A lubricant model considering wall-slip in EHL line contacts

Journal of Tribology

Volumn 125, Issue 3, 2003, Pages 523-532

  Ståhl, Jonas ^a   Jacobson, Bo O ^a  

^a LUND INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

INTERFACES (MATERIALS); LUBRICANTS; SHEAR STRESS;

LINE CONTACTS;

TRIBOLOGY;

CONTACT; ELASTOHYDRODYNAMIC LUBRICATION; MODEL; RHEOLOGY; SHEAR STRESS; VELOCITY;

EID: 0038335443     PISSN: 07424787     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1537750     Document Type: Article

References (42)

1. Smith, F. W., 1958, "Lubricant Behavior in Concentrated Contact Systems-The Castor-Oil Steel System," Wear, 2, pp. 250-263.
2. Smith, F. W., 1960, "Lubricant Behavior in Concentrated Contact Systems-Some Rheological Problems," ASLE Trans., 3, pp. 18-25.
3. Smith, F. W., 1962, "The Effect of Temperature in Concentrated Contact Lubrication," ASLE Trans., 5, pp. 142-148.
4. Jacobson, B. O., 1970, "On the Lubrication of Heavily Loaded Spherical Surfaces Considering Surface Deformations and Solidification of the Lubricant," Acta Polytech. Scand., Mech. Eng. Ser., 54, Stockholm Sweden.
5. Jacobson, B. O., 1972, "Elasto-Solidifying Lubrication of Spherical Surfaces," ASME Paper No. 72-Lub-7.
6. Jacobson, B. O., 1972, "On the Lubrication of Heavily Loaded Cylindrical Surfaces Considering Surface Deformations and Solidification of the Lubricant," ASME Paper No. 72-Lub-44.
7. Winer, W. O., and Sanborn, D. M., 1978, "Surface Temperatures and Glassy State Investigations in Tribilogy," NASA CR-3031.
8. Höglund, E., and Jacobson, B. O., 1986, "Experimental Investigation of the Shear Strength of Lubricants Subjected to High Pressure and Temperature," ASME J. Tribol., 108, pp. 571-578.
9. Jacobson, B. O., 1989, "A High Pressure-Short Time Shear Strength Analyser for Lubricants," ASME J. Tribol., 107, pp. 220-223.
10. Höglund, E., 1989, "The Relationship Between Lubricant Shear Strength and Chemical Composition of the Base Oil," Wear, 130, pp. 213-224.
11. Feng, R., and Ramesh, K. I., 1993, "The Rheology of Lubricants at High Shear Rates," ASME J. Tribol., 115, pp. 640-649.
12. Ehret, P., Dowson, D., and Taylor, C. M., 1998, "On Lubricant Transport Conditions in Elastohydrodynamic Conjunctions," Proc. R. Soc. London, Ser. A. A454, pp. 763-787.
13. Dowson, D., and Ehret, P., 1999, "Past, Present and Future Studies in Elastohydrodynamics," Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol., 213, pp. 317-333.
14. Kaneta, M., Nishikawa, H., and Kameishi, K., 1990, "Observation of Wall Slip in Elastohydrodynamic Lubrication," ASME J. Tribol., 112, pp. 447-452.
15. Kaneta, M., Nishikawa, H., Kanada, T., and Matsuda, K., 1997, "Abnormal Phenomena Appearing in EHL Contacts," ASME J. Tribol., 118, pp. 886-892.
16. Kaneta, M., 1999, "For the Establishment of a New EHL Theory," Lubrication at the Frontier, Proceedings of the 25th Leeds-Lyon Symposium on Tribology, D. Dowson et al. eds., Elsevier Science B. V., Amsterdam, pp. 25-36.
17. Kaneta, M., and Nishikawa, H., 2000, "Formation of Dimples in Elliptical EHL Contacts," Thinning Films and Tribological Interfaces, Proceedings of the 26th Leeds-Lyon Symposium on Tribology, D. Dowson et al., eds., Elsevier Science B. V., Amsterdam, pp. 599-607.
18. Yang, P., Qu, S., Kaneta, M., and Nishikawa, H., 2001, "Formation of Steady Dimples in Point TEHL Contacts," ASME J. Tribol., 123, pp. 42-49.
19. Ehret, P., Dowson, D., and Taylor, C. M., 1999, "Transient EHL Solutions With Interfacial Slip," ASME J. Tribol., 121, pp. 703-710.
20. Ehret, P., and Bauget, F., 2001, "Observation of Kaneta's Dimples in Elastohydrodynamic Lubrication Contacts," Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol., 215, pp. 289-300.
21. Mazuyer, D., Varenne, E., Lubrecht, A. A., Georges, J-M., and Constans, B., 1999, "Shearing of Adsorbed Polymer Layers in an Elastohydrodynamic Contact in Pure Sliding." Lubrication at the Frontier, Proceedings of the 25th Leeds-Lyon Symposium on Tribology, D. Dowson et al., eds., Elsevier Science B. V., Amsterdam, pp. 493-504.
22. Piau, J-M., Kissi, N., and Mezghani, A., 1995, "Slip flow of Polybutadiene Through Flourinated Dies," J. Non-Newtonian Fluid Mech., 59, pp. 11-30.
23. Brochard, F., and de Gennes, P. G., 1992, "Shear-Dependent Slippage at a Polymer/Solid Interface," Langmuir, 8, pp. 3033-3037.
24. Lau, H. C., and Schowalter, W. R., 1986, "A Model for Adhesive Failure of Viscoelastic Fluids During Flow," J. Rheol., 30, pp. 193-206.
25. Hill, D. A., 1998, "Wall-Slip in Polymer Melts: A Pseudo-Chemical ModelA Model," J. Rheol., 42, pp. 581-601.
26. Jacobson, B. O., and Hamrock, B. J., 1983, "Non-Newtonian Fluid Model Incorporated Into Elastohydrodynamic Lubrication of Rectangular Contacts," NASA TM 83318 1983.
27. Dowson, D., and Higginson, G. R., 1966, Elastohydrodynamic Lubrication, The Fundamentals of Roller and Gear Lubrication, Pergamon Press, Oxford, Great Britain.
28. Roelands, C. J. A., 1966, "Correlation Aspects of the Viscosity-Temperature-Pressure Relationship of Lubricating Oils," Ph.D. thesis. Technical University Delft, Delft. The Netherlands.
29. Bair, S., and Winer, W. O., 1979, "A Rheological Model for Elastohydrodynamic Contacts Based on Primary Laboratory Data," ASME J. Lubr. Technol., 101, pp. 258-265.
30. Gecim, B., and Winer, W. O., 1980, "Lubricant Limiting Shear Stress Effect on EHD Film Thickness," ASME J. Lubr. Technol., 102, pp. 213-221.
31. Lee, R.-T., and Hamrock, B. J., 1990, "A Circular Non-Newtonian Fluid Model: Part I-Used in Elastohydrodynamic Lubrication," ASME J. Tribol., 112, pp. 486-496.
32. Hsiao, H-S. S., and Hamrock, B. J., 1992, "A Complete Solution for Thermal-Elastohydrodynamic Lubrication of Line Contact Using Circular Non-Newtonian Fluid Model," ASME J. Tribol., 114, pp. 540-552.
33. Evans, C. R., and Johnson, K. L., 1986, "The Rheological Properties of Elastohydrodynamic Lubricants," Proc. Instn. Mech. Engrs., Part C5, 200, pp. 303-312.
34. Schipper, D. J., Vroepop, P. H., de Gee, A. W. J., and Bosma, R., 1990, "Micro-EHL in Lubricated Contacts," ASME J. Tribol., 112, pp. 392-397.
35. Bair, S., and Winer, W. O., 1992, "The High Pressure High Shear Stress Rheology of Liquid Lubricants," ASME J. Tribol., 114, pp. 1-13.
36. Kato, K., Iwasaki, T., Kato, M., and Inoue, K., 1993, "Evaluation of Limiting Shear Stress of Lubricants by Roller Test," JSME Int. J., Ser. C. 36(4), pp. 512-522.
37. Kato, K., Kato, M., Inoue, K, and Hata, H., 1996, "Evaluation of Limiting Shear Stress of Lubricants for Design of Traction Drives," ASME Proceedings of the 7th International Power Transmission and Gearing Conference, ASME, New York, pp. 113-118.
38. Östensen, J. O., Wikström, V., and Höglund, E., 1993, "Interaction Effects Between Temperature, Pressure and Type of Base Oil on Lubricant Shear Strength Coefficient," Tribologia Finnish Journal of Tribology, 11(4), pp. 123-132.
39. Wilkström, V., and Höglund, E., 1994, "Investigation of Parameter Affecting the Limiting Shear Stress-Pressure Coefficient: A New Model Incorporating Temperature," ASME J. Tribol., 116, pp. 612-620.
40. Venner, C. H., and Lubrecht, A. A., 2000, "Multilevel Methods in Lubrication," Tribology Series 37 (Editor, Dowson, D.), Elsevier Science B. V., Amsterdam, The Netherlands, ISBN 0 444 505 032.
41. Venner, C. H., 1991, "Multilevel Solution of the EHL Line and Point Contact Problems," Ph.D. thesis, University of Twente, Enschede, The Netherlands, ISBN 90-9003974-0.
42. Ivonen, H. T., and Hamrock, B. J., 1991, "A Non-Newtonian Fluid Model for Elastohydrodynamic Lubrication of Rectangular Contacts," Wear, 143, pp. 297-305.