Rapid circular microfluidic mixer utilizing unbalanced driving force

Biomedical Microdevices

Volumn 9, Issue 1, 2007, Pages 43-50

  Lin, Che Hsin ^a   Tsai, Chien Hsiung ^b   Pan, Chih Wen ^b   Fu, Lung Ming ^b  

^a NATIONAL SUN YAT SEN UNIVERSITY   (Taiwan)

^b NATIONAL PINGTUNG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Taiwan)

Author keywords

Circular microfluidic mixer; Lab on a chip; Low Reynolds numbers

Indexed keywords

COMPUTER SIMULATION; FLOW VISUALIZATION; HYDRODYNAMICS; REYNOLDS NUMBER;

CIRCULAR MICROFLUIDIC MIXER; MICRO-TOTAL-ANALYSIS-SYSTEMS; UNBALANCED DRIVING FORCE;

MIXING;

GLASS;

ARTICLE; BIOMECHANICS; CONTROLLED STUDY; COST; EQUIPMENT DESIGN; FLUID FLOW; HYDRODYNAMICS; MATHEMATICAL MODEL; MICROANALYSIS; MICROFLUIDICS; MIXER; PERFORMANCE; PREDICTION; PRIORITY JOURNAL; RELIABILITY; SIMULATION;

CHEMISTRY, ANALYTICAL; COMPLEX MIXTURES; EQUIPMENT DESIGN; EQUIPMENT FAILURE ANALYSIS; MICROFLUIDICS; MOTION; STRESS, MECHANICAL;

EID: 33846011449     PISSN: 13872176     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10544-006-9009-3     Document Type: Article

References (53)

1. E. Biddiss, D. Erickson, and D. Li, Anal. Chem. 76, 3208 (2004).
2. B.J. Burke and F.E. Regnier, Anal. Chem. 75, 1786 (2003).
3. C.C. Chang and R.J. Yang, J. Micromech. Microeng. 14, 550 (2004).
4. H. Chen and J.C. Meiners, Appl. Phys. Lett. 84, 2193 (2004).
5. Y.C. Chung, Y.L. Hsu, C.P. Jen, M.C. Lu, and Y.C. Lin, Lab on a Chip 4, 70 (2004).
6. J.T. Coleman and D. Sinton, Microfluidics Nanofluidics 1, 319 (2005).
7. A. Dodge, M.C. Jullien, Y.K. Lee, X. Niu, F. Okkels, and P. Tabeling, Comptes Rendus Physique 5, 559 (2004).
8. D. Erickson and D. Li, Langmuir 18, 1883 (2002).
9. R. Ferrigno, J.N. Lee, X. Jiang, and G.M. Whitesides, Anal. Chem. 76, 2273 (2004).
10. L.M. Fu and C.H. Lin, Anal. Chem. 75, 5790 (2003).
11. L.M. Fu, R.J. Yang, G.B. Lee, and Y.J. Pan, Electrophoresis 24, 3026 (2003a).
12. L.M. Fu, R.J. Yang, C.H. Lin, G.B. Lee, and Y.J. Pan, Anal Chimica ACTA 507, 163 (2004).
13. L.M. Fu, R.J. Yang, C.H. Lin, and Y.S. Chien, Electrophoresis 26, 1814 (2005).
14. L.M. Fu and C.H. Lin, Electrophoresis 25, 3652 (2005).
15. T. Fujii, Y. Sando, K. Higashino, and Y. Fujii, Lab on a Chip 3, 193 (2003).
16. I. Glasgow, S. Lieber, and N.Aubry, Anal. Chem. 76, 4825 (2004).
17. S. Hardt and F. Schönfeld, AIChE J. 49, 578 (2003).
18. B. He, B.J. Burke, X. Zhang, R. Zhang, and F.E. Regnier, Anal. Chem. 73, 1942 (2001).
19. C.C. Hong, J.W.Choi, and C.H. Ahn, Lab on a Chip 4, 109 (2004).
20. F. Jiang, K.S. Drese, S. Hardt, M. Küpper, and F. Schönfeld, AIChE J. 50, 2297 (2004).
21. T.J. Johnson, D. Ross, and L.E. Locascio, Anal. Chem. 74, 45 (2002).
22. M. Kakuta, F.G. Bessoth, and A. Manz, Chem. Rec. 1, 395 (2001).
23. T.G. Kang and T.H. Kwon, J. Micromech. Microeng. 14, 891 (2004).
24. T. Kamei, N.M. Toriello, E.T. Lagally, R.G. Blazej, J.R. Scherer, R.A. Street, and R.A. Mathies, Biomed. Microdevices 7(2), 147(2005).
25. D.S. Kim, S.W. Lee, T.H. Kwon, and S.S. Lee, J. Micromech. Microeng. 14, 798 (2004a).
26. D.S. Kim, I.H. Lee, T.H. Kwon, and D. Cho, J. Micromech. Microeng. 14, 1294 (2004b).
27. J.B. Knight, A. Vishwanath, J.P. Brody, and R.H. Austin, Phys. Rev. Lett. 80, 3863 (1998).
28. B.P. Leonard, Proc. Int. Conf. on Numerical Methods in Laminar and Turbulent Flow, Part 1 (Pineridge Press, Swansea, 1987).
29. C.H. Lin, L.M. Fu, and Y.S. Chien, Anal. Chem. 76, 5265 (2004).
30. C.H. Lin, C.H. Tsai, and L.M. Fu, J. Micromech. Micromachining 15, 935 (2005).
31. Y.Z. Liu, B.J. Kim, and H.J. Sung, Int. J. Heat Fluid Fl. 25, 986 (2004).
32. R.H. Liu, M.A. Stremler, K.V. Sharp, M.G. Olsen, J.G. Santiago, R.J. Adrian, H. Aref, and D.J. Beebe, J. Microelectromech. S. 9, 190 (2000).
33. R.H. Liu, R. Lenigk, R.L. Druyor-Sanchez, J. Yang, and P. Grodzinski, Anal. Chem. 75, 1911 (2003).
34. P. Löb, K.S. Drese, V. Hessel, S. Hardt, C. Hofmann, H. Löwe, R. Schenk, and F. Schönfeld Chem. Eng. Technol. 27, 340 (2004).
35. H. Mao, T. Yang, and P.S. Crèmer, J. Am. Chem. Soc. 124, 4432 (2002).
36. V. Mengeaud, J. Josserand, and H.H. Girault, Anal. Chem. 74, 4279 (2002).
37. X. Niu, and Y.K. Lee, J. Micromech. Micromachining 13, 454 (2003).
38. S.J. Park, J.K. Kim, J. Park, S. Chung, C. Chung, and J.K. Chang, J. Micromech. Microeng. 14, 6 (2004).
39. F. Schönfeld, and S. Hardt, AIChE J. 50, 771 (2004).
40. A.D. Stroock, S.K.W. Dertinger, A. Ajdari, I. Mezic̈, H.A. Stone, and G.M. Whitesides, Science 295, 647 (2002).
41. Z. Tang, S. Hong, D. Djukic, V. Modi, A. West, J. Yardley, and R.M. Osgood, J. Micromech. Microeng. 12, 870 (2002).
42. M. Tabuchi, M. Ueda, N. Kaji, Y. Yamasaki, Y. Nagasaki, K. Yoshikawa, K. Kataoka, and Y. Baba, Nat. Biotechnol. 22, 337 (2004).
43. J.P. van Doormal and G.D. Raithby, Numer. Heat Transfer 7, 147 (1984).
44. R.A. Vijiayendran, K.M. Motsegood, D.J. Beebe, and D.E. Leckband, Langmuir 19, 1824 (2003).
45. K. Wang, S. Yue, L. Wang, A. Jin, C. Gu, P. Wang, Y. Feng, Y. Wang, and H. Niu, Microfluidics Nanofluidics 2, 85 (2006).
46. C.W. Wei, J.Y. Cheng, and T.H. Young, Biomed. Microdevices 8, 65 (2006).
47. S.H. Wong, M.C.L. Ward, and C.W. Wharton, Sensor. Actuator. B. 100, 365 (2004).
48. Z. Wu, N.T. Nguyen, and X.Y. Huang, J. Micromech. Microeng. 14, 604 (2004).
49. Z. Wu and N.T. Nguyen, Biomed. Microdevices 7 (1), 131 (2005).
50. Q. Xiang, B. Xu, R. Fu, and D. Li, Biomed. Microdevices 7 (4), 273 (2005).
51. X. Xuan and D. Li, Electrophoresis 26, 3552 (2005).
52. Z. Yang, H. Goto, M. Matsumoto, and R. Maeda, Electrophoresis 21, 116 (2000).
53. G.G. Yaralioglu, I.O. Wygant, T.C. Marentis, and B.T. Khuri-Yakub, Anal. Chem. 76, 3694 (2004).