The effect of material model in describing mechanism of plasticity-induced crack closure under variable cyclic loading

International Journal of Fracture

Volumn 143, Issue 1, 2007, Pages 15-33

  Ellyin, Fernand ^a,b   Ozah, Folarin ^a  

^a UNIVERSITY OF ALBERTA   (Canada)

^b UNIVERSITY OF BRITISH COLUMBIA   (Canada)

Author keywords

Material model; Overload; Plasticity induced crack closure; Underload

Indexed keywords

CYCLIC LOADS; MATHEMATICAL MODELS; PLASTICITY; PLATE METAL;

KINEMATIC HARDENING MODEL; PLASTICITY-INDUCED CRACK CLOSURE; TENSILE OVERLOAD;

CRACK CLOSURE;

EID: 34248562917     PISSN: 03769429     EISSN: 15732673     Source Type: Journal    
DOI: 10.1007/s10704-006-9048-z     Document Type: Article

References (29)

1. ANSYS Inc. (1997) ANSYS user's manual for revision 5.4. volume iv, theory. Houston, Philadelphia
2. Bichler C, Pippan R (1999) Direct observation of the residual plastic deformation caused by a single tensile overload. In Advances in fatigue crack closure measurement and analysis, vol. 2 of ASTM STP1343, pp 191-206, Philadelphia
3. Borrego LP, Ferreira JM, Pinho da Cruz JM (2003) Evaluation of overload effects on fatigue crack growth and closure. Eng Fract Mech 70(11):1379-1397
4. Buschermohler, H, Memhard, D, Vormwald M (1996) Fatigue crack growth acceleration or retardation due to compressive overload excursions. In Fatigue '96: Proceedings of the sixth international fatigue congress, vol. 1. pp 583-588, Berlin, Germany, 6-10 May 1996.
5. Carlson RL, Kardomateas GA (1994) Effects of compressive load excursions on fatigue crack growth. Int J Fatigue 16(2):141-146
6. Chermahini RG, Shivakumar KN, Newman JC Jr (1988) Three-dimensional finite-element simulation of fatigue crack growth and closure. In Mechanics of fatigue crack closure, ASTM STP 982, pp 398-413, Philadelphia
7. Elber W (1971) The significance of fatigue crack closure. In Damage tolerance in aircraft structure, vol. 486 of ASTM STP, pp 230-242, Philadelphia
8. Ellyin F (1997) Fatigue damage, crack growth and life prediction. Chapman & Hall, London
9. Ellyin F, Wu J (1992) Elastic-plastic analysis of a stationary crack under cyclic loading and effect of overload. Int J Fract 56:189-208
10. Ellyin F, Wu J (1999) A numerical investigation on the effect of an over-load on fatigue crack opening and closure behaviour. Fatigue Fract Eng Mater Struct 22(10):835-847
11. Ellyin F, Xia Z (1989) A rate-independent constitutive model for transient non-proportional loading. J Mech Phys Solids 37(1):71-91
12. Ellyin F, Xia Z, Wu J (1992) A new elastic-plastic constitutive model insertedintothe user-supplied material model of ADINA. Comp Struct 56:189-208
13. Hammouda MMI, Ahmad SSE, Sherbini AS, Sallam HEM (1999) Deformation behaviour at the tip of a physically short fatigue crack due to a single overload. Fatigue Fract Eng Mater Struct 22(2):145-151
14. Lemaitre J (ed) (2001) Handbook of materials behaviour models, in 3 volumes. Academic Press, San Diego, CA
15. McEvily AJ, Ishihara S (2002) On the development of crack closure at high R levels after an overload. Fatigue Fract Eng Mater Struct 25(11):993-998
16. 3p - 6061 Al composites. Acta Mater 45(8):3237-3249
17. Ozah F, Ellyin F (2006) 3d modelling of plasticity induced fatigue crack closure. (Submitted)
18. Park SJ, Song JH (1999) Simulation of fatigue crack closure behaviour under variable-amplitude loading by a 2D finite element analysis based on the most appropriate mesh size concept. In Advances in fatigue crack closure measurement and analysis, vol. 2 of ASTM STP1343, pp 337-348, Philadelphia
19. Pommier S, Bompard Ph (2000) Bauschinger effect of alloys and plasticity-induced crack closure: A finite element analysis. Fatigue Fract Eng Mater Struct 23:129-139
20. Roychowdhury S, Dodds RH Jr (2003a) A numerical investigation of 3-d small-scale yielding fatigue crack growth. Eng Fract Mech 70(17):2363-2383
21. Roychowdhury S, Dodds RH Jr (2003b) Three-dimensional effects on fatigue crack closure in the small-scale yielding regime -a finite element study. Fatigue Fract Eng Mater Struct 26:663-673
22. Skorupa M (1998) Load interaction effects during fatigue crack growth under variable amplitude loading - a literature review. Part I: Empirical trends. Fatigue Fract Eng Mater Struct 21(8):987-1006
23. Skorupa M (1999) Load interaction effects during fatigue crack growth under variable amplitude loading -a literature review. Part II: Qualitative interpretation. Fatigue Fract Eng Mater Struct 22(10):905-926
24. Solanki KN (2002) Two- and three-dimensional finite element analysis of plasticity-induced crack closure - a comprehensive parametric study. Master's thesis, Mississippi State University, Mississippi
25. Stephens RR, Stephens RI, Lemm DE (1999) Role of crack closure mechanisms on fatigue crack growth of Ti-62222 under constant-amplitude and transient loading at -54, 25, and 175°C. In Advances in fatigue crack closure measurement and analysis, vol. 2 of ASTM STP1343, pp 224-245, Philadelphia
26. k behaviour. In Mechanics of fatigue crack closure, ASTM STP 982, pp 171-185, Philadelphia
27. Wheatley G, Hu XZ, Estrin Y (1999) Effects of a single tensile overload on fatigue crack growth in 316l steel. Fatigue Fract Eng Mater Struct 22(12):1041-1051
28. Wu J, Ellyin F (1996) A study of fatigue crack closure by elastic-plastic finite element analysis for constant-amplitude loading. Int J Fract 82(1):43-65
29. Zhang JZ, Halliday MD, Bowen P et al (1999) Three dimensional elastic-plastic finite element modeling of small fatigue crack growth under a single tensile overload. Eng Fract Mech 63(3):229-251