An experimental methodology to quantify the spray cooling event at intermittent spray impact

International Journal of Heat and Fluid Flow

Volumn 28, Issue 2, 2007, Pages 191-202

  Moreira, António L N ^a   Carvalho, João ^a   Panão, Miguel R O ^a  

^a INSTITUTO SUPERIOR TÉCNICO   (Portugal)

Author keywords

Phase Doppler anemometer; Port fuel injection; Spray impingement; Surface heat flux

Indexed keywords

ANEMOMETERS; FLUID DYNAMICS; HEAT FLUX; HEAT TRANSFER; INTEGRAL EQUATIONS; THERMOCOUPLES;

LEIDENFROST PHENOMENON; PHASE-DOPPLER ANEMOMETER; SPRAY COOLING; SPRAY IMPINGEMENT;

SPRAYING;

ANEMOMETERS; FLUID DYNAMICS; HEAT FLUX; HEAT TRANSFER; INTEGRAL EQUATIONS; SPRAYING; THERMOCOUPLES;

EID: 33847082975     PISSN: 0142727X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijheatfluidflow.2006.03.004     Document Type: Article

References (29)

1. Alkidas, A.C., 2001. Intake-valve temperature histories during SI engine warm-up. SAE Technical Paper 2001-01-1704.
2. Arcoumanis, C., Chang, J.-C., 1994. Flow and heat transfer characteristics of impinging transient diesel sprays. SAE Technical Paper 940678.
3. Arcoumanis, C., Cutter, P., 1995. Flow and heat transfer characteristics of impinging diesel sprays under cross-flow conditions. SAE Technical Paper 950448.
4. Arcoumanis C., and Chang J.-C. Heat transfer between a heated plate and an impinging transient diesel spray. Experiments in Fluids 16 (1993) 105-119
5. Bauer, W.D., Heywood, J.B., Bauer, P., Gronniger, S., 1997. Heat transfer and mixture vaporization in intake port of spark-ignition engine. SAE Technical Paper 972983.
6. Bejan A. Heat Transfer (1993), John Wiley & Sons, Inc., Singapore p. 630
7. Buttsworth D.R., and Jones T.V. A fast-response high spatial resolution total temperature probe using a pulsed heating technique. Journal of Turbomachinery 120 (1998) 601-607
8. Chen X.D., and Nguang S.K. The theoretical basis of heat flux sensor. Journal of Applied Mathematics and Decision Sciences 7 (2003) 1-10
9. Choi K.J., and Yao S.C. Mechanisms of film boiling heat transfer of normally impacting spray. International Journal of Heat and Mass Transfer 30 (1987) 311-318
10. Cowart, J., Cheng, W., 1999. Intake valve thermal behavior during steady-state and transient engine operation. SAE Technical Paper 1999-01-3643.
11. Cutter, P., 1996. Diesel spray characteristics, spray/wall interaction and heat transfer. PhD Thesis, Imperial College of Science, Technology and Medicine, University of London.
12. Estes K.A., and Mudawar I. Correlation of Sauter mean diameter and critical heat flux for spray cooling of small surfaces. International Journal of Heat and Mass Transfer 38 (1995) 2985-2996
13. González J.E., and Black W.Z. Study of droplet sprays prior to impact on a heated horizontal surface. ASME Journal of Heat Transfer 119 (1997) 279-287
14. Jia W., and Qiu H.-H. Experimental investigation of droplet dynamics and heat transfer in spray cooling. Experimental Thermal and Fluid Science 27 (2003) 829-838
15. Lindgren, R., Denbratt I., 2000. Modelling gasoline spray-wall interaction - a review of current models. SAE Technical Paper 2000-01-2808.
16. Mundo C., Sommerfeld M., and Tropea C. Droplet-wall collisions: experimental studies of the deformation and breakup process. International Journal of Multiphase Flow 21 (1995) 81-173
17. Naber, J.D., Farrell, P.V., 1993. Hydrodynamics of droplet impingement on a heated surface. SAE Technical Papers 930919.
18. Panão, M.R., Moreira, A.L.N., 2002. Visualization and analysis of spray impingement under cross-flow conditions. SAE Technical Paper 2002-01-2664.
19. Panão M.R.O., and Moreira A.L.N. Experimental study of the flow regimes resulting from the impact of an intermittent gasoline spray. Experiments in Fluids 37 (2004) 834-855
20. Panão M.R.O., and Moreira A.L.N. Flow characteristics of spray impingement in PFI injection systems. Experiments in Fluids 39 (2005) 364-374
21. Panão M.R.O., and Moreira A.L.N. Thermo-and fluid dynamics characterization of spray cooling with multiple-intermittent sprays. Experimental Thermal and Fluid Science 30 (2005) 79-96
22. Reichelt L., Meingast U., and Renz U. Calculating transient wall heat flux from measurements of surface temperature. International Journal of Heat and Mass Transfer 45 (2002) 579-584
23. Roisman I.V., and Tropea C. Flux measurements in sprays using phase-Doppler techniques. Atomization and Sprays 11 (2001) 667-700
24. Saffman M. Automatic calibration of LDA measurement volume size. Applied Optics 26 (1987) 2592-2597
25. Shayler, P.J., Colechin, M.J.F., Scarisbrick, A., 1996. Fuel film evaporation and heat transfer in the intake port of an S.I. engine. SAE Technical paper 961120.
26. Sowa W.A. Interpreting mean drop diameters using distribution moments. Atomization and Sprays 2 (1992) 1-15
27. Tate, R.W., 1982. Some problems associated with the accurate representation of droplet size distributions. In: Proceedings of the Second International Conference on Liquid Atomic and Spray Systems, Madison.
28. Yao S.C., and Choi K.J. Heat transfer experiments of mono-dispersed vertically impacting sprays. International Journal of Multiphase Flow 13 (1987) 639-648
29. Yoshida K., Abe Y., Oka T., Mori Y.H., and Nagashima A. Spray cooling under reduced gravity conditions. ASME Journal of Heat Transfer 123 (2001) 309-318