Introduction to Structural Health Monitoring

Structural Health Monitoring

Volumn , Issue , 2010, Pages 13-43

  Balageas, Daniel ^a,b  

^a ONERA   (France)

^b UNIVERSITÉ PARIS SACLAY   (France)

Author keywords

Computational power; Constituent materials; Data transmission; Monitoring function; Wider systems

Indexed keywords

EID: 34249743851     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470612071.ch1     Document Type: Chapter

References (50)

1. BALAGEAS D.L., "Le contrôle de santé de structure integer", in Systèmes et microsystèmes pour la caractérisation, Proceedings C2I Conference, vol. 2, Ed. F. Lepoutre, D. Placko and Y. Surrel, Hermes Sciences Publications, Paris 2001, pp. 14-43.
2. BALAGEAS D.L., "Structural Health Monitoring R & D at the European Research Establishments in Aerospace (EREA)", in Structural Health Monitoring - The Demands and Challenges, Third International Workshop on Structural Health Monitoring, September 12-14, 2001, Stanford, CA, ed. Fu-Kuo Chang, CRC Press, Boca Raton, London, New York, Washington D.C., 2001, pp.12-29.
3. BARTELDS G., "Aircraft structural health monitoring, prospects for smart solutions from a European viewpoint", Structural Health Monitoring - Current Status and Perspectives, Proceedings of the First International Workshop on Structural Health Monitoring, Stanford, CA, September 18-20, 1997, Lancaster - Basel, Technomic Publishing Co, Inc, pp. 293-300.
4. BERAL B., SPECKMANN H., "Structure Health Monitoring (SHM) for aircraft structures: a challenge for system developers and aircraft manufacturers", Structural Health Monitoring 2003, from Diagnostics & Prognostics to Structural Health Management, Proceedings of the 4th International Workshop on Structural Health Monitoring, Stanford, CA, September 15-17, 2003, Lancaster, PA, DEStech Publications, Inc, pp. 12-29.
5. BOIS C., HOCHARD C., "Measurement and modelling for the monitoring of damaged laminate composite structure", Structural Health Monitoring 2002, Proceedings of the First European Workshop on Structural Health Monitoring, Cachan, France, July 10-12, 2002, Lancaster, PA, DEStech Publications, Inc, pp. 425-432.
6. CHAILLEUX E., SALVIA M., JAFFREZIC-RENAULT N., JAYET Y., MAZZOUZ A., SEYTRE G., "In situ multidetection cure monitoring of an epoxy-amine system", Journal of Advanced Sci., 12, 3, 2000, pp. 291-297.
7. CHAILLEUX E., SALVIA M., JAFFREZIC-RENAULT N., MATEJEC V., KASIC I., "In situ study of the epoxy cure process using a fiber optic sensor", Smart Materials and Structures, 10, 2001, pp. 1-9.
8. CHANG F.-K., "Structural Health Monitoring: a summary report on the First International Workshop on Structural Health Monitoring, September 18-20, 1997", Structural Health Monitoring 2000, Proceedings of the Second International Workshop on Structural Health Monitoring, Stanford, CA, September 8-10, 1999, Lancaster - Basel, Technomic Publishing Co, Inc, pp. xix-xxiv.
9. CHANG F.-K., "Ultra reliable and super safe structures for the new century", Structural Health Monitoring 2002, Proceedings of the First European Workshop on Structural Health Monitoring, Cachan, France, July 10-12, 2002, Lancaster, PA, DEStech Publications, Inc, pp. 3-12.
10. CHOI Y.K., SALVIA M., "Processing and modeling of adaptive glass-epoxy laminates with embedded shape memory alloys", Proceedings of the 10th International Conference on Adaptive Structures and Technologies, Paris, France, 1999, Lancaster- Basel, Technomic Publishing Co, Inc., pp. 221-228.
11. DEGAMBER B., FERNANDO G.F., "Process monitoring of fiber reinforced polymer composites", Materials Research Bulletin, Special issue on optical fiber sensors, March 2002.
12. DEGAMBER, B., DUMITRESCU O., FERNANDO G.F., "Microwave processing of thermosets: non-contact cure monitoring and fiber optic temperature sensors", Int. Conf. Fiber Reinforced Composites 2002, Newcastle, March 26-28, 2002, pp. 416-423.
13. DE ROSSI D., CARPI F., LORUSSI F., MAZZOLDI A., SCILINGO P., TOGNETTI A., "Electroactive polymer fibers and fabrics for distributed, conformable and interactive systems", Structural Health Monitoring 2002, Proceedings of the First European Workshop on Structural Health Monitoring, Cachan, France, July 10-12, 2002, Lancaster, PA, DEStech Publications, Inc, pp. 106-114.
14. DERRISO M.M., PRATT D.M., HOMAN D.B., SCHROEDER J.B., BORTNER R.A., "Integrated Vehicle Health Management: the key to future aerospace systems", Structural Health Monitoring 2003, from Diagnostics & Prognostics to Structural Health Management, Proceedings of the 4th International Workshop on Structural Health Monitoring, Stanford, CA, September 15-17, 2003, Lancaster, PA, DEStech Publications, Inc, pp. 3-11.
15. DEWYNTER-MARTY V., FERDINAND P., BOCHERENS E., CARBONE R., BERENGER H., BOURASSEAU S., DUPONT M., BALAGEAS D., "Embedded fiber Bragg grating sensors for industrial composite cure process monitoring", Journal of Intelligent Material Systems and Structures, 9, 10, 1999, pp. 785-787.
16. DRY C., "Timed release of chemicals in cementitious material after the material has hardened to repair cracks, rebond fibers, and increase flexural toughening", Fracture Mechanics 25th vol. ASTM. STP 1220, Philadelphia, 1994, pp. 123-127.
17. DRY C., "Procedures developed for self repair of polymer matrix composites materials", Composite Structures, 35, 1996, pp. 263-269.
18. DUPONT M., OSMONT D., GOUYON R., BALAGEAS D.L., "Permanent monitoring of damaging impacts by a piezoelectric sensor based integrated system", Structural Health Monitoring 2000, Proceedings of the Second International Workshop on Structural Health Monitoring, Stanford, CA, September 8-10, 1999, Lancaster-Basel, Technomic Publishing Co, Inc, pp. 561-570.
19. FRANGOPOL D.M., "New directions and research needs in life-cycle performance and cost of civil infrastructures", Structural Health Monitoring 2003, from Diagnostics & Prognostics to Structural Health Management, Proceedings of the 4th International Workshop on Structural Health Monitoring, Stanford, CA, September 15-17, 2003, Lancaster, PA, DEStech Publications, Inc, pp. 53-63.
20. GANDHI M.V., THOMPSON B.S., Smart Materials and Structures, Chapman and Hall, 1992.
21. GIURGIUTIU V., "Embedded Ultrasonics NDE with Piezoelectric Wafer Active Sensors", Instrumentation, Mesure, Métrologie, 3, 3-4, 2003, pp. 149-180.
22. GOGGIN P., HUANG J., WHITE E., HAUGSE E., "Challenge for SHM transition to future aerospace systems", Structural Health Monitoring 2003, from Diagnostics & Prognostics to Structural Health Management, Proceedings of the 4th International Workshop on Structural Health Monitoring, Stanford, CA, September 15-17, 2003, Lancaster, PA, DEStech Publications, Inc, pp. 30-41.
23. GORANSON U.G., "Jet transport structures performance monitoring", Structural Health Monitoring - Current Status and Perspectives, Proceedings of the First International Workshop on Structural Health Monitoring, Stanford, CA, September 18- 20, 1997, Lancaster-Basel, Technomic Publishing Co, Inc, pp. 3-17.
24. GUNN III L.C., "Operational Experience with Health Monitoring on the Delta II Program", Structural Health Monitoring 2000, Proceedings of the Second International Workshop on Structural Health Monitoring, Stanford, CA, September 8-10, 1999, Lancaster - Basel, Technomic Publishing Co, Inc, pp. 133-141.
25. IKEGAMI R., "Structural Health Monitoring: assessment of aircraft customer needs", Structural Health Monitoring 2000, Proceedings of the Second International Workshop on Structural Health Monitoring, Stanford, CA, September 8-10, 1999, Lancaster - Basel, Technomic Publishing Co, Inc, pp. 12-23.
26. JAYET Y., BABOUX J.C., "Monitoring the cycle of life of polymer based composites by an embedded piezoelectric element", Proceedings of the 8th Int. Conference on Adapt. Structures, Wakayama, Y. Murotsu et al. Eds, 1997, pp. 177-183.
27. KRANBUEHL, D.E., "Continuous dielectric measurement of polymerizing systems", Journal of Non-Crystalline Solids, 131 part 2, 1991, pp. 930-934.
28. KRAPEZ J.-C., TAILLADE F., GARDETTE G., BALAGEAS D., "La vibrothermographie par ondes de Lamb: vers une nouvelle méthode de CND?", (in French), Journée Soc. Franç. des Thermiciens, March 31, 1998, Châtillon.
29. LEMISTRE M., MARTINEZ D., BALAGEAS D.L., "Electromagnetic structural health monitoring for carbon-epoxy multilayer materials", Proceedings of European COST F3 Conference, Ed. J. A., Güemes, Madrid, Spain, 2000, pp. 687-695.
30. LEMISTRE M., OSMONT D., BALAGEAS D.L., "Active health monitoring system based on wavelet transform analysis of diffracted Lamb waves", SPIE Proceedings, vol. 4073, 2000, pp. 194-202.
31. LIN M., POWERS W.T., QING X., KUMAR A., DEARD S.J., "Hybrid piezoelectric/fiber optic SMART layers for Structural Health Monitoring", Structural Health Monitoring 2002, Proceedings of the First European Workshop on Structural Health Monitoring, Cachan, France, July 10-12, 2002, Lancaster, PA, DEStech Publications, Inc, pp. 641-648.
32. LIU T., FERNANDO G.F., RAO Y.J., JACKSON D. A., ZHANG L., BENNION I., "Simultaneous strain and temperature measurements using a multiplexed fiber Bragg grating sensor and an extrinsic Fabry-Perot sensor", Journal of Smart Structures and Materials, 7, 1998, pp. 550-556.
33. LIU T., FERNANDO G.F., ZHANG Z., GRATTAN K.T.V., "Simultaneous strain and temperature measurements in composites using an extrinsic Fabry-Perot sensor and a rare-earth doped fiber", Sensors and Actuators-A Physical, 80, 3, 2000, pp. 208-215.
34. MONITOR BRITE-EURAM Project No.: BE 95-1524, 1995.
35. MONTAGNA, W., RARAKKAL P.F., The Structure and Function of Skin, Academic Press, Inc., New York, 1974.
36. MOTOKU M., VALDYA U.K., JANOWSKI G.M., "Parametric studies on selfrepairing approaches for resin infused composites subjected to low velocity impact", Smart Materials and Structures, 8, 1999, pp. 623-638.
37. OTT J., O'LONE R.G., "737 fuselage separation spurs review of safeguards", Aviation Week and Space Technology, 1988, May 9, pp. 92-95.
38. PAGET C.A., GRONDEL S., LEVIN K., DELEBARRE C., "Damage detection in composite by a wavelet-coefficient technique", Structural Health Monitoring 2002, Proceedings of the First European Workshop on Structural Health Monitoring, Cachan, France, July 10-12, 2002, Lancaster, PA, DEStech Publications, Inc, pp. 313-320.
39. PICHAUD S., DEUTEUTRE X., FIT A., STEPHAN F., MAAZOUZ A., PASCAULT J.P., "Chemorheological and dielecric study of epoxy-amine for processing control", Polymer Intern., 48, 1999, pp. 1205-1218.
40. RENSON L., "Health Monitoring Systems for future reusable launchers", Structural Health Monitoring 2002, Proceedings of the First European Workshop on Structural Health Monitoring, Cachan, France, July 10-12, 2002, Lancaster, PA, DEStech Publications, Inc, pp. 65-75.
41. ROGERS C.A., Intelligent Material Systems and Structures, Report from the Center for Intelligent Material Systems and Structures, Program Div. of Technomic Publishing Co, Inc, Lancaster, PA, 1993.
42. STASZEWSKI W.J., BIEMANS C., BOLLER C., TOMLINSON G.R., "Impact damage detection in composite structures - recent advances", Structural Health Monitoring 2000, Proceedings of the Second International Workshop on Structural Health Monitoring, Stanford, CA, September 8-10, 1999, Lancaster-Basel, Technomic Publishing Co, Inc, pp. 754-763.
43. TAILLADE F., KRAPEZ J.-C., LEPOUTRE F., BALAGEAS D., "Shearographic visualization of Lamb waves in carbon epoxy plates interation with delaminations", Eur. Phys. J., AP 9, 2000, pp. 69-73.
44. TAKEDA N., "Development of structural health monitoring systems for smart composite structure systems", Proceedings of the 11th International Conference on Adaptive Structures and Technologies, Nagoya, Japan, 2000, pp. 269-276.
45. WALSH S.M., "Practical issues in the development and deployment of intelligent systems and structures", Structural Health Monitoring 2000, Proceedings of the Second International Workshop on Structural Health Monitoring, Stanford, CA, September 8-10, 1999, Lancaster-Basel, Technomic Publishing Co, Inc, pp. 553-560.
46. WALSH S.M., "A requirements-based approach to Structural Health Monitoring research, development, and application", Structural Health Monitoring 2003, from Diagnostics & Prognostics to Structural Health Management, Proceedings of the 4th International Workshop on Structural Health Monitoring, Stanford, CA, September 15- 17, 2003, Lancaster, PA, DEStech Publications, Inc, pp. 79-87.
47. WANG C.S., CHANG F.-K., "Built-in diagnostics for impact damage identification of composite structures", Structural Health Monitoring 2000, Proceedings of the Second International Workshop on Structural Health Monitoring, Stanford, CA, September 8-10, 1999, Lancaster-Basel, Technomic Publishing Co, Inc, pp. 612-621.
48. WANG M.L., SATPATHI D., HEO G., "Damage detection of a model bridge using modal testing", Structural Health Monitoring - Current Status and Perspectives, Proceedings of the First International Workshop on Structural Health Monitoring, Stanford, CA, September 18-20, 1997, Lancaster-Basel, Technomic Publishing Co, Inc, pp. 589-600.
49. YOSHIDA H., FUNAKI A., YANO S., "On the response and the responsive shape control of environmentally responsive composite with embedded Ti-Ni alloy as effectors", Proceedings of the Third International Conference on Intelligent Materials, Lyon, France, SPIE Proc. vol. 2779, 1996, Wilmington (PA), pp. 523-529.
50. ZWESCHPER T.H., DILLENZ A., BUSSE G., "Ultrasound lockin thermography - a NDT method for the inspection of aerospace structures", Proceedings of the 5th Conference on Quantitative Infrared Thermography (QIRT'2000), Reims (France), July 18-21, 2000, Lodz (Poland), Akademickie Centrum Graficzno-Marketingowe Lodart S.A., pp. 212-217.