메뉴 건너뛰기




Volumn 18, Issue 4, 2006, Pages 239-268

A framework for capacity planning and machine configuration in flexible assembly systems

Author keywords

Capacity planning; Flexible manufacturing systems; Manufacturing system design

Indexed keywords

COST REDUCTION; OPTIMIZATION; PRODUCTION ENGINEERING; RESOURCE ALLOCATION; STRATEGIC PLANNING; SYSTEMS ANALYSIS;

EID: 33947670912     PISSN: 09206299     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10696-006-9010-4     Document Type: Article
Times cited : (11)

References (62)
  • 1
    • 0022768294 scopus 로고
    • A survey of exact algorithms for the simple assembly line balancing problem
    • Baybars I (1986) A survey of exact algorithms for the simple assembly line balancing problem. Manag Sci 32(8):909-932
    • (1986) Manag Sci , vol.32 , Issue.8 , pp. 909-932
    • Baybars, I.1
  • 2
    • 0022794511 scopus 로고
    • A branch and bound approach for machine load balancing in flexible manufacturing systems
    • Berrada M, Stecke KE (1986) A branch and bound approach for machine load balancing in flexible manufacturing systems. Manag Sci 32(10):1316-1335
    • (1986) Manag Sci , vol.32 , Issue.10 , pp. 1316-1335
    • Berrada, M.1    Stecke, K.E.2
  • 3
    • 0032379167 scopus 로고    scopus 로고
    • Intelligent decisions support system for flexible manufacturing system design
    • Borenstein D (1998a) Intelligent decisions support system for flexible manufacturing system design. Ann Oper Res 77:129-156
    • (1998) Ann Oper Res , vol.77 , pp. 129-156
    • Borenstein, D.1
  • 4
    • 0032123057 scopus 로고    scopus 로고
    • IDSSFLEX: An intelligent dss for the design and evaluation of flexible manufacturing systems
    • Borenstein D (1998b) IDSSFLEX: an intelligent dss for the design and evaluation of flexible manufacturing systems. J Oper Res Soc 49(7):734-744
    • (1998) J Oper Res Soc , vol.49 , Issue.7 , pp. 734-744
    • Borenstein, D.1
  • 5
    • 84939725201 scopus 로고
    • A queueing network approach to the module allocation problem in distributed systems
    • Bryant M, Agre JR (1981) A queueing network approach to the module allocation problem in distributed systems. Perform Eval Rev 10(3):191-204
    • (1981) Perform Eval Rev , vol.10 , Issue.3 , pp. 191-204
    • Bryant, M.1    Agre, J.R.2
  • 6
    • 0033750053 scopus 로고    scopus 로고
    • Design of flexible assembly line to minimize equipment cost
    • Bukchin J, Tzur M (2000) Design of flexible assembly line to minimize equipment cost. HE Trans 32(7):585-598
    • (2000) HE Trans , vol.32 , Issue.7 , pp. 585-598
    • Bukchin, J.1    Tzur, M.2
  • 7
    • 33947634096 scopus 로고
    • Hybrid algorithms for design optimization of asynchronous flexible assembly systems with statistical process control and repair
    • Stecke K, Suri R eds, M.I.T, Cambridge, MA, Elsevier Science Publishers B.V, Amsterdam, pp
    • Bulgak A, Sanders J (1989) Hybrid algorithms for design optimization of asynchronous flexible assembly systems with statistical process control and repair. In: Stecke K, Suri R (eds) Proceedings of the 3rd ORS A/TIMS Conf. on flexible manufacturing systems. M.I.T., Cambridge, MA, Elsevier Science Publishers B.V., Amsterdam, pp 275-280
    • (1989) Proceedings of the 3rd ORS A/TIMS Conf. on flexible manufacturing systems , pp. 275-280
    • Bulgak, A.1    Sanders, J.2
  • 8
    • 0022757590 scopus 로고
    • Flexible manufacturing systems: A review of analytical models
    • Buzacott JA, Yao DD (1986) Flexible manufacturing systems: a review of analytical models. Manag Sci 32(7):890-905
    • (1986) Manag Sci , vol.32 , Issue.7 , pp. 890-905
    • Buzacott, J.A.1    Yao, D.D.2
  • 9
    • 0033907504 scopus 로고    scopus 로고
    • The development of intelligent decision support tools to aid the design of flexible manufacturing systems
    • Chan FTS, Jiang B, Tang NKH (2000) The development of intelligent decision support tools to aid the design of flexible manufacturing systems. Int J Product Econ 65(1):73-84
    • (2000) Int J Product Econ , vol.65 , Issue.1 , pp. 73-84
    • Chan, F.T.S.1    Jiang, B.2    Tang, N.K.H.3
  • 10
    • 0003432446 scopus 로고
    • An efficient method to determine the optimal configuration of a flexible manufacturing system
    • Stecke K, Suri R eds, Ann Arbor, MI, Elsevier Science Publishers B.V, Amsterdam, pp
    • Dallery Y, Frein Y (1986) An efficient method to determine the optimal configuration of a flexible manufacturing system. In: Stecke K, Suri R (eds) Proceedings of the 2nd ORSA/TIMS Conf. on flexible manufacturing systems. Ann Arbor, MI, Elsevier Science Publishers B.V., Amsterdam, pp 269-282
    • (1986) Proceedings of the 2nd ORSA/TIMS Conf. on flexible manufacturing systems , pp. 269-282
    • Dallery, Y.1    Frein, Y.2
  • 11
    • 0025457839 scopus 로고
    • On the optimal allocation of servers and workloads in closed queueing networks
    • Dallery Y, Stecke KE (1990) On the optimal allocation of servers and workloads in closed queueing networks. Oper Res 38(4):694-703
    • (1990) Oper Res , vol.38 , Issue.4 , pp. 694-703
    • Dallery, Y.1    Stecke, K.E.2
  • 12
    • 0026905256 scopus 로고
    • Modern tools for the design, modeling and evaluation of flexible manufacturing systems
    • Elmaraghy HA, Ravi T (1992) Modern tools for the design, modeling and evaluation of flexible manufacturing systems. Robot Comput Integr Manuf 9(4-5):335-340
    • (1992) Robot Comput Integr Manuf , vol.9 , Issue.4-5 , pp. 335-340
    • Elmaraghy, H.A.1    Ravi, T.2
  • 13
    • 0026849728 scopus 로고
    • Modelling tools for flexible manufacturing systems
    • Evans GW, Haddock J (1992) Modelling tools for flexible manufacturing systems. Prod Plan Control 3(2):158-167
    • (1992) Prod Plan Control , vol.3 , Issue.2 , pp. 158-167
    • Evans, G.W.1    Haddock, J.2
  • 14
    • 0001167316 scopus 로고
    • Closed queueing networks with exponential servers
    • Gordon WJ, Newell GF (1967) Closed queueing networks with exponential servers. Oper Res 15(2):252-267
    • (1967) Oper Res , vol.15 , Issue.2 , pp. 252-267
    • Gordon, W.J.1    Newell, G.F.2
  • 15
    • 0002117744 scopus 로고
    • Equipment selection and task assignment for multiproduct assembly system design
    • Graves SC, Redfield CH (1988) Equipment selection and task assignment for multiproduct assembly system design. Int J Flex Manuf Syst 1(1):31-50
    • (1988) Int J Flex Manuf Syst , vol.1 , Issue.1 , pp. 31-50
    • Graves, S.C.1    Redfield, C.H.2
  • 16
    • 0035482386 scopus 로고    scopus 로고
    • A review of different approaches to the FMS loading problem
    • Grieco A, Semeraro Q, Tolio T (2001) A review of different approaches to the FMS loading problem. Int J Flex Manuf Syst 13(4):361-384
    • (2001) Int J Flex Manuf Syst , vol.13 , Issue.4 , pp. 361-384
    • Grieco, A.1    Semeraro, Q.2    Tolio, T.3
  • 18
    • 0027904991 scopus 로고    scopus 로고
    • Gunasekaran A, Martikainen T, Yli-Olli P (1993) Flexible manufacturing systems: an investigation for research and applications. Eur J Oper Res 66(1):l-26
    • Gunasekaran A, Martikainen T, Yli-Olli P (1993) Flexible manufacturing systems: an investigation for research and applications. Eur J Oper Res 66(1):l-26
  • 19
    • 33746073330 scopus 로고
    • A simulation generator for flexible manufacturing systems - design and control
    • Haddock J (1988) A simulation generator for flexible manufacturing systems - design and control. HE Trans 20(1):22-31
    • (1988) HE Trans , vol.20 , Issue.1 , pp. 22-31
    • Haddock, J.1
  • 20
    • 0023963644 scopus 로고
    • Optimally balancing large assembly lines with FABLE
    • Johnson RV (1988) Optimally balancing large assembly lines with FABLE. Manag Sci 34(2):240-253
    • (1988) Manag Sci , vol.34 , Issue.2 , pp. 240-253
    • Johnson, R.V.1
  • 22
    • 0027543720 scopus 로고
    • A study on surrogate objectives for loading a certain type of flexible manufacturing systems
    • Kim YD (1993) A study on surrogate objectives for loading a certain type of flexible manufacturing systems. Int J Prod Res 31(2):381-392
    • (1993) Int J Prod Res , vol.31 , Issue.2 , pp. 381-392
    • Kim, Y.D.1
  • 23
    • 0027342202 scopus 로고
    • A heuristic approach for loading problems in flexible manufacturing systems
    • Kim Y-D, Yano CA (1993) A heuristic approach for loading problems in flexible manufacturing systems. HE Trans 25(1):26-39
    • (1993) HE Trans , vol.25 , Issue.1 , pp. 26-39
    • Kim, Y.-D.1    Yano, C.A.2
  • 24
    • 0024607422 scopus 로고
    • An integrated simulation approach to design of flexible manufacturing systems
    • Kiran AS, Schloffer A, Hawkins D (1989) An integrated simulation approach to design of flexible manufacturing systems. Simulation 52(2):47-52
    • (1989) Simulation , vol.52 , Issue.2 , pp. 47-52
    • Kiran, A.S.1    Schloffer, A.2    Hawkins, D.3
  • 25
    • 0002297060 scopus 로고
    • Design and planning problems in flexible manufacturing systems - a critical review
    • Kouvelis P (1992) Design and planning problems in flexible manufacturing systems - a critical review. J Intell Manuf 3(2):75-99
    • (1992) J Intell Manuf , vol.3 , Issue.2 , pp. 75-99
    • Kouvelis, P.1
  • 27
    • 33746090093 scopus 로고
    • PhD dissertation, Department of Industrial and Operations Engineering. The University of Michigan, Ann Arbor, MI
    • Lee HF (1989) A methodology for capacity planning in flexible assembly systems. PhD dissertation, Department of Industrial and Operations Engineering. The University of Michigan, Ann Arbor, MI
    • (1989) A methodology for capacity planning in flexible assembly systems
    • Lee, H.F.1
  • 28
    • 0033640418 scopus 로고    scopus 로고
    • Loading algorithms for flexible manufacturing systems with partially grouped machines
    • Lee DH, Kim YD (2000) Loading algorithms for flexible manufacturing systems with partially grouped machines. HE Trans 32(1):33-47
    • (2000) HE Trans , vol.32 , Issue.1 , pp. 33-47
    • Lee, D.H.1    Kim, Y.D.2
  • 29
    • 0032311637 scopus 로고    scopus 로고
    • Decomposition algorithms for the maximum-weight connected graph problem
    • Lee HF, Dooly DR (1998) Decomposition algorithms for the maximum-weight connected graph problem. Naval Res Logistics 45(8):817-837
    • (1998) Naval Res Logistics , vol.45 , Issue.8 , pp. 817-837
    • Lee, H.F.1    Dooly, D.R.2
  • 30
    • 0001846124 scopus 로고
    • A balancing strategy for designing flexible assembly systems
    • Lee HF, Johnson RV (1991) A balancing strategy for designing flexible assembly systems. Int J Flex Manuf Syst 3(2):91-120
    • (1991) Int J Flex Manuf Syst , vol.3 , Issue.2 , pp. 91-120
    • Lee, H.F.1    Johnson, R.V.2
  • 31
    • 0041536004 scopus 로고
    • The optimal configuration and workload allocation problem in flexible manufacturing systems
    • Lee HF, Srinivasan MM, Yano CA (1991a) The optimal configuration and workload allocation problem in flexible manufacturing systems. Int J Flex Manuf Syst 3(3):213-230
    • (1991) Int J Flex Manuf Syst , vol.3 , Issue.3 , pp. 213-230
    • Lee, H.F.1    Srinivasan, M.M.2    Yano, C.A.3
  • 32
    • 0043032637 scopus 로고
    • Characteristics of optimal workload allocation in closed queueing networks
    • Lee HF, Srinivasan MM, Yano CA (1991b) Characteristics of optimal workload allocation in closed queueing networks. Perfor Eval 12(4):255-268
    • (1991) Perfor Eval , vol.12 , Issue.4 , pp. 255-268
    • Lee, H.F.1    Srinivasan, M.M.2    Yano, C.A.3
  • 33
    • 0002965016 scopus 로고    scopus 로고
    • An integrated design support method for flexible assembly systems
    • Lee HF, Stecke KE (1996) An integrated design support method for flexible assembly systems. J Manuf Syst 15(1):13-32
    • (1996) J Manuf Syst , vol.15 , Issue.1 , pp. 13-32
    • Lee, H.F.1    Stecke, K.E.2
  • 34
    • 0032116504 scopus 로고    scopus 로고
    • Production planning for flexible flow systems with limited machine flexibility
    • Lee HF, Stecke KE (1998) Production planning for flexible flow systems with limited machine flexibility. HE Trans 30(7):669-684
    • (1998) HE Trans , vol.30 , Issue.7 , pp. 669-684
    • Lee, H.F.1    Stecke, K.E.2
  • 35
    • 0031698542 scopus 로고    scopus 로고
    • Capacity planning for phased implementation of flexible manufacturing systems under budget restrictions
    • Lim SK, Kim YD (1998) Capacity planning for phased implementation of flexible manufacturing systems under budget restrictions. Eur J Oper Res 104(1):175-186
    • (1998) Eur J Oper Res , vol.104 , Issue.1 , pp. 175-186
    • Lim, S.K.1    Kim, Y.D.2
  • 36
    • 0009350139 scopus 로고
    • Stochastic design optimization of asynchronous flexible assembly systems
    • Liu C, Sanders J (1988) Stochastic design optimization of asynchronous flexible assembly systems. Ann Oper Res 15:131-154
    • (1988) Ann Oper Res , vol.15 , pp. 131-154
    • Liu, C.1    Sanders, J.2
  • 37
    • 0000142737 scopus 로고
    • FMS designer - an expert system for flexible manufacturing systems
    • Mellichamp JJ, Kwon OJ, Wahab AFA (1990) FMS designer - an expert system for flexible manufacturing systems. Int J Prod Res 28(11):2013-2024
    • (1990) Int J Prod Res , vol.28 , Issue.11 , pp. 2013-2024
    • Mellichamp, J.J.1    Kwon, O.J.2    Wahab, A.F.A.3
  • 39
    • 0032631424 scopus 로고    scopus 로고
    • Strategic configuration of flexible asembly systems: A single period approximation
    • Peters BA, McGinnis LF (1999) Strategic configuration of flexible asembly systems: a single period approximation. HE Trans 31(4):379-390
    • (1999) HE Trans , vol.31 , Issue.4 , pp. 379-390
    • Peters, B.A.1    McGinnis, L.F.2
  • 40
    • 0030153335 scopus 로고    scopus 로고
    • Intelligent decision support for flexible manufacturing: Design and implementation of a knowledge-based simulator. OMEGA - Int
    • Pflughoeft KA, Hutchinson GK, Nazareth DL (1996) Intelligent decision support for flexible manufacturing: design and implementation of a knowledge-based simulator. OMEGA - Int J Manag Sci 24(3):347-360
    • (1996) J Manag Sci , vol.24 , Issue.3 , pp. 347-360
    • Pflughoeft, K.A.1    Hutchinson, G.K.2    Nazareth, D.L.3
  • 43
    • 0018999918 scopus 로고
    • Mean value analysis of closed multichain queueing networks
    • Reiser M, Lavenberg SS (1980) Mean value analysis of closed multichain queueing networks. J Assoc Comput Machin 27(2):313-320
    • (1980) J Assoc Comput Machin , vol.27 , Issue.2 , pp. 313-320
    • Reiser, M.1    Lavenberg, S.S.2
  • 44
    • 0036793631 scopus 로고    scopus 로고
    • Robust design of flexible manufacturing systems using colored Petri Net and genetic algoithm
    • Saitou KS, Malpathak, Qvam H (2002) Robust design of flexible manufacturing systems using colored Petri Net and genetic algoithm. J Intell Manuf 13(5):339-351
    • (2002) J Intell Manuf , vol.13 , Issue.5 , pp. 339-351
    • Saitou, K.S.1
  • 45
    • 0022962049 scopus 로고
    • Decision support in design and optimization of flexible automated manufacturing and assembly
    • Seliger G, Wiehweger B, Wieneke B (1987) Decision support in design and optimization of flexible automated manufacturing and assembly. Robot Comput Integr Manuf 3(2):221-227
    • (1987) Robot Comput Integr Manuf , vol.3 , Issue.2 , pp. 221-227
    • Seliger, G.1    Wiehweger, B.2    Wieneke, B.3
  • 46
    • 0022766236 scopus 로고
    • Reducing work-in-process inventory in certain classes of flexible manufacturing systems
    • Shanthikumar JG, Stecke KE (1986) Reducing work-in-process inventory in certain classes of flexible manufacturing systems. Eur J Oper Res 26(2):266-271
    • (1986) Eur J Oper Res , vol.26 , Issue.2 , pp. 266-271
    • Shanthikumar, J.G.1    Stecke, K.E.2
  • 47
    • 0023411524 scopus 로고
    • Optimal server allocation in a system of multi-server stations
    • Shanthikumar JG, Yao DD (1987) Optimal server allocation in a system of multi-server stations. Manag Sci 33(9):1173-1180
    • (1987) Manag Sci , vol.33 , Issue.9 , pp. 1173-1180
    • Shanthikumar, J.G.1    Yao, D.D.2
  • 48
    • 0023981191 scopus 로고
    • On server allocation in multiple center manufacturing systems
    • Shanthikumar JG, Yao DD (1988a) On server allocation in multiple center manufacturing systems. Oper Res 36(2):333-342
    • (1988) Oper Res , vol.36 , Issue.2 , pp. 333-342
    • Shanthikumar, J.G.1    Yao, D.D.2
  • 49
    • 0011523716 scopus 로고
    • Second-order properties of the throughput of a closed queueing network
    • Shanthikumar JG, Yao DD (1988b) Second-order properties of the throughput of a closed queueing network. Math Oper Res 13(3):524-534
    • (1988) Math Oper Res , vol.13 , Issue.3 , pp. 524-534
    • Shanthikumar, J.G.1    Yao, D.D.2
  • 50
    • 0024108336 scopus 로고
    • Throughput bounds for closed queueing networks with queuedependent service rates
    • Shanthikumar JG, Yao DD (1988c) Throughput bounds for closed queueing networks with queuedependent service rates. Perf Eval 9(1):69-78
    • (1988) Perf Eval , vol.9 , Issue.1 , pp. 69-78
    • Shanthikumar, J.G.1    Yao, D.D.2
  • 51
    • 0242301603 scopus 로고    scopus 로고
    • Configuring flexible flow lines
    • Sodhi MS, Sarker BR (2003) Configuring flexible flow lines. Int J Prod Res 41(8):1689-1706
    • (2003) Int J Prod Res , vol.41 , Issue.8 , pp. 1689-1706
    • Sodhi, M.S.1    Sarker, B.R.2
  • 52
    • 0028468444 scopus 로고
    • Analytical models for FMS design optimization: A survey
    • Solot P, van Vliet M (1994) Analytical models for FMS design optimization: a survey. Int J Flex Manuf Syst 6(3):209-233
    • (1994) Int J Flex Manuf Syst , vol.6 , Issue.3 , pp. 209-233
    • Solot, P.1    van Vliet, M.2
  • 53
    • 0022917134 scopus 로고
    • On the nonconcavity of throughput in certain closed queueing networks
    • Stecke KE (1986) On the nonconcavity of throughput in certain closed queueing networks. Perf Eval 6(4):293-305
    • (1986) Perf Eval , vol.6 , Issue.4 , pp. 293-305
    • Stecke, K.E.1
  • 54
    • 0022097833 scopus 로고
    • The optimality of unbalancing both workloads and machine group sizes in closed queueing networks of multi-server queues
    • Stecke KE, Solberg JJ (1985) The optimality of unbalancing both workloads and machine group sizes in closed queueing networks of multi-server queues. Oper Res 33(4):882-910
    • (1985) Oper Res , vol.33 , Issue.4 , pp. 882-910
    • Stecke, K.E.1    Solberg, J.J.2
  • 55
    • 0022062355 scopus 로고
    • A concept of monotonicity and its characterization for closed queueing networks
    • Suri R (1985) A concept of monotonicity and its characterization for closed queueing networks. Oper Res 33(3):606-624
    • (1985) Oper Res , vol.33 , Issue.3 , pp. 606-624
    • Suri, R.1
  • 57
    • 84976794376 scopus 로고
    • Optimal selection of CPU speed, device capacities, and file assignments
    • Trivedi KS, Wagner RA, Sigmon TM (1980) Optimal selection of CPU speed, device capacities, and file assignments. J Assoc Comput Machin 27(3):457-473
    • (1980) J Assoc Comput Machin , vol.27 , Issue.3 , pp. 457-473
    • Trivedi, K.S.1    Wagner, R.A.2    Sigmon, T.M.3
  • 59
    • 0029293564 scopus 로고
    • A model for the minimum cost configuration problem in flexible manufacturing systems
    • Tetzlaff UAW (1995) A model for the minimum cost configuration problem in flexible manufacturing systems. Int J Flex Manuf Syst 7(2):127-146
    • (1995) Int J Flex Manuf Syst , vol.7 , Issue.2 , pp. 127-146
    • Tetzlaff, U.A.W.1
  • 60
    • 0022162245 scopus 로고
    • The optimal design of flexible manufacturing systems
    • Vinod B, Solberg J (1985) The optimal design of flexible manufacturing systems. Int J Prod Res 23(6):1141-1151
    • (1985) Int J Prod Res , vol.23 , Issue.6 , pp. 1141-1151
    • Vinod, B.1    Solberg, J.2
  • 61
    • 0031677329 scopus 로고    scopus 로고
    • Assembly system design: A branch and cut approach
    • Wilhelm W, Pinnoi A (1998) Assembly system design: a branch and cut approach. Manag Sci 44(1):103-118
    • (1998) Manag Sci , vol.44 , Issue.1 , pp. 103-118
    • Wilhelm, W.1    Pinnoi, A.2
  • 62
    • 0023292422 scopus 로고
    • Some order relations in closed networks of queues with multiserver stations
    • Yao DD, Kim SC (1987) Some order relations in closed networks of queues with multiserver stations. Naval Res Logistics 34(1):53-66
    • (1987) Naval Res Logistics , vol.34 , Issue.1 , pp. 53-66
    • Yao, D.D.1    Kim, S.C.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.