Analysis and evaluation of a biomedical polycarbonate urethane tested in an in vitro study and an ovine arthroplasty model. Part II: In vivo investigation

Biomaterials

Volumn 26, Issue 6, 2005, Pages 633-643

  Khan, Imran ^a   Smith, Nigel ^b   Jones, Eric ^c   Finch, Dudley S ^d   Cameron, Ruth Elizabeth ^a  

^a UNIVERSITY OF CAMBRIDGE   (United Kingdom)

^b Fairfield Avenue   (United Kingdom)

^c Stryker Howmedica Osteonics   (Ireland)

^d UCB 450   (United States)

Author keywords

Animal model; Biocompatibility; Compliance; Elstomer; Hip replacement prostheses; Polyurethane

Indexed keywords

CALCIFICATION (BIOCHEMISTRY); DEGRADATION; DIFFERENTIAL SCANNING CALORIMETRY; ELASTOMERS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HIP PROSTHESES; HYDROLYSIS; POLYURETHANES;

ARTHOPLASTY; BIOSTABILITY;

POLYCARBONATES;

BIOMATERIAL; ELASTOMER; POLYCARBONATE URETHANE; POLYETHERURETHAN; POLYHEXAMETHYLENE OXIDE; POLYMER; POLYURETHAN; UNCLASSIFIED DRUG;

ACETABULOPLASTY; ACETABULUM; ANIMAL EXPERIMENT; ANIMAL TISSUE; ARTICLE; CONTROLLED STUDY; DIFFERENTIAL SCANNING CALORIMETRY; EVALUATION; FOLLOW UP; HIP ARTHROPLASTY; HYDROLYSIS; IN VITRO STUDY; IN VIVO STUDY; INFRARED SPECTROSCOPY; NONHUMAN; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; SHEEP;

ACETABULUM; ANIMALS; ARTHROPLASTY, REPLACEMENT, HIP; BIOCOMPATIBLE MATERIALS; BIODEGRADATION, ENVIRONMENTAL; DENSITOMETRY, X-RAY; EQUIPMENT FAILURE; HYDROLYSIS; MALE; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; MINERALS; MOLECULAR WEIGHT; OSTEOLYSIS; OXIDATION-REDUCTION; POLYCARBOXYLATE CEMENT; POLYURETHANES; PROSTHESES AND IMPLANTS; SHEEP; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; STRESS, MECHANICAL; SURFACE PROPERTIES;

ANIMALIA; OVIS;

EID: 3342912102     PISSN: 01429612     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.biomaterials.2004.02.064     Document Type: Article

References (52)

1. Khan I, Cameron RE, Smith N. Analysis and evaluation of a biomedical polycarbonate urethane tested in an in vitro study and an ovine arthroplasty model. Part I: material selection and evaluation. (Biomaterials, in press).
2. Okumura Y, Omori H, Ooki HH, Baba MO. The effects of cup abduction angle on the stability, PE wear of acetabular component in cementless total hip arthroplasty. Transactions of the 45th Annual Meeting, Orthopaedic Research Society, 1999. p. 928.
3. Malchau H, Herberts P. Revision and re-revision rate in THR: a revision - risk study of 148 359 primary operations. Prognosis of total hip replacement, Department of orthopaedics, University of Göteborg, Sweden; 1998.
4. Alexander JW, Kamaric E, Noble PC. The accuracy of acetabular reaming in total hip replacement. Transactions of the 45th Annual Meeting, Orthopaedic Research Society, 1999. p. 906.
5. Moody J, DiGioia A, Jaramaz B, Blackwell M, Colgan B, Nikou C. Inaccuracy of mechanical guides used for acetabular component alignment in total hip replacement. Transactions of the 45th Annual Meeting, Orthopaedic Research Society, 1999. p. 278.
6. Mai M.T., Schmalzried T.P., Dorey F.J., Campbell P.A., Amstutz H.C. The contribution of frictional torque to loosening at the cement-bone interface in Tharies hip replacements. J Bone Joint Surg Am. 78:1996;505-511
7. Shanbhag A.S., Jacobs J.J., Glant T.T., Gilbert J.L., Black J., Galante J.O. Composition, morphology of wear debris in failed uncemented total hip replacement. J Bone Joint Surg Br. 76:1994;60-67
8. Manley M.T., Serekian P. Wear debris. an environmental issue in TJR Clin Orthop. 298:1994;137-146
9. Cooper R.A., McAllister C.M., Borden L.S., Bauer T.W. Polyethylene debris-induced osteolysis and loosening in uncemented total hip arthroplasty. A cause of late failure. J Arthroplasty. 7:1992;285-290
10. Thanner J. The acetabular component in total hip arthroplasty. evaluation of different fixation principles Acta Orthop Scand Suppl. 286:1999;141
11. Kurtz S.M., Muratoglu O.K., Evans M., Edidin A.A. Advances in the processing, sterilization and crosslinking of ultra high molecular weight polyethylene for total joint arthroplasty. Biomaterials. 20:1999;1659-1688
12. McKellop H., Shen F.W., Di Maio W., Lancaster J.G. Wear of gamma-crosslinked polyethylene acetabular components. Clin Orthop. 369:1999;73-82
13. Muratoglu O.K., Bragdon C.R., O'Connor D.O., Skehan H., Delaney J., Jasty M., Harris W.H. The comparison of the wear behaviour of four different types of cross-linked acetabular components. J Orthop Res. 19(6):2001;1210
14. Laurent MP, Yao JQ, Gilbertson LN, Swarts DF, Crowninshield RD. Wear of highly cross-linked UHMWPE acetabular liners under adverse conditions. Transactions of the 25th Annual Meeting of the Society of Biomaterials, 2000. p. 874.
15. Li S., Burstein A.H. Current concepts review UHMWPE. J Bone Joint Surg Am. 76:1994;1080-1090
16. Laurent MP, Yao JQ, Bhambri SK, Gselli RA, Gilbertson LN, Swarts DF, Crowninshield RD. High cycle wear of highly cross-linked UHMWPE acetabular liners evaluated in hip simulator. Transactions of the 26th Annual Meeting of the Society of Biomaterials, 2000. p. 851.
17. Kellop HA, Di Maio WG, Shen F-W, LuB. Wear of gamma radiation crosslinked polyethylene acetabularcups after ageing and against roughened femoral heads. Transactions of the 45th Annual Meeting, Orthopaedic Research Society, 1999. p. 76.
18. Muratoglu OK, Bragdon CR, O'Connor DO, Jasty M, Harris WH. A comparison of 5 different types of highly cross-linked UHMWPEs: physical properties and wear behaviour. Transactions of the 45th Annual Meeting, Orthopaedic Research Society, 1999. p. 77.
19. McKellop H., Shen F.W., Liu B., Campbell P., Solovey R. Development of an extremely wear-resistant ultra high molecular weight polyethylene for total hip replacements. J Orthop Res. 17:1999;157-167
20. James S.P., Lee K.R., Beauregard G.P., Rentfrow E.D., McLaughlin J.R. Clinical wear of 63 ultra- high molecular weight polyethylene acetabular components. J Biomed Mater Res. 4B:1999;374-384
21. Shaw JH. The effect of gamma irradiation of UHMWPE medical devices agency - lit review; 1997. http://www.medical-devices.gov.uk
22. Shinde A., Salovey R. Irradiation of UHMWPE. J Polym Sci: Polym Phys Ed. 23:1985;1681
23. Naidu S.H., Bixler B.L., Moulton M.J.R. Radiation-induced physical changes in UHMWPE implant components. Orthopaedics. 20:1997;137-142
24. Bruns D.P., Olmstead M.L., Litsky A.S. Technique and results for total hip replacement in sheep. an experimental model Vet Comp Orthop Traumatol. 9:1996;158-164
25. Brumby S.A., Howie D.W., Pearcy M.J., Wang A.W., Nawana N.S. Radiographic and histological analysis of cemented double-tapered femoral stems. Clin Orthop. 355:1998;229-237
26. Bergmann G., Graichen F., Rohlmann A. Hip joint forces in sheep. J Biomech. 32(8):1999;769-777
27. Bergmann G., Siraky J., Rohlmann A., Koelbel R. A comparison of hip joint forces in sheep, dog and man. J Biomech. 17(12):1984;907-921
28. Bruns D.P., Olmstead M.L., Litsky A.S. Technique and results for total hip replacement in sheep. an experimental model Vet Comp Orthop Traumatol. 9:1996;158-164
29. Unsworth A. Recent developments in the tribology of artificial joints. Tribol Int. 28(7):1995;485-495
30. Dowson D. The lubrication of synovial joints. Proceedings of the 9th Canadian Congress of Applied Mechanics, University Saskatchewan, Canada; 1983, p. 15-30.
31. Dowson D., Fisher J., Jin Z-.M., Auger D.D., Jobbins B. Design considerations in cushion form bearings for artificial hip joints. Proc Inst Mech Eng. 205(Part H):1991;52-68
32. Smith N, Doyle C, Jones E. Prosthetic bearing element and process for making such an element European Patent No EP698382, 1996.
33. Field J.R., Aberman H., Carbone A., Sharpe P., Smith N., Dunlop D., Howie D.W. An ovine model for total hip replacement. operative procedure and complications Vet Comp Orthop Traumatol. 14:2001;32-39
34. Vernon-Roberts B. Institutional ethics committee guidelines, University of Adelade, Australia. Personal communication; April 1997.
35. Carbone A, McGee M, Field J, Howie AH, Smith N, Jones E. Compliant layer sheep hip arthroplasty project: results of an in vivo time series study. Vet J Biomater, in draft.
36. Caravia L., Dowson D., Fisher J. Start up and steady-state friction of thin polyurethane layers. Wear. 160(1):1993;191-197
37. Martin D.J., Meijs G.F., Gunatillake P.A., Renwick G.M., McCarthy S. The effect of average soft segment length on morphology and properties of a series of polyurethane elastomers. 2. SAXS-DSC annealing study. J Appl Polym Sci. 64:1997;803-817
38. Hu W., Koberstein The effect of thermal annealing on the thermal properties and molecular weight of a segmented polyurethane copolymer. J Polym Sci: Part B: Polym Phys. 32:1994;437-446
39. Eisenbach C.D., Baumgartner M., Gunter C. Advances in Elastomers and Rubber Elasticity. Lal J., Mark J.E.:1986;Plenum, New York
40. Santerre J.P., Labow R.S. The effect of hard segment size on the hydrolytic stability of polyether-urea-urethanes when exposed to cholesterol esterase. J Biomed Mater Res. 36:1997;223-232
41. Smith R., Oliver C., Williams D.F. The enzymatic degradation of polymers in vitro. J Biomed Mater Res. 21:1987;991-1003
42. Labow R.S., Erfle D.J., Santerre J.P. Elastase-induced hydrolysis of synthetic solid substrates. poly(ester-urea-urethane) and poly(ether-urea- urethane) Biomaterials. 32(8):1999;769-777
43. Santerre J.P., Labow R.S., Adams G.A. Enzyme-biomaterial interactions. Effect of biosystems on degradation of polyurethanes J Biomed Mater Res. 27:1993;97-109
44. Santerre J.P., Labow R.S., Duguay D.C., Erfle D., Adams G.I. Biodegradation evaluation of polyesterurethanes with oxidative and hydrolytic enzymes. J Biomed Mater Res. 28:1994;1187-1199
45. Labow R.S., Duguay D.G., Santerre J.P. The enzymatic hydrolysis of a synthetic biomembrane. a new substrate for cholesterol and carboxyl esterases J Biomater Sci Polym Ed. 6:1994;169-179
46. Tang Y.W., Labow R.S., Santerre J.P. Enzyme-induced biodegradation of polycarbonate polyurethanes. dependence on hard-segment concentration J Biomed Mater Res. 56(4):2001;516-528
47. Tang Y.W., Labow R.S., Santerre J.P. Enzyme-induced biodegradation of polycarbonate-polyurethanes. dependence on hard-segment chemistry J Biomed Mater Res. 57(4):2001;597-611
48. Tang Y.W., Labow R.S., Revenko I., Santerre J.P. Influence of surface morphology and chemistry on the enzyme catalyzed biodegradation of polycarbonate-urethanes. J Biomater Sci Polym Ed. 13(4):2002;463-483
49. Oliver W.C., Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 7:1996;1564-1583
50. Wu Y., Sellitti J.M., Anderson A., Hiltner An FTIR-ATR investigation of in vivo poly (etherurethane) degradation. J Appl Polym Sci. 46:1992;201-211
51. Dillon J.G. Infrared spectroscopic atlas of polyurethanes. 1989;Technomic Publishing, Lancaster, Pennsylvania
52. Dowson D. Fluid film lubrication Osborne Reynolds Centenary. Proceedings of the 13th Leeds-Lyon Symposium on Tribology, Leeds, 1986.