Experimental validation of the heat and mass transfer model for convective drying

Drying Technology

Volumn 25, Issue 1, 2007, Pages 107-121

  Kowalski, S J ^a   Musielak, G ^a   Banaszak, J ^a  

^a POZNAN UNIVERSITY OF TECHNOLOGY   (Poland)

Author keywords

Convective drying; Heat and mass transfer; Model validation; Nonlinear model; Numerical simulations

Indexed keywords

BOUNDARY CONDITIONS; COMPUTER SIMULATION; HEAT CONVECTION; MASS TRANSFER; MATHEMATICAL MODELS; THERMAL EFFECTS;

CONVECTIVE DRYING; MODEL VALIDATION;

DRYING;

BOUNDARY CONDITIONS; COMPUTER SIMULATION; DRYING; HEAT CONVECTION; MASS TRANSFER; MATHEMATICAL MODELS; THERMAL EFFECTS;

EID: 33847666039     PISSN: 07373937     EISSN: 15322300     Source Type: Journal    
DOI: 10.1080/07373930601160940     Document Type: Article

References (33)

1. Perré, P. and Passard, J. (2004) A physical and mechanical model able to predict the stress field in wood over a wide range of drying conditions. Drying Technology, 22:12, pp. 27-44.
2. Gong, Z. X., Mujumdar, A. S., Itaya, Y., Mori, S. and Hasatani, M. (1998) Drying of clay and nonclay media: Heat and mass transfer and quality aspects. Drying Technology, 16:6, pp. 1119-1152.
3. Hasatani, M., Itaya, Y. and Hayakawa, K. (1992) Fundamental study on shrinkage of formed clay during drying. Drying Technology, 10:4, pp. 1013-1036.
4. Katekawa, M. E. and Silva, M. A. (2006) A review of drying models including shrinkage effects. Drying Technology, 24:1, pp. 5-20.
5. Kowalski, S. J. (1994) Thermomechanics of drying process of fluid-saturated porous media. Drying Technology, 12:4, pp. 453-482.
6. Kowalski, S. J. (1996) Mathematical modelling of shrinkage by drying. Drying Technology, 14:2, pp. 307-331.
7. Green, A. E. and Naghdi, P. M. (1969) On basic equations for moistures. Quarterly Journal of Mechanics & Applied Mathematics, 22, pp. 427-340.
8. Bedford, A. and Drumheller, D. S. (1983) Theories of immiscible and structured mixtures. International Journal of Engineering Science, 21:8, pp. 863-960.
9. Bowen, R. M. (1892) Compressible porous media models by use of the theory of mixtures. International Journal of Engineering Science, 20:6, pp. 697-735.
10. Cairncross, R. A., Schunk, P. R., Chen, K. S., Prakash, S. S., Samuel, J., Hurt, A. J. and Brinker, C. J. (1996)
11. Moeckel, G. P. (1974) Thermodynamics of an interface. Archive for Rational Mechanics and Analysis, 53, pp. 255-280.
12. Kowalski, S. J. (1997) Moisture transport in dried materials. Boundary conditions. Chemical Engineering Science, 40:7, pp. 1141-1150.
13. Kneule, F. (1970) Drying;, Arkady-Warszawa
14. Musielak, G. (2004) Modelling of the heat and mass transport phenomena in kaolin during the first and the second periods of drying. Chemical and Process Engineering, 25, pp. 393-409.
15. Musielak, G. and Banaszak, J. (2007) Non-linear heat and mass transfer during convective drying of kaolin cylinder under non-steady conditions. Transport in Porous Media, 66:1
16. Szarawara, J. (1985) Chemical Thermodynamics;, WNT, Warszawa
17. Kowalski, S. J. (2003) Thermomechanics of Drying Processes;, Springer Verlag, Heilderberg-Berlin
18. Musielak, G. (1899) Modelling and Numerical Simulation of the Transport Phenomena and the Drying Induced Stresses inside of the Capillary - Porous Materials
19. Musielak, G. (1991) Numerical example for drying model including phase change. Studia Geotechnica et Mechanica, 13:3, pp. 45-59.
20. Musielak, G. (1996) Internal stresses caused by outflow of moisture and phase change inside dried materials. Drying Technology, 14:2, pp. 289-306.
21. Kowalski, S. J. and Rybicki, A. (2007) Numerical identification of the vapor-liquid interface in a dried body. Transport in Porous Media, 66, pp. 1-2.
22. Surmin, Kaolin (1899)
23. Musielak, G., Banaszak, J. and Kasperek, J. (2005) Determination of Temperature Dependence of Diffusion Coefficient in Fully Saturated Kaolin;. Proceedings of the 11th Polish Drying Symposium XI PSS, pp. 13-16.
24. Banaszak, J. (2005) Estimation of the Effective Coefficient of Heat Conduction for Dried Materials. Proceedings of the 11th Polish Drying Symposium XI PSS, pp. 13-16.
25. Augier, F., Coumans, W. J., Hugget, A. and Kaasschieter, E. F. (2002) On the risk of cracking in clay drying. Chemical Engineering Journal, 86, pp. 133-138.
26. Banaszak, J. and Kowalski, S. J. (1999) Stresses in viscoelastic plate dried convectively. Drying Technology, 17:12, pp. 97-117.
27. Itaya, Y., Mabuchi, S. and Hasatani, M. (1995) Deformation behavior of ceramic slabs by nonuniform drying. Drying Technology, 13:3, pp. 801-819.
28. Ketelaars, A. A. J. (1992) Drying Deformable Media. Kinetics, Shrinkage and Stresses;, Technische Universiteit, Eindhoven
29. Comini, G. and Lewis, R. W. (1976) A numerical solution of two-dimensional problems involving heat and mass transfer. International Journal of Heat and Mass Transfer, 19, pp. 1387-1392.
30. Pikoń, J., Hehlmann, J., Sa̧siadek, B. and Janowicz, R. (1972) Chemical Apparatus;, Wydawnictwo Politechniki Śa̧skiej, Silesian Technical University-Gliwice, Gliwice
31. Strumiłło, Cz. (1983) Foundations of Theory and Technology of Drying, WNT-Warszawa, Warsaw
32. Wiśniewski, S. and Wiśniewski, T. S. (1997) Heat Exchange, WNT-Warszawa, Warsaw
33. Musielak, G. (2005) Numerical Treatment of Non-Linear Boundary Condition of Mass Transfer during Second Period of Drying;. Proceedings of the 11th Polish Drying Symposium XI PSS, pp. 13-16.