Transport of particulates in a rotating internal cooling ribbed duct

Proceedings of ASME Fluids Engineering Division Summer Meeting 2006, FEDSM2006

Volumn 1 SYPMOSIA, Issue , 2006, Pages 1595-1610

  Shah, Anant ^a   Tafti, Danesh K ^a  

^a State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COOLING; DUCTS; MICROSTRUCTURE; PARTICLE SIZE ANALYSIS; REYNOLDS NUMBER; VELOCITY MEASUREMENT;

ANGULAR VELOCITY; EULERIAN-LAGRANGIAN FRAMEWORK; RIBBED WALLS; TRAILING WALLS;

FLOW OF FLUIDS;

EID: 33847059578     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/fedsm2006-98020     Document Type: Conference Paper

References (60)

1. Jensen, J., Squire, S., Bons, J., and Fletcher, T., "Simulated Land-based turbine deposits generated in an accelerated deposition facility," J. Turbomachinery 127, 462-470, July 2005.
2. Grant G., and Tabakoff, W., "Erosion Prediction in Turbomachinery Resulting from Environmental Solid Particles," J. Aircraft 12, 5, May 1975
3. Ghenaiet, A., elder, R. L., and Tan, S. C., "Particles and trajectories through an axial fan and performance degradation due to sand ingestion," ASME Paper No. 2001-GT-497, 2001.
4. Kim, J., Dunn, M. G., Baran, A. J. and Wade, D. P., "Deposition of Volcanic materials in the hot sections of two gas turbine engines," J. Eng. Gas Turbines Power 115, pp. 641-651, 1993.
5. f augmentation for real turbine roughness with elevated freestream turbulence," ASME J. Turbomachinery 124, pp. 632-644, 2002.
6. Tabakoff, W., and Wakeman, T., "Test facility for material erosion at high temperature," ASTM Special Publication 664, pp. 123-135, 1979.
7. Tabakoff, W., Metwally, M., and Hamed, A., "High temperature coatings for protection against turbine deterioration," ASME J. Eng. Gas Turbines Power 117, pp. 146-151, 1995.
8. Walsh, P. N., Quest, J. M., Tucker, R. C. Jr., "Coating for the protection of turbine blades from erosion," ASME J. Eng. Gas Turbines Power 117, pp. 152-155, 1995.
9. Zaita, A. V., Buley, G., Karlsons, G., "Performance deterioration modeling in aircraft gas turbine engines," ASME J. Eng. Gas Turbines Power 120, pp. 344-349, 1998.
10. Wenglarz, R. A., and Wright, I. G., "Alternate fuels for land-based turbines," Proceedings of the Workshop on . Materials and Practices to Improve Resistance to Fuel Derived Environmental Damage in Land- and Sea-Based Turbines, October 22-24, 2002, Colorado School of Mines, Golden, Co.
11. Toriz, F. C., Thakker, A. B., and Gupta, S. K., "Thermal Barrier Coatings for Jet Engines," ASME88-GT-279, 1988.
12. Smialek, J. L., Archer, F. A. and Garlick, R. G., eds., "The chemistry of Saudi Arabian sand: A deposition problem on helicopter turbine 'airfoils, Advances in synthesis and processes," SAMPE, 3, 1992, M92-M101.
13. th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Huntsville, Alabama, July 20-23, 2003.
14. Hathaway, M. D., Chen, J., and Webster, R., "Time accurate unsteady simulation of the stall inception process in the compression system of a US Army helicopter gas turbine engine," DoD HPCMP User's Group Conference (UGC), Belleview, Washington, June 9-13, 2003.
15. Tabakoff, W., and Hamed, A., "Installed engine performance in dust-laden atmosphere", AIAA/AHS/ASEE Aircraft Design Systems and Operations Meeting, San Diego, CA, October 31-November 2, AIAA-84-2488, 1984.
16. th International Gas Turbine and Aeroengine Congress and Exhibition, Toronto, Canada, June 4-8, 1989.
17. th Joint Fluid Mechanics, Plasma Dynamics and Laser Conference, Atlanta, GA, May 12-14, 1986.
18. st Aerospace Sciences Meeting, Reno, Nevada, January 10-13, 1983.
19. Schneider, O., Dohmen, H. J., Benra, F.-K., Brillert, D., "Investigations of dust separation in the internal cooling air system of gas turbines," Proceedings of ASME Turbo Expo 2003, GT2003-38293, Atlanta, GA, June 16-19, 2003.
20. Han, J. C., Dutta, S., and Ekkad, V., Gas Turbine Heat Transfer and Cooling Technology, Taylor and Francis, New York, 2000.
21. Pan, Y., Tanaka, T., and Tsuji, Y. "Direct numerical simulation of particle-laden rotating turbulent channel flow," Phys. Fluids 13(8), 2001.
22. th Symp. On Turbulent Shear Flows, Karlsruhe, pp. 6.14-6.19, 1983.
23. Tafti, D. K., and Vanka, S. P., "A numerical study of the effects of spanwise rotation on turbulent channel flow," Phys. Fluids, A 3(4), pp. 642-656, 1991.
24. Bardina, J., Ferziger, J., and Rogallo, R. S., "Effect of rotation on isotropic turbulence: Computation and Modelling," J. Fluid Mech. 154, pp. 321-336, 1985.
25. Piomelli, U., and Liu, J.-H., "Large-Eddy Simulation of rotating channel flows using a localized dynamic model," Phys. Fluids 1 (4), pp. 839-848, 1995.
26. Kristoffersen, R., and Andersson, H. I., "Direct Simulations of low-Reynolds-number turbulent flow in a rotating channel," J. Fluid Mech. 256, pp. 163-197, 1993.
27. Pallares, J., and Davidson, L., "Large-eddy simulations of turbulent flow in a rotating square duct," Phys. Fluids 12(11), pp. 2878-2894, 2000.
28. Kulick, J. D., Fessier, J. R., and Eaton, J. K., "Particle response and turbulence modification in fully turbulent channel flow", J. Fluid Mech. 277,109, 1994.
29. Pedinotti, S., Mariotti, G., and Banerjee, S., "Direct Numerical Simulation of particle behavior in the wall region of turbulent flows in horizontal channels", Int. J. Multiphase Flow 18, 6. 927-941, 1992.
30. Eaton, J. K., and Fessier, J. R., "Preferential concentration of particles by turbulence", Int. J. Multiphase Flow 20, 169, 1994.
31. Wang, L.-P., and Maxey, M. R., "Settling velocity and concentration distribution of heavy particles in homogeneous isotropic turbulence," J. Fluid Mech. 256, 27, 1993.
32. Rouson, D. W. I, and Eaton, J. K., "Direct numerical simulation of particles interacting with a turbulent channel flow," Proceedings of the 7th Workshop on Two-Phase Flow Predictions, edited by M. Sommerfeld, Erlangen, Germany, 1994.
33. Fessier, J. R., Kulick, J. D., and Eaton, J. K., "Preferential concentration of heavy particles in a turbulent channel flow," Phys. Fluids 6, 3742, 1994.
34. Marchioli, C., and Soldati, A., "Mechanisms for particle transfer and segregation in a turbulent boundary layer," J. Fluid Mech 468, 283-315, 2002.
35. Madabhushi, R. K., and Vanka, S. P., "Large Eddy Simulation of turbulence-driven secondary flow in a . square duct," Phys. Fluids A 3(11), 2734-2745, 1991.
36. Winkler, C. M., Sarma, L. R., and Vanka, S. P., "Preferential concentration of particles in a fully developed turbulent square duct flow," Int. J. of Multiphase Flow 30, 27-50, 2004.
37. Sharma, G., "Direct Numerical Simulation of particle-laden turbulence in a straight square duct", Masters Thesis, Mechanical Engineering, Texas A&M University, 2004.
38. Shah, A., and Tafti, D. K., "Transport of particulates in an internal cooling ribbed duct," Proc. of ASME Turbo Expo 2006, GT2006-91284, 2006.
39. Tafti, D. K., "Evaluating the role of subgrid stress modeling in a ribbed duct for the internal cooling of turbine blades," Int. Journal of Heat and Fluid Flow 26, 92-104, 2005.
40. Germano, M., Piomelli, U., Moin, P. and Cabot, W. H., "A dynamic subgrid-scale eddy viscosity model," Phys. Fluids A 3, pp. 1760-1765, 1991.
41. Tafti, D. K., "GenIDLEST - A scalable parallel computational tool for simulating complex turbulent flows," Proc. ASME Fluids Engineering Division, FED-Vol. 256, ASME-IMECE, New York, 2001.
42. Shah, A., "Development and application of dispersed two phase capability in a general multi-block Navier-Stokes solver," MS Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA, 2005.
43. Pan, Y., and Banerjee, S., "Numerical simulation of particle interactions with wall turbulence," Phys. Fluids 8(10), October 1996.
44. Wang, Q., Squires, K. D., "Large eddy simulation of particle-laden turbulent channel flow," Phys. Fluids 8(5), May 1996.
45. Elgobashi, S. and Truesdell, G. C., "Direct simulation of particle dispersion in a decaying isotropic turbulence," J. Fluid Mech. 242, 655, 1992.
46. Wang, Q., Squires, K. D., Chen, M., and McLaughlin, J. B., "On the role of the lift force in turbulence simulations of particle deposition," Int. J. Multiphase Flow 23, 749, 1997.
47. Kulick, J. D., Fessier, J. R., and Eaton, J. K., "Particle response and turbulence modification in fully developed channel flow," J. Fluid Mech, 277, 109-134, 1994.
48. Kaftori, D., Hetsroni, G., and Banerjee, S., "Particle behavior in the turbulent boundary layer. I. Motion, deposition, and entrainment," Phys. Fluids 1, 1095-1106, 1995.
49. Wang, Q., and Squires, K. D., "Large eddy simulation of particle deposition in a vertical turbulent channel flow," Int. J. Multiphase Flow 22, 667, 1996.
50. McLaughlin, J. B., "Aerosol particle deposition in numerically simulated channel flow," Phys. Fluids A 1, 1211, 1989.
51. Yeh, F., and Lei, U., "On the motion of small particles in a homogeneous isotropic turbulent flow," Phys. Fluids A 3, 2571, 1991.
52. Armenio. V., Piomelli, U., Fiorotto, V., "Effect of the subgrid scales on particle motion," Phys. of Fluids 11(10) 1999.
53. Sommerfeld, M., "Modeling of particle-wall collisions in confined gas-particle flows," Int. J. Multiphase Flow 18(6), 905-926, 1992.
54. Clift, R., Grace, J. R., and Weber, M. E., Bubbles, Drops and Particles, Academic Press, New York, 1978.
55. Crowe, C. T., Gore, R. A., and Troutt, T. R., "Particle dispersion by coherent structures in free shear flows," Part. Sci. Tech. 3, 149, 1985.
56. Fessier, J. R., Kulick, J. D., and Eaton, J. K., "Preferential concentration of heavy particles in a turbulent channel flow," Phys. Fluids 6, 11, 1994.
57. Van der Walt, J. P., Nurick, A., "Erosion of dust-filtered helicopter turbine engines Part I: Basic theoretical considerations," J. Aircraft 32(1), 1995.
58. Jensen, J. W., Squire, S. W., Bons, J. P., and Fletcher, T. H., "Simulated land-based turbine deposits generated in an accelerated deposition facility," GT2004-53324, International Gas Turbine and Aeroengine Congress and Exhibition, Vienna, Austria, June 13-17, 2004.
59. Abdel-Wahab, S. and Tafti, D. K., "Large eddy simulation of flow and heat transfer in a 90° ribbed duct with rotation - Effect of Coriolis forces," Proc. of ASME Turbo Expo 2004, GT2004-53796, 2004.
60. Hart, J. E., "Instability and Secondary Motion in a Rotating Channel Flow," J. Fluid Mech. 45, 341-351, 1971.