancy of scoring temperature. In Interdisciplinary approach to the lubrication of concentrated contacts. NASA Special Publication SP237, 1969 (NASA, New York).
3. Tian, X. and Kennedy, F. E. Maximum and average flash temperatures in sliding contacts. Trans. ASME, J. Tribol., 1994, 116, 167-174.
4. Bos, J. and Moes, H. Frictional heating of tribological contacts. Trans. ASME, J. Tribol., 1995, 117, 171-177.
5. Manton, S.M., O'Donoghue, J. P., and Cameron, A. Temperatures at lubricated rolling/sliding contacts. Proc. Instn Mech. Engrs, 1967, 182, 813-823.
6. Cheng, H. S. A refined solution to the thermal elastohydrodynamic lubrication of rolling and sliding cylinders. Trans. ASLE, 1965, 8, 397-410.
7. Sadeghi, F. and Sui, P. C. Thermal elastohydrodynamic lubrication of rolling/sliding contacts. Trans. ASME, J. Tribol., 1990, 112, 189-195.
8. Sui, P. C. and Sadeghi, F. Non-Newtonian thermal elastohydrodynamic lubrication. Trans. ASME, J. Tribol., 1991, 113, 390-397.
9. Yang, P. and Wen, S. A generalized Reynolds equation for non-Newtonian thermal elastohydrodynamic lubrication. Trans. ASME, J. Tribol., 1990, 112, 631-636.
10. Hsiao, H.-S. H. and Hamrock, B. J. Temperature distribution and thermal degradation of the lubricant in EHL line contact conjunctions. Trans. ASME. J. Tribol., 1994, 116, 794-803.
11. Wolff, R., Nonaka, T., Kubo, A., and Matsuo, K. Thermal elastohydrodynamic lubrication of rolling/sliding line contacts. Trans. ASME, J. Tribol., 1992, 114, 706-713.
12. Sharif, K. J., Kong, S., Evans, H. P., and Snidle, R. W. Contact and elastohydrodynamic analysis of worm gears - Part 1: theoretical formulation. Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 2001, 215, 817-830.
13. Sharif, K. J., Evans, H. P., Snidle, R. W., and Newall, J. P. Modelling of film thickness and traction in a variable ratio traction drive rig. Trans. ASME, J. Tribol., 2004, 126, 92-104.
14. Yang, P., Wang, J., and Kaneta, M. Thermal and non-Newtonian numerical analyses for starved EHL line contacts. Trans. ASME, J. Tribol., 2006, 128, 282-290.
15. Chang, L. Traction in thermal elastohydrodynamic lubrication of rough surfaces. Trans. ASME, J. Tribol., 1992, 114, 186-191.
16. Zhu, D. and Hu, Y.-Z. A computer program package for the prediction of EHL and mixed lubrication characteristics, friction, subsurface stresses and flash temperatures based on measured 3-D surface roughness. Tribol. Trans., 2001, 44, 383-390.
17. Clarke, A., Sharif, K. J., Evans, H. P., and Snidle, R. W. Heat partition in rolling/sliding elastohydrodynamic contacts. Trans. ASME, J. Tribol., 2006, 128, 67-84.
18. Patching, M. J., Kweh, C. C., Evans, H. P., and Snidle, R. W. Conditions for scuffing failure of ground and superfinished steel discs at high sliding speeds using a gas turbine engine oil. Trans. ASME, J. Tribol., 1995, 117, 482-489
19. Holmes, M. J. A., Evans, H. P., Hughes, T. G., and Snidle, R. W. Transient elastohydrodynamic point contact analysis using a new coupled differential deflection method: part 1 theory and validation. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2003, 217, 289-303.
20. Evans, H. P. and Hughes, T. G. Evaluation of deflection in semi-infinite bodies by a differential method. Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 2000, 214, 563-584.
21. Johnson, K. L. Contact mechanics, 1985 (Cambridge University Press, Cambridge).
22. Johnson, K. L. and Tevaarwerk, J. L. Shear behaviour of elastohydrodynamic oil films. Proc. R. Soc. Lond. A, 1977, 356, 215-236
23. Bair, S. and Winer, W. O. A rheological model for elastohydrodynamic contacts based on primary laboratory data. Trans. ASME, J. Lubr. Technol., 1979, 101, 258-265.
24. Bair, S. and Winer, W. O. Shear strength measurements of lubricants at high pressure. Trans. ASME, J. Lubr. Technol., 1979, 101, 251-257.
25. Ståhl, J. and Jacobson, B. O. A lubricant model considering wall-slip in EHL line contacts. Trans. ASME, J. Tribol., 2003, 125, 523-532.
26. Bair, S. The variation of viscosity with temperature and pressure for various real lubricants. Trans. ASME, J. Tribol., 2001, 123, 433-436.
27. Roelands, C. J. A. Correlation aspects of the viscosity-temperature-pressure relationship of lubricating oils. PhD Thesis, Technical University Delft, The Netherlands, 1966 (V.R.B. Gronigen, The Netherlands).
28. Mobil EHL Guide Book, 1979 (Mobil Oil Corporation, Products Department, New York).
29. Larsson, R., Larsson, P. O., Eriksson, E., Sjöberg, M., and Höglund, E. Lubricant properties for input to hydrodynamic and elastohydrodynamic lubrication analyses. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2000, 214, 17-28.
30. Larsson, R. and Andersson, O. Lubricant thermal conductivity and heat capacity under high pressure. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2000, 214, 337-342.
31. Merritt, H. E. Gear tooth contact phenomena. Proc. Instn Mech. Engrs, 1962, 176, 141-154.