Jets in crossflow mixing analysis using computational fluid dynamics and mathematical optimization

Journal of Propulsion and Power

Volumn 23, Issue 3, 2007, Pages 618-628

  Morris, R M ^a,b   Snyman, J A ^a,b   Meyer, J P ^a,b  

^a UNIVERSITY OF PRETORIA   (South Africa)

^b Department of Mechanical and Aeronautical Engineering ^*  (South Africa)

Author keywords

[No Author keywords available]

Indexed keywords

JETS; MATHEMATICAL MODELS; NUMERICAL METHODS; OPTIMIZATION; PARAMETER ESTIMATION; TEMPERATURE DISTRIBUTION;

CROSSFLOW; INJECTION PLANES; MOMENTUM FLUX;

COMPUTATIONAL FLUID DYNAMICS;

EID: 34250346565     PISSN: 07484658     EISSN: 15333876     Source Type: Journal    
DOI: 10.2514/1.22136     Document Type: Article

References (39)

1. Kamotani, Y., and Greber, J., "Experiments on Confined Turbulent Jets in Cross Flow," NASA CR-2392, 1974.
2. Holdeman, J. D., Srinivasan, R., and Berenfeld, A., "Experiments in Dilution Jet Mixing," AIAA Journal, Vol. 22, No. 10, 1984, pp. 1436-1443.
3. Cluas, R. W., and Vanka, S. P., "Multigrid Calculations of a Jet in Crossflow," Journal of Propulsion and Power, Vol. 8, No. 2, 1992, pp. 425-431.
4. Bain, D. B., Smith, C. E., Liscinsky, D, S., and Holdeman, J. D., "Flow Coupling Effects in Jet-in-Crossflow Flowfields," Journal of Propulsion and Power, Vol. 15, No. 1, 1999, pp. 10-16.
5. Spencer, A., "Gas Turbine Combustor Port Flows," Ph.D. Dissertation, Aeronautical and Automotive Engineering and Transport Studies Department, Loughborough University, Loughborough, U.K., 1998.
6. Srinivasan, R., Berenfeld, A., and Mongia, H. C., "Dilution Jet Mixing Program: Phase I Report," NASA CR-168031, 1982.
7. Srinivasan, R., Coleman, E., and Johnson, K., "Dilution Jet Mixing Program: Phase II Report," NASA CR-174624, 1984.
8. Srinivasan, R., Myers, G., Coleman, E., and White, C., "Dilution Jet Mixing Program: Phase III Report," NASA CR-174884, 1985.
9. Srinivasan, R., and White, C., "Dilution Jet Mixing Program: Supplementary Report," NASA CR-175043, 1986.
10. Holdeman, J. D., "Perspectives on the Mixing of a Row of Jets with a Confined Crossflow," AIAA Paper 83-1200, 1983; also NASA TM 83457.
11. Holdeman, J. D., "Modeling Dilution Jet Flowfields," Journal of Propulsion and Power, Vol. 2, No. 1, 1986, pp. 4-10.
12. Liscinsky, D. S., and True, B., "Experimental Investigation of Crossflow Jet Mixing in a Rectangular Duct," AIAA Paper 93-2037, 1993; also NASA TM 106152.
13. Kroll, J. T., Sowa, W. A., Samuelsen, G. S., and Holdeman, J. D., "Optimization of Circular Orifice Jets Mixing into a Heated Cross Flow in a Cylindrical Duct," AIAA Paper 93-0249, 1993; also NASA TM 105984.
14. Hatch, M. S., Sowa, W. A., Samuelsen, G. S., and Holdeman, J. D., "Jet Mixing into a Heated Cross Flow in a Cylindrical Duct: Influence of Geometry and Flow Variations," AIAA Paper 92-0773, 6-9 January 1992; also NASA TM 105390.
15. Holdeman, J. D., Reynolds, R., and White, C., "A Numerical Study of the Effects of Curvature and Convergence on Dilution Jet Mixing," AIAA Paper 87-1953, 1987; also NASA TM 89878.
16. Holdeman, J. D., "Mixing of Multiple Jets with a Confined Subsonic Crossflow," Progress in Energy and Combustion Science, Vol. 19, 1993, pp. 31-70.
17. Liscinsky, D. S., and True, B., "Enhanced Mixing in a Rectangular Duct," NASA CR-212320, 2003.
18. Oechsle, V. L., "Mixing and NOx Emission Calculations of Confined Reacting Jet Flows in a Cylindrical Duct," NASA CR-212321, 2003.
19. St. John, S., and Samuelsen, G. S., "Detailed Studies of the Quick Mixing Region in Rich Burn Low-NOx Combustion," NASA CR-212316, 2003.
20. Bain, D. B., Smith, C. E., and Holdeman, J. D., "CFD Mixing Analysis of Axially Opposed Rows of Jets Injected into Confined Crossflow," AIAA Paper 93-2044, 1993; also NASA TM 106179.
21. Bain, D. B., Smith, C. E., and Holdeman, J. D., "CFD Mixing Analysis of Jets Injected from Straight and Slanted Slots into Confined Crossflow in Rectangular Ducts," AIAA Paper 92-3087, 1992; also NASA TM 105699.
22. Bain, D. B., Smith, C. E., and Holdeman, J. D., "CFD Assessment of Orifice Aspect Ratio and Mass Flow Ratio on Jet Mixing in Rectangular Ducts," AIAA Paper 94-0218, 1994; also NASA TM 106434.
23. Bain, D. B., Smith, C. E., and Holdeman, J. D., "Jet Mixing and Emission Characteristics of Transverse Jets in Annular and Cylindrical Confined Crossflow," AIAA Paper 95-2995, 1995; also NASA TM 106976.
24. Holdeman, J. D., Liscinsky, D. S., Oechsle, V. L., Samuelsen, G. S., and Smith, C. E., "Mixing of Multiple Jets with a Confined Subsonic Crossflow in a Cylindrical Duct," ASME Paper 96-GT-482, 1996; also NASA TM 107185.
25. De Kock, D. J., Craig, K. J., and Pretorius, C. A., "Mathematical Maximisation of Minimum Residence Time for Two Strand Continuous Caster," Ironmaking and Steelmaking, Vol. 30, No. 3, 2003. pp. 229-234.
26. De Kock, D. J., and Visser, J. A., "Trade-Off Design of Extruded Heat Sinks Using Mathematical Optimization," Journal of Electronic Packaging, Vol. 126, Sept. 2004, pp. 333-341.
27. FLUENT, Software Package, Ver. 6.2.16, Fluent Inc., Lebanon, NH, 2004.
28. Holdeman, J. D., Walker, R. E., and Kors, D. L., "Mixing of Multiple Dilution Jets with a Hot Primary Airstream for Gas Turbine Combustors," AIAA Paper 73-1249, 1973.
29. He, G., Guo, Y., and Hsu, A. T., "The Effect of Schmidt Number on Turbulent Scalar Mixing in a Jet-in-Crossflow," International Journal of Heat and Mass Transfer, Vol. 42, No. 20, 1999, pp. 3727-3738.
30. Anand, M. S., Zhu, J., Connor, C., and Razdan, M. K., "Combustor Flow Analysis Using an Advanced Finite-Volume Design System," ASME Paper 99-GT-273, 1999.
31. Lefebvre, A. H., Gas Turbine Combustion, Hemisphere Publishing Corp., Washington, D.C., 1983, p. 142.
32. Snyman, J. A., Stander, N., and Roux, W. J., "A Dynamic Penalty Function Method for the Solution of Structural Optimisation Problems," Applied Mathematical Modelling, Vol. 18, No. 8, 1994, pp. 453-460.
33. Snyman, J. A., and Hay, A. M., "The Dynamic-Q Optimization Method: An Alternative to SQP?," Computers and Mathematics with Applications, Vol. 44, No. 12, 2002, pp. 1589-1598.
34. Craig, K. J., De Kock, D. J., and Snyman, J. A., "Using CFD and Mathematical Optimization to Investigate Air Pollution due to Stacks," International Journal for Numerical Methods in Engineering, Vol. 44, No. 4, 1999, pp. 551-565.
35. Visser, J. A., and De Kock, D. J., "Optimization of Heat Sink Mass Using the Dynamic-Q Numerical Optimization Method," Communications in Numerical Methods in Engineering, Vol. 18, No. 10, 2002, pp. 721-727.
36. Els, P. S., and Uys, P. E., "Investigation of the Applicability of the Dynamic-Q Optimization Algorithm to Vehicle Suspension Design," Mathematical and Computer Modelling, Vol. 37, Nos. 9-10, 2003, pp. 1029-1046.
37. Hay, A. M., and Snyman, J. A., "Optimization of a Planar Tendon-Driven Manipulator for a Maximal Dextrous Workspace," Engineering Optimization, Vol. 37, No. 3, 2005, pp. 217-236.
38. Snyman, J. A., "The LFOPC Leap-Frog Algorithm for Constrained Optimisation," Computers and Mathematics with Applications, Vol. 40, No. 8, 2000, pp. 1085-1096.
39. Craig, K. J., De Kock, D. J., and Gauche, P., "Minimization of Heat Sink Mass Using Mathematical Optimization," ASME Journal of Electronic Packaging, Vol. 121, No. 3, 1999, pp. 143-147.