Analytical relations between hardness and strain for cold formed parts

Journal of Materials Processing Technology

Volumn 186, Issue 1-3, 2007, Pages 163-173

  Sonmez, Fazil O ^a   Demir, Ahmet ^a  

^a BOGAZICI UNIVERSITY   (Turkey)

Author keywords

Brinell hardness; Cold forming; Effective strain; Flow curve; Steels; Vickers hardness

Indexed keywords

BRINELL HARDNESS TESTING; INDENTATION; MATHEMATICAL MODELS; PLASTICS; STEEL; STRAIN; VICKERS HARDNESS TESTING;

COLD FORMED PARTS; EFFECTIVE STRAIN; FLOW CURVE; HARDNESS DISTRIBUTION;

COLD WORKING;

EID: 33847283325     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2006.12.031     Document Type: Article

References (61)

1. Kim H., Lee S.-M., and Altan T. Prediction of hardness distribution in cold backward extruded cups. J. Mater. Process. Technol. 59 (1996) 113-121
2. Gouveia B.P.P.A., Rodrigues J.M.C., and Martins P.A.F. Steady state finite-element analysis of cold forward extrusion. J. Mater. Process. Technol. 73 (1998) 281-288
3. Gouveia B.P.P.A., Rodrigues J.M.C., and Martins P.A.F. Finite element modeling of cold forward extrusion and combined Eulerian-Lagrangian formulations. J. Mater. Process. Technol. 80-81 (1998) 647-652
4. Petruska J., and Janicek L. On the evaluation of strain inhomogeneity by hardness measurement of formed products. J. Mater. Process. Technol. 143-144 (2003) 300-305
5. Ruminski M., Luksza J., Kusiak J., and Packo M. Analysis of the effect of die shape on the distribution of mechanical properties and strain field in the tube sinking process. J. Mater. Process. Technol. 80-81 (1998) 683-689
6. Choi Y., Park J.H., Kim B.M., Choi J.C., and Min B.H. Estimation of relation between effective strain and hardness by rigid-plastic FEM. Met. Mater. 6 2 (2000) 111-116
7. Tekkaya A.E. Improved relationship between Vickers hardness and yield stress for cold formed materials. Steel Res. 72 8 (2001) 304-310
8. Boyer H.E. Hardness Testing (1987), ASM International, USA
9. Tabor D. The Hardness of Metals (1951), Clarendon Press, New York
10. Tabor D. Indentation hardness: fifty years on, a personal view. Philos. Mag. A 74 5 (1996) 1207-1212
11. Tabor D. A simple theory of static and dynamic hardness. Proc. R. Soc. Lond. Ser.A, Math. Phys. Sci. 192 1029 (1948) 247-274
12. Tirupataiah Y., and Sundararajan G. On the constraint factor associated with the indentation of work-hardening materials with a spherical ball. Metall. Trans. A 22 (1991) 2375-2384
13. Chaudhri M.M. Subsurface plastic strain distribution around spherical indentations in metals. Philos. Mag. A 74 5 (1996) 1213-1224
14. Timoshenko S., and Goodier J.N. Theory of Elasticity (1951), McGraw-Hill
15. Sinclair G.B., Follansbee P.S., and Johnson K.L. Quasi-static normal indentation of an elasto-plastic half space by a rigid sphere-II results. Int. J. Solids Struct. 21 8 (1985) 865-888
16. Francis H.A. Phenomenological analysis of plastic spherical indentation. Trans. ASME; J. Eng. Mater. Technol. 98 (1976) 272-281
17. Chen W.F., and Han D.J. Plasticity for Structural Engineers (1988), Springer-Verlag, New York
18. Singh A.P., Padmanabhan K.A., Pandey G.N., Murty G.M.D., and Jha S. Strength differential effect in four commercial steels. J. Mater. Sci. 35 (2000) 1379-1388
19. Richmond O., Morrison H.L., and Devenpeck M.L. Sphere indentation with application to the Brinell hardness test. Int. J. Mech. Sci. 16 (1974) 75-82
20. Biwa S., and Storakers B. An analysis of fully plastic Brinell indentation. J. Mech. Phys. Solids 43 8 (1995) 1303-1333
21. Matthews J.R. Indentation hardness and hot pressing. Acta Metall. 28 (1980) 311-318
22. Follansbee P.S., and Sinclair G.B. Quasi-static normal indentation of an elasto-plastic half-space by a rigid sphere-I. Analysis. Int. J. Solids Struct. 20 (1984) 81-91
23. Edlinger M.L., Gratacos P., Montmitonnet P., and Felder E. Finite element analysis of elastoplastic indentation with a deformable indenter. Eur. J. Mech. A/Solids 12 5 (1993) 679-698
24. Guyot N., Kosior F., and Maurice G. Numerical study of the Brinell hardness test of elastoplastic indentation. ZAMM Z. Angew. Math. Mech. 80 8 (2000) 555-563
25. Hill R., Storakers B., and Zdunek A.B. A theoretical study of the Brinell hardness test. Proc. R. Soc. Lond. A 423 (1989) 301-330
26. Mesarovic S., and Fleck N.A. Spherical indentation of elastic-plastic solids. Proc. R. Soc. Lond. 455 (1999) 2707-2728
27. Chaudri M.M. Strain hardening around spherical indentations. Phys. Status Solidi (a) 182 2 (2000) 641-652
28. Taljat B., Zacharia T., and Kosel F. New analytical procedure to determine stress-strain curve from spherical indentation data. Int. J. Solids Struct. 35 33 (1998) 4411-4426
29. Tirupataiah Y., and Sundararajan G. A comprehensive analysis of the static indentation process. Mater. Sci. Eng. 91 (1987) 169-180
30. Ahn J.-H., and Kwon D. Derivation of plastic-stress relationship from ball indentations: examination of strain definition and pileup effect. J. Mater. Res. 16 11 (2001) 3170-3178
31. Larsson P.-L. Investigation of sharp contact at rigid-plastic conditions. Int. J. Mech. Sci. 43 (2001) 895-920
32. Jayaraman S., Hahn G.T., Oliver W.C., and Rubin C.A. Determination of monotonic stress-strain curve of hard materials from ultra-low-load indentation tests. Int. J. Solids Struct. 35 5-6 (1998) 365-381
33. Johnson K.L. The correlation of indentation experiments. J. Mech. Phys. Solids 18 (1970) 115-126
34. Marsh D.M. Plastic flow in glass. Proc. R. Soc. Lond. A 279 (1964) 420-435
35. Hill R. The Mathematical Theory of Elasticity (1950), Clarendon Press, Oxford
36. Studman C.J., Moore M.A., and Jones S.E. On the correlation of indentation experiments. J. Phys. D: Appl. Phys. 10 (1977) 949-956
37. Giannakopoulos A.E., Larsson P.-L., and Vestergaard R. Analysis of Vickers indentation. Int. J. Solids Struct. 31 19 (1994) 2679-2708
38. Mata M., Anglada M., and Alcala J. A hardness equation for sharp indentation of elastic-power-law strain-hardening materials. Philos. Mag. A 82 10 (2002) 1831-1839
39. Mata M., and Alcala J. Mechanical property evaluation through sharp indentations in elastoplastic and fully plastic contact regimes. J. Mater. Res. 18 7 (2003) 1705-1709
40. Mata M., and Alcala J. The role of friction on sharp indentation. J. Mech. Phys. Solids 52 (2004) 145-165
41. Cheng Y.-T., and Li Z. Hardness obtained from conical indentations with various cone angles. J. Mater. Res. 15 12 (2000) 2830-2835
42. Cheng Y.-T., and Cheng C.-M. What is indentation hardness?. Surf. Coat. Technol. 133-134 (2000) 417-424
43. Cheng Y.-T., and Cheng C.-M. Scaling, dimensional analysis, and indentation measurements. Mater. Sci. Eng. R 44 (2004) 91-149
44. Li Z., Cheng Y.-T., Yang H.T., and Chandrasekar S. On two indentation hardness definitions. Surf. Coat. Technol. 154 (2002) 124-130
45. Bolshakov A., and Pharr G.M. Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques. J. Mater. Res. 13 4 (1998) 1049-1058
46. Dao M., Chollacoop N., Van Vliet K.J., Venkatesh T.A., and Suresh S. Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Mater. 49 (2001) 3899-3918
47. Chollacoop N., Dao M., and Suresh S. Depth-sensing instrumented indentation with dual sharp indenters. Acta Mater. 51 (2003) 3713-3729
48. Bucaille J.L., Stauss S., Felder E., and Michler J. Determination of plastic properties of metals by instrumented indentation using different sharp indenters. Acta Mater. 51 (2003) 1663-1678
49. Casals O., and Alcala J. The duality in mechanical property extractions from Vickers and Berkovich instrumented indentation experiments. Acta Mater. 53 (2005) 3545-3561
50. Kumar D.R. Formability analysis of extra-deep drawing steel. J. Mater. Process. Technol. 130-131 (2002) 31-41 and personal communication
51. Nayebi A., El Abdi R., Bartier O., and Mauvoisin G. New procedure to determine steel mechanical properties from the spherical indentation technique. Mech. Mater. 34 (2002) 243-254
52. Murakami Y., and Matsuda K. Analysis of Vickers hardness by finite element method. Trans. ASME; J. Appl. Mech. 61 (1994) 822-828
53. Rajan K.M., Deshpande P.U., and Narasimhan K. Effect of heat treatment of preform on the mechanical properties of flow formed AISI 4130 steel tubes-a theoretical and experimental assessment. J. Mater. Process. Technol. 125-126 (2002) 503-511
54. Alcala J., Barone A.C., and Anglada M. The influence of plastic hardening on surface deformation modes around Vickers and spherical indents. Acta Mater. 48 (2000) 3451-3464
55. Dowling N.E. Mechanical Behavior of Materials: Engineering Methods for Deformation Fracture and Fatigue (1999), Prentice Hall, NJ
56. Carlsson S., and Larsson P.-L. On the determination of residual stress and strain fields by sharp indentation testing. Part II. Experimental investigation. Acta Mater. 49 (2001) 2193-2203
57. Milan M.T., Spinelli D., Bose Filho W.W., Montezuma M.F.V., and Tita V. Failure analysis of a SAE 4340 steel locking bolt. Eng. Fail. Anal. 11 6 (2004) 915-924
58. Matsuda K. Prediction of stress-strain curves of elastic-plastic materials based on Vickers indentation. Philos. Mag. A 82 10 (2002) 1941-1951
59. Oberg E., Jones F.D., and Horton H.L. Machinery's Handbook. 21st ed. (1979), Industrial Press Inc., New York
60. A. Demir, 2001. Prediction of Brinell hardness distribution in cold formed parts, MS thesis, Bogazici University, Istanbul.
61. Demir A., and Sonmez F.O. Prediction of Brinell hardness distribution in cold formed parts. Trans. ASME; J. Eng. Mater. Technol. 126 (2004) 398-405