Hot isostatic pressing of cubic boron nitride-tungsten carbide/cobalt (cBN-WC/Co) composites: Effect of cBN particle size and some processing parameters on their microstructure and properties

Journal of the American Ceramic Society

Volumn 90, Issue 2, 2007, Pages 415-424

  Martinez V ^a   Echeberria, J ^a  

^a TECNUN UNIVERSITY OF NAVARRA   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

CUBIC BORON NITRIDE; ENCAPSULATION; FRACTURE TOUGHNESS; HOT ISOSTATIC PRESSING; MICROSTRUCTURE; PARTICLE SIZE ANALYSIS; WEAR OF MATERIALS; X RAY DIFFRACTION;

CUBIC BORON NITRIDE (CBN); GLASS ENCAPSULATION; HARD METAL COMPOSITES;

COMPOSITE MATERIALS;

EID: 33846486658     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2006.01426.x     Document Type: Article

References (18)

1. J. Echeberria, V. Martínez, J. M. Sánchez, L. Bourgeois, G. Barbier, and J. Hennicke, "Sintering Behaviour of Low Co Content cBN-WC/Co Composites by Either GEHIP or FAST"; pp. 434-48 in Proc. 16th Plansee Seminar, Vol. 2, Edited by G. Kneringer et al., Reutte, Austria, 2005.
2. L. Bourgeois, G. Barbier, J. Hennicke, H.-U. Kessel, V. Martinez, J. Echeberria, J. M. Sanchez, and P. Harden, "Development of CDCC Composites by either HIP or Field Assisted Sintering Technology"; pp. 684-98 in Proc. 16th Plansee Seminar, Vol. 2, Edited by G. Kneringer el al., Reutte, Austria, 2005.
3. Y. Miyamoto, T. Kashiwagi, K. Hirota, Osamu Yamaguchi, H. Moriguchi, K Tsuduki, and A. Ikegaya, "Fabrication of New Cemented Carbide Containing Diamond Coated with Nanometer-Sized SiC Particles," J. Am. Ceram. Soc., 86 [1] 73-6 (2003).
4. D. Gonia, K. Weinert, and M. Hagedorn "Guiding Pads for Deep Hole Drilling Tools Made of Diamond Dispersed Carbides." Euro PM2003, Hard Materials / Diamond Tools.
5. H. Moriguchi, K. Tsuduki, and A. Ikegaya, Metal Powder Report, April 2004, pp. 26-28.
6. X. L. Shi, G. Q. Shao, X. L. Duan, Z. Xiong, and H. Yang, "The effect of tungsten buffer layer on the stability of diamond with tungsten carbide - cobalt nanocomposite powder during spark plasma sintering," Diam. Relat. Mater., 2006, in press.
7. X. Z. Rong, T. Tsurumi, O. Fukunaga, and T. Yano, Diam. Relat. Mater., 11, 280-6 (2002).
8. E. Benko, J. S. Stanislaw, B. Królicka, A. Wyczesany, and T. Barr, "cBN-TiN, cBN-TiC Composites: Chemical Equilibria, Microstructure and Hardness Mechanical Investigations," Diam. Relat. Mater., 8, 1838-46 (1999).
9. F. Ueda, M. Yageta, and I. Tajima, "Microstructure and Mechanical Properties of cBN-TiN Composites," J. Hard Mater., 1991 2, 233-43.
10. X. Rong and O. Fukunaga, "Die," Fil. Technol., 11, 67-75 (1993).
11. O. Kruse, B. Jansson, and K., Frise, "Experimental Study of Invariant Equilibria in the Co-W-C and Co-W-C-Me (Me = Ti,Ta,Nb) Systems," J. Phase Equilibria, 22 [5] 552-5 (2001).
12. J. M. Sánchez, A. Ordoñez, and R. Gonzalez, "IP After Sintering of Ultrafine WC-Co Hardmetals," Int. J. Refract. Hard Mater., 23/3, 193-8 (2005).
13. H. P. Klug and L. E. Alexander, X-ray Diffraction Procedures for Crystalline and Amorphous Materials, 2nd ed, Wiley-Interscience Publications, 1974.
14. J. Martín, J. García, R. González, I. Iturriza, and F. Castro. "Liquid Phase Sintering of cBN-based Cermets at Relatively Low Pressure." Advances in PM and Particulate Materials, Washington, 1996, MPIF, 11-209-20.
15. K. Shetty, I. G. Wright, P. N. Mincer, and A. H. Clauer, "Indentation Fracture of WC-Co Cermets," J. Mater. Sci., 20, 1873 (1985).
16. G. R. Anstis, P. Chantikul, B. R. Lawn, and D. B. Marshall, "A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness," J. Am Ceram. Soc., 64, 533 (1981).
17. V. Martínez and J. Echeberria, Report CRC No. 3, Annex 6 in 18-Months "Periodic Progress Report No.3," November 2003, EU-funded FAST project (Project No GRD1-2001-40737).
18. I. Azeona, A. Ordoñez, J. M. Sánchez, and F. Castro, "Hot Isostatic Pressing of Ultrafine Tungsten Carbide-Cobalt Hardmetals," J. Mater. Sci., 37, 4189-95 (2002).