Deposition pattern based thermal stresses in single-layer laser aided direct material deposition process

Journal of Manufacturing Science and Engineering

Volumn 129, Issue 2, 2007, Pages 319-332

  Ghosh, S ^a   Choi, J ^a  

^a Architectural and Environmental Engineering   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEPOSITION; FINITE ELEMENT METHOD; HEAT TRANSFER; LASER APPLICATIONS; PARAMETER ESTIMATION; PHASE TRANSITIONS; PROCESS CONTROL;

DEPOSITION PATTERNS; PROCESS PARAMETERS; TRANSPORT PHENOMENA;

THERMAL STRESS;

EID: 34249891656     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2401620     Document Type: Article

References (37)

1. Mazumder, J., Choi, J., Nagarathnam, K., Koch, J., and Hetzner, D., 1997, "The Direct Metal Deposition of H13 Tool Steel for 3-D Components," JOM, 49(5), pp. 55-60.
2. Choi, J., and Chang, Y., 2005, "Characteristics of Laser Aided Direct Metal Deposition Process for Tool Steel," Int. J. Mach. Tools Manuf., 45(4-5), pp. 597-607.
3. Klingbeil, N. W., Beuth, J. L., Chin, R. K., and Amon, C. H., 2002, "Residual Stress-Induced Warping in Direct Metal Solid Freeform Fabrication," Int. J. Mech. Sci., 44, pp. 57-77.
4. Nickel, A. H., Barnett, D. M., and Prinz, F. B., 2001, "Thermal Stresses and Deposition Patterns in Layered Manufacturing," Mater. Sci. Eng., A, 317, pp. 59-64.
5. Gram, J., and Znidarsic. M., 2004, "Microstructure, Microhardness, and Residual Stress Analysis of Laser Surface Cladding of Low-Carbon Steel," Mater. Manuf. Processes, 19(2), pp. 243-258.
6. Gram, J., and Sturm, R., 2004, "A New Experimental Technique for Measuring Strain and Residual Stresses during a Laser Remelting Process," J. Mater. Process. Technol., 147, pp. 351-358.
7. Inoue, T., 2002, "Metallo-Thermo-Mechanics- Application to Quenching," in Handbook of Residual Stress and Deformation of Steel, ASM International, pp. 296-311.
8. Inoue, T., Ju, D. Y., and Arimoto, K., 1992, "Metallo-Thermo- Mechanical Simulation of Quenching Process-Theory and Implementation of Computer Code-Hearts," Proceedings of the First International Conference on Quenching & Control of Distortion, Chicago, IL, Sept. 22-25, pp. 205-212.
9. Kahlen, F.-J., and Kar, A., 2001, "Residual Stresses in Laser-Deposited Metal Parts," J. Laser Appl., 13(12), pp. 60-69.
10. Dai, K., and Shaw, L., 2001, "Thermal and Stress Modeling of Multi-Material Laser Processing," Acta Mater., 49, pp. 4171-4181.
11. Bokota, A., and Iskierka, S., 1996, "Effect of Phase Transformation on Stress States in Surface Layer Laser Hardened Carbon Steel," ISU Int., 36(11), pp. 1383-1391.
12. Rangaswamy, P., Holden, T. M., Rogge, R. B., and Griffith, M. L., 2001, "Residual Stresses in Components Formed by the Laser-Engineered Net Shaping (LENS®) Process," J. Strain Anal. Eng. Des., 38(6), pp. 519-528.
13. Labudovic, M., Hu, D., and Kovacevic, R., 2003, "A Three Dimensional Model for Direct Laser Metal Powder Deposition and Rapid Prototyping," J. Mater. Sci., 38, pp. 35-49.
14. Finnie, S., Cheng, W., Finnie, I., Drezet, J. M., and Gremaud, M., 2003, "The Computation and Measurement of Residual Stresses in Laser Deposited Layers," ASME J. Eng. Mater. Technol., 125, pp. 302-308.
15. Das, S., Upadhya, G., and Chandra, U., 1992, "Prediction of Macro-and Micro-Residual Stress in Quenching using Phase Transformation Kinetics," Proceedings of the First International Conference on Quenching & Control of Distortion, ASM International, Chicago, IL, pp. 229-234.
16. Kirkaldy, J. S., and Venugopalan, D., 1984, "Prediction of Microstructure and Hardenability in Low Alloy Steels," in Phase Transformations in Ferrous Alloys, Am. Inst. Min. Engrs., pp. 125-148.
17. Watt, D. F., Coon, L., Bibby, M., Goldak, J., and Henwood, C., 1988, "An Algorithm for Modeling Microstructural Development in Weld Heat-Affected Zones (Part A) Reaction Kinetics," Acts Metall., 36(11), pp. 3029-3035.
18. Ashby, M. F., and Easterling, K. E., 1982, "A First Report on Diagrams for Grain Growth in Welds," Acta Metall., 30, pp. 1969-1978.
19. Oddy, A. S., Goldak, J. A., and McDill, J. M. J., 1989, "Transformation Effects in the 3D Finite Element Analysis of Welds," Proceedings of the Second International Conference on Trends in Welding Research, ASM International, Gatlinburg, TN, May 15-19.
20. Jarvstrat, N., and Sjostrom, S., 1993, "Current Status of TRAST; A Material Model Subroutine System for the Calculation of Quench Stresses in Steel," ABAQUS User's Conference Proceedings.
21. Denis, S., 1996, "Considering Stress-Phase Transformation Interactions in the Calculation of Heat Treatment Residual Stresses,"J. Phys. IV, 6, pp. C1-159-C1-174.
22. Roelens, I. B., Maltrud, F., and Lu, I., 1994, "Determination of Residual Stresses in Submerged Arc Multi-Pass Welds by means of Numerical Simulation and Comparison with Experimental Results," Weld. World, 33(3), pp. 152-159.
23. Andersson, B. A. B., 1978, "Thermal Stresses in a Submerged-Arc Welded Joint Considering Phase Transformations," ASME J. Eng. Mater. Technol., 100, pp. 356-362.
24. Choi, J., and Mazumder, J., 2002, "Numerical and Experimental Analysis for Solidification and Residual Stresses in GMAW process for AISI 304 Stainless Steel," J. Mater. Sci., 37, pp. 2143-2158.
25. Kelly, S. M., and Kampe, S. L., 2004, "Microstructural Evolution in Laser-Deposited Multilayer Ti-6A1-4V Builds: Part I. Microstructural Characteristics," Metall. Mater. Trans. A, 35A, pp. 1861-1867.
26. Kelly, S. M., and Kampe, S. L., 2004, "Microstructural Evolution in Laser-Deposited Multilayer Ti-6A1-4V Builds: Part II. Thermal Modeling," Metall. Mater. Trans. A, 35A, pp. 1869-1879.
27. Calrslaw, H. S., and Jaeger, I. C. 1959, Conduction of Heat in Solids, 2nd ed., Oxford U.P., Oxford.
28. Ghosh, S., and Choi, J., 2005, "Three-Dimensional Transient Finite Element Analysis for Residual Stresses in the Laser Aided Direct Metal/Material Deposition Process," J. Laser Appl., 17(3), pp. 144-158.
29. ABAQUS/Standard User's Manual and Keywords Manual, version 6.4.
30. Touloukian, Y. S., and Ho, C. Y., 1970, "Thermo Physical Properties of Matter-The TPRC Data Series by Purdue University," IFI/Plenum Data Corp., New York.
31. Ghosh, S., 2003, "Three-Dimensional Transient Residual Stress FE Analysis for Single and Double Pass Laser Aided Direct Metal/Material Deposition Process," M.S. thesis, University of Missouri-Rolla.
32. Gardon, R., and Cobonque, J., 1961, "Heat Transfer Between a Flat Plate and Jets of Air Impinging on it," International Conference on Heat Transfer, Part II, pp. 454-460.
33. Steen, W. M., 1976, "The Printing of Laser Generated Heat Images in Cobalt Oxide on Glass Substrates," Ph.D. thesis, Imperial College, London.
34. Boyer, H. E., and Gray, A. G., 1977, Atlas of Isothermal Transformation and Cooling Transformation Diagrams, American Society for Metals, Metals Park, OH.
35. Choi, J., and Mazumder, J., 1994, "Non-Equilibrium Synthesis of Fe-Cr-C-W alloy by Laser Cladding," J. Mater. Sci., 29, pp. 4460-4476.
36. Choi, J., Choudhuri, S. K., and Mazumder, J., 2000, "Role of Preheating and Specific Energy Input on the Evolution of Microstructure and Wear Properties of Laser Clad Fe-Cr-C-W Alloys," J. Mater. Sci., 35, pp. 3213-3219.
37. Ghosh, S., and Choi, J., 2006, "Modeling and Experimental Verification of Transient/Residual Stresses and Microstructure Formation in Multi-Layer Laser Aided DMD Process," ASME J. Heat Transfer, 128, pp. 662-679.