Knoop hardness of dental resin cements: Effect of veneering material and light curing methods

Polymer Testing

Volumn 26, Issue 2, 2007, Pages 268-273

  Nisie Tango, Rubens ^a   Alexandre Coelho Sinhoreti, Mario ^b   Bortolazzo Correr, Américo ^b   Felipe Jochims Schneider, Luis ^b   Tomomitsu Kimpara, Estevão ^a   Correr Sobrinho, Lourenço ^b  

^a SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^b UNIVERSITY OF CAMPINAS   (Brazil)

Author keywords

Ceramic; Hardness; Photo activation; Resin cement; Resin composite

Indexed keywords

CURING; HARDNESS; RESINS; VENEERS;

KNOOP HARDNESS; PHOTOACTIVATION; RESIN CEMENTS; RESIN COMPOSITES;

DENTAL CEMENT;

CEMENT; CURING; SYNTHETIC POLYMERS; TOOTH; VENEERS;

EID: 33846684790     PISSN: 01429418     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymertesting.2006.10.010     Document Type: Article

References (26)

1. Groten M., and Probster L. The influence of different cementetion modes on the fracture resistence of feldsphatic ceramic crowns. Int. J. Prosthodont. 10 (1997) 169-177
2. Rosenstiel S.F., Land M.F., and Crispin B.J. Dental luting agents: a review of the current literature. J. Prosthet. Dent. 80 (1998) 280-301
3. Breeding L.C., Dixon D.L., and Caughman W.F. The curing potential of light-activated composite resin luting agents. J. Prosthet. Dent. 65 (1991) 512-518
4. Rasetto F.H., Driscoll C.F., and von Fraunhofer J.A. Effect of light source and time on the polymerization of resin cement through ceramic veneers. J. Prosthodont. 10 (2001) 133-139
5. Linden J.J., Swift Jr. E.J., Boyer D.B., and Davis B.K. Photo-activation of resin cements through porcelain veneers. J. Dent. Res. 70 (1991) 154-157
6. Strang R., McCrosson J., Muirhead G.M., and Richardson S.A. The setting of visible-light-cured resins beneath etched porcelain veneers. Br. Dent. J. 163 (1987) 149-151
7. Watts D.C., and Cash A.J. Analysis of optical transmission by 400-500 nm visible light into aesthetic dental biomaterials. J. Dent. 22 (1994) 112-117
8. Hasegawa E.A., Boyer D.B., and Chan D.C. Hardening of dual-cured cements under composite resin inlays. J. Prosthet. Dent. 66 (1991) 187-192
9. Darr A.H., and Jacobsen P.H. Conversion of dual cure luting cements. J. Oral. Rehabil. 22 (1995) 43-47
10. Rueggeberg F.A., Caughman W.F., and Curtis Jr. J.W. Effect of light intensity and exposure duration on cure of resin composite. Oper. Dent. 19 (1994) 26-32
11. Witzel M.F., Braga R.R., Singer J.M., and Azevedo C.L. Bond strength between polymer resin-based cement and porcelain-dentin surfaces: influence of polymerization mode and early cyclic loading. Int. J. Prosthodont. 16 (2003) 145-149
12. Jandt K.D., Mills R.W., Blackwell G.B., and Ashworth S.H. Depth of cure and compressive strength of dental composites cured with blue light emitting diodes (LEDs). Dent. Mater. 16 (2000) 41-47
13. Kurachi C., Tuboy A.M., Magalhães D.V., and Bagnato V.S. Hardness evaluation of a dental composite polymerized with experimental LED-based devices. Dent. Mater. 17 (2001) 309-315
14. Ferracane J.L. Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins. Dent. Mater. 1 (1985) 11-14
15. Obici A.C., Sinhoreti M.A.C., Frollini E., Correr Sobrinho L., Goes M.F., and Henriques G.E.P. Monomer conversion at different dental composite depths using six light-curing methods. Polym. Test. 25 (2006) 282-288
16. Obici A.C., Sinhoreti M.A.C., Frollini E., Correr Sobrinho L., and Consani S. Degree of conversion and knoop hardness of Z250 composite using different photo-activaton methods. Polym. Test. 24 (2005) 814-818
17. Caughman W.F., Chan D.C., and Rueggeberg F.A. Curing potential of dual-polymerizable resin cements in simulated clinical situations. J. Prosthet. Dent. 86 (2001) 101-106
18. Kramer N., Lohbauer U., and Frankenberger R. Adhesive luting of indirect restorations. Am. J. Dent. 13 (2000) 60D-76D
19. Peutzfeldt A. Dual-cure resin cements: in vitro wear and effect of quantity of remaining double bonds, filler volume, and light curing. Acta Odontol. Scand. 53 (1995) 29-34
20. Rasetto F.H., Driscoll C.F., Prestipino V., Masri R., and von Fraunhofer J.A. Light transmission through all-ceramic dental materials: a pilot study. J. Prosthet. Dent. 91 (2004) 441-446
21. Danesh G., Davids H., Reinhardt K.J., Ott K., and Schafer E. Polymerisation characteristics of resin composites polymerised with different curing units. J. Dent. 32 (2004) 479-488
22. Brodbelt R.H., O'Brien W.J., and Fan P.L. Translucency of dental porcelains. J. Dent. Res. 59 (1980) 70-75
23. Moon H.J., Lee Y.K., Lim B.S., and Kim C.W. Effects of various light curing methods on the leachability of uncured substances and hardness of a composite resin. J. Oral. Rehabil. 31 (2004) 258-264
24. Mendes L.C., Tedesco A.D., and Miranda M.S. Determination of degree of conversion as function of depth of a photo-initiated dental restoration composite. Polym. Test. 24 (2005) 418-422
25. Mendes L.C., Tedesco A.D., Miranda M.S., Benzi M.R., and Chagas B.S. Determination of degree of conversion as function of depth of a photo-initiated dental restoration composite-II application to commercial SureFil™. Polym. Test. 24 (2005) 942-946
26. Dietschi D., Marret N., and Krejci I. Comparative efficiency of plasma and halogen light sources on composite micro-hardness in different curing conditions. Dent. Mater. 19 (2003) 493-500