Dynamic ductile fracture in aluminum round bars: Experiments and simulations

International Journal of Fracture

Volumn 143, Issue 4, 2007, Pages 317-332

  Anvari, Majid ^a   Liu, Jun ^b   Thaulow, Christian ^a  

^a NORWEGIAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Norway)

^b SINTEF MATERIALS AND CHEMISTRY   (Norway)

Author keywords

Cohesive zone modeling; Dynamic loading; Gurson model; Rate sensitivity; Round bars

Indexed keywords

ALUMINUM; COMPUTER SIMULATION; DUCTILE FRACTURE; DYNAMIC LOADS; ELASTOPLASTICITY; ELONGATION; FINITE ELEMENT METHOD; STRAIN RATE; VISCOELASTICITY;

ALUMINUM ROUND BARS; COHESIVE ZONE MODELING; GURSON MODEL; GURSON-TVERGAARD-NEEDLEMAN (GTN) FORMULATION; RATE SENSITIVITY;

BARS (METAL);

EID: 34250219643     PISSN: 03769429     EISSN: 15732673     Source Type: Journal    
DOI: 10.1007/s10704-007-9062-9     Document Type: Article

References (37)

1. ABAQUS (2003) ABAQUS Version 6.4. H.K.S. Inc. Pawtucket, USA
2. Anderson A (1995) Fracture mechanics, fundamentals and applications, 2nd edn. CRC Press
3. Anvari M, Scheider I, Thaulow C (2006) Simulation of dynamic ductile crack growth using strain-rate and triaxiality dependent cohesive elements. Eng Fract Mech 73:2210-2228
4. Barenblatt G (1962) The mathematical theory of equilibrium cracks in brittle fracture. Adv Appl Mech 7:55-129
5. Børvik T, Hopperstad O, Berstad T (2003) On the influence of triaxiality and strain rate on the behavior of a structural steel. part II. Numerical study. Eur J Mech A/Solids 22:15-32
6. Bridgman P (1952) Studies in large plastic flow and fracture. McGraw-Hill
7. Broberg K (1997) The cell model of materials. Comput Mech 19:447-452
8. Clausen A, Auested T (2002) Split-Hopkinson tension bar, experimental set-up and theoretical considerations. Technical report, SIMLab internal report no. R-16-02
9. Dugdale D (1960) Yielding of steel sheets containing slits. J Mech Phys Solids 8:100-104
10. El-Magd E, Brodmann M (2001) Influence of precipitates on ductile fracture of aluminum alloy AA7075 at high strain rates. Mater Sci Eng 307:143-150
11. Faleskog J, Shih C (1997) Micromechanics of coalescence-I. Synergistic effects of elasticity, plastic yielding and multi-size-scale voids. J Mech Phys Solids 45(1):21-50
12. Guinea G, Planas J, Elices M (1994) A general bilinear fit for the softening curve of the concrete. Mater Struct 27:99-105
13. Gurson J (1977) Continuum theory of ductile rupture by void nucleation and growth. Part I-yield criteria and flow rules for porous ductile media. J Eng Mater Technol 99:2-15
14. Hancock J (1992) Constraint and stress state effects in ductile fracture. In: Argon A (ed) Topics in fracture and fatigue. Springer-Verlag, New York, pp 99-144
15. Hillerborg A, Modéer M, Petersson P (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement Concr Res 6:773-782
16. Johnson J (1981) Dynamic fracture and spallation in ductile solids. J Appl Phys 52(4):2812-2825
17. Liu J (2004) A new dynamic void growth model. Norwegian University of Science and Technology, Norway, Doctoral Thesis
18. Mühlich U, Siegmund T, Brocks W (1998) A user-material subroutine of the modified Gurson-Tvergaard-Needleman model of porous metal plasticity for rate and temperature dependent hardening. Technical report, GKSS internal report no. WMG/98/1
19. Needleman A (1987) A continuum model for void nucleation by inclusion debonding. J Appl Mech 54:525-531
20. Needleman A (1990) An analysis of decohesion along an imperfect interface. Int J Fract 42:21-40
21. Needleman A (1997) Numerical modeling of crack growth under dynamic loading conditions. Comput Mech 19:463-469
22. Needleman A, Tvergaard V (1991) An analysis of dynamic, ductile crack growth in a double edge cracked specimen. Int J Fract 49:41-67
23. Négre P, Steglich D, Brocks W (2004) Crack extension in aluminium welds: A numerical approach using the Gurson-Tvergaard-Needleman model. Eng Fract Mech 71:2365-2383
24. Noor A, Needleman A, Peters J (1998) Sensitivity analysis for failure and damage in dynamically loaded tensile bars. Comput Methods Appl Mech Eng 151:461-478
25. Ruiz G, Pandolfi A, Ortiz M (2001) Three-dimensional cohesive modeling of dynamic mixed-mode fracture. Int J Numer Methods Eng 52: 97-120
26. Scheider I (2000) Cohesive model for crack propagation analyses of structures with elastic-plastic material behavior. Foundations and implimentation. Technical report, GKSS internal report no. WMS/2000/19
27. Scheider I, Brocks W (2003) Simulation of cup-cone fracture using the cohesive model. Eng Fract Mech 70:1943-1961
28. Siegmund T, Brocks W (1999) Prediction of the work of separation and implication to modeling. Int J Fract 99:97-116
29. Siegmund T, Brocks W (2000) A numerical study on the correlation between the work of separation and the dissipation rate in ductile fracture. Eng Fract Mech 67: 139-154
30. Sun DZ, Hönig A, Böhme W, Schmitt W (1994) Application of micromechanical models to the analysis of ductile fracture under dynamic loading. In: Erdogan F, Hartranft R (eds) Fracture mechanics: 25th Syp., ASTM STP 1220. American Society for Testing and Materials, Philadelphia, pp 343-357
31. Thaulow C, Burget W (1990) The emission of Rayleigh waves from brittle fracture initiation, and the possible effect of the reflected waves on crack arrest. Fatigue Fract Eng Mater Struct 13(4):327-346
32. Tvergaard V (1982) On localization in ductile materials containing spherical voids. Int J Fract 18:237-252
33. Tvergaard V (1990) Material failure by void growth to coalescence. Adv Appl Mech 27:83-151
34. Tvergaard V, Hutchinson J (1992) The relation between crack growth resistance and fracture process parameters in elastic-plastic solids. J Mech Phys Solids 40:1377-1397
35. Tvergaard V, Hutchinson J (1996) Effect of strain-dependent cohesive zone model on predictions of crack growth resistance. Int J Solids Struct 33(20-22):3297-3308
36. Tvergaard V, Needleman A (1984) Analysis of the cup-cone fracture in a round tensile bar. Acta Metall 32: 157-169
37. Xia L, Shih C (1995) Ductile crack growth I. A numerical study using computational cells with microstructurally-based length scales. J Mech Phys Solids 43(2): 233-259