Surface and mid-plane texture evolution in austenite phase of cold rolled austenitic stainless steels

Materials Science and Engineering: A

Volumn 457, Issue 1-2, 2007, Pages 236-245

  Kumar, B Ravi ^a   Ghosh, Mainak ^a  

^a NATIONAL METALLURGICAL LABORATORY   (India)

Author keywords

Austenitic stainless steel; Cold rolling; Texture; Texture transition

Indexed keywords

ANNEALING; COLD ROLLING; DEFORMATION; PHASE TRANSITIONS; TEXTURES;

COLD REDUCTION; TEXTURE TRANSITION;

AUSTENITIC STAINLESS STEEL;

ANNEALING; AUSTENITIC STAINLESS STEEL; COLD ROLLING; DEFORMATION; PHASE TRANSITIONS; TEXTURES;

EID: 33947692287     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2006.12.031     Document Type: Article

References (69)

1. Wever F., and Schmid W.E. Z. Metall. 22 (1930) 123
2. Pickus M.R., and Mathewson C.H. J. Inst. Met. 64 (1939) 237
3. Hibbard W.R., and Yen M.K. Trans. AIME 175 (1948) 126
4. Calnan E.A., and Clews C.J.B. Philos. Mag. 41 (1950) 1085
5. Calnan E.A., and Clews C.J.B. Philos. Mag. 42 (1951) 616
6. Grewen J., and Wassermann G. Acta Metall. 3 (1955) 354
7. Goodman S.R., and Hu H. Trans. Am. Inst. Min. Eng. 230 (1964) 1413
8. Bunge H.J., and Haessner F. J. Appl. Phys. 39 (1968) 5503
9. Perlwitz H.J., Lucke K., and Pitsch W. Acta Metall. 17 (1969) 1183
10. Bunge H.J., and Tobisch J.J. Appl. Crystallogr. 5 (1972) 27
11. Pospiech J., and Lucke K. Acta Metall. 23 (1975) 997
12. Van Houtte P. Proceedings of ICOTOM 6 (1981), The Iron and Steel Institute of Japan, Tokyo 428
13. Driver J.H., and Skalli A. Philos. Mag. 49 (1984) 505
14. Van Houtte P. Memb. Sci. Rev. Metall. 82 (1985) 57
15. Skalli A., Fortunier R., Fillit R., and Driver J.H. Acta Metall. 33 (1985) 997
16. Havner K.S., and Sue P.L. J. Mech. Phys. Solids 33 (1985) 285
17. Bacroix B., Jonas J.J., Montheillet F., and Skalli A. Acta Metall. 34 (1986) 937
18. Hirsch J., and Lucke K. In: Starke E., and Sanders Jr. T.H. (Eds). Proceedings of International Conference on Aluminum Alloys-Physical and Mechanical Properties. Charlottesville, VA (1986) 1725
19. Kohlhoff G.D., Malin A.S., Lucke K., and Hatherly M. Acta Metall. 36 (1988) 2841
20. Hirsch J., and Lucke K. Acta Metall. 36 (1988) 2863
21. Hirsch J., and Lucke K. Acta Metall. 36 (1988) 2883
22. Hirsch J., and Lucke K. Acta Metall. 36 (1988) 2905
23. Kocks U.F. In: Kallend J.S., and Gottstein G. (Eds). Proceedings of ICOTOM 8 (1988), TMS, Warrendale, PA 285
24. Fortunier R., Driver J.H., Hirsch J., and Jonas J.J. In: Kallend J.S., and Gottstein G. (Eds). Proceedings of ICOTOM 8 (1988), TMS, Warrendale, PA 319
25. Fuh S., and Havner K.S. Proc. R. Soc. Lond. A 422 (1989) 193
26. Toth L.S., Jonas J.J., and Neale K.W. Proc. R. Soc. Lond. A 427 (1909) 201
27. Haessner F. Z. Metall. 54 (1963) 98
28. Dillamore I.L., and Roberts W.T. Acta Metall. 12 (1964) 281
29. Zhou Y., Tóth L.S., and Neale K.W. Acta Metall. 40 (1992) 3179
30. Ray R.K., Jonas J.J., and Hook R.E. Int. Mater. Rev. 39 (1994) 129
31. Smallman R.E., and Green D. Acta Metall. 12 (1964) 145
32. Wasserman G. Z. Metallk. 54 (1963) 61
33. Schramm R.E., and Reed R.P. Metall. Trans. 6A (1975) 1345
34. Vercammen S., Blanpain B., Cooman B.C., and Wollants P. Acta Metall. 52 (2004) 2005
35. Goodman S.R., and Hu H. Trans. Met. Soc. AIME 233 (1965) 103
36. Yushkov Y.L., Adamescu R.A., Machnew Ye.S., Gapeka T.M., and Geld P.V. Mater. Sci. Eng. A 45 (1984) 157
37. Donadille C., Valle R., Dervin P., and Penelle R. Acta Metall. 37 (1989) 1547
38. Raabe D. Acta Metall. 45 (1997) 1137
39. Ravi Kumar B., Mahato B., Bandyopadhyay N.R., and Bhattacharya D.K. Mater. Sci. Eng. A 394 (2005) 296
40. Ravi Kumar B., Mahato B., Bandyopadhyay N.R., and Bhattacharya D.K. Metall. Mater. Trans. A 36 (2005) 3165
41. Ghosh Chodhury S., Das S., and De P.K. Acta Metall. 53 (2005) 3951
42. Schulz L.G. J. Appl. Phys. 20 (1949) 1030
43. Pawlik K., and Ozga P. LaboTex, The Texture Analysis Software. Göttinger Arbeiten zur Geologie und Paläontologie SB4 (1999)
44. Pawlik K. Phys. Status Solidi B 134 (1986) 477
45. Klassen-Neklyudova M.V. Mechanical Twinning of Crystals (1964), Consultants Bureau, New York
46. Tsakiris V., and Edmond D.V. Mater. Sci. Eng. A 237 (1999) 430
47. Lee E.H., Byun T.S., Hunn J.D., Yoo M.H., Farrell K., and Mansur I.K. Acta Metall. 49 (2001) 3269
48. Byun T.S., Lee E.H., and Hunn J.D. J. Nucl. Mater. 321 (2003) 29
49. Byun T.S. Acta Metall. 51 (2003) 3063
50. Allain S., Chateau J.-P., and Bouaziz O. Mater. Sci. Eng. A 387-389 (2004) 143
51. Allain S., Chateau J.-P., Dahmoun D., and Bouaziz O. Mater. Sci. Eng. A 387-389 (2004) 272
52. Yang P., Xie Q., Meng L., Ding H., and Tang Z. Scr. Mater. 55 (2006) 629
53. Meyers M.A., Benson D.J., Vohringer O., Kad B.K., Xue Q., and Fu H.-H. Mater. Sci. Eng. A 322 (2002) 194
54. Tadmor E.B., and Berstein N. J. Mech. Phys. Solids 52 (2004) 2507
55. Allain S., Chateau J.-P., Bouaziz O., Migot S., and Guelton N. Mater. Sci. Eng. A 387-389 (2004) 158
56. Asgari S., El-Danaf E., Kalidindi S.R., and Doherty R.D. Metall. Trans. 28A (1997) 1781
57. Karaman I., Sehitoglu H., Gall K., Chumlyakov Y.I., and Maie H.J. Acta Metall. 48 (2000) 1345
58. Meyers M.A., Vohringer O., and Lubarda V.A. Acta Metall. 49 (2001) 4025
59. van Houtte P. Acta Metall. 26 (1978) 591
60. Engler O., and Hirsch J. Z. Metallk. 86 (1995) 465
61. Dillamore I.L., and Roberts W.T. Metall. Rev. 10 (1965) 271
62. Hertzborg R.W. Deformation and Fracture Mechanics of Engineering Materials (1989), John Wiley & Sons Inc.
63. Leffers T., and Grum-Jensen. Trans. AIME 242 (1968) 314
64. Hutchinson W.B., Duggan B.J., and Haterly M. Met. Tech. 6 (1979) 398
65. Gensamer M., and Mehl R.F. Trans. AMIE 120 (1936) 277
66. Hu H., Sperry P.R., and Beck P.A. Trans. AMIE 194 (1952) 76
67. Lucke K. Z. Metallk. 45 (1954) 86
68. Regenet P.E., and Stuwe H.P. Z. Metallk. 54 (1963) 273
69. Kaland J.S., and Davis G.J. Philos. Mag. 25 (1972) 471