Surface analysis and biocorrosion properties of nanostructured surface sol-gel coatings on Ti6Al4V titanium alloy implants

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 80, Issue 1, 2007, Pages 107-120

  Advincula, Maria C ^a   Petersen, Don ^a   Rahemtulla, Firoz ^b   Advincula, Rigoberto ^a,c   Lemons, Jack E ^a,b  

^a and Radiation Oncology   (United States)

^b UNIVERSITY OF ALABAMA AT BIRMINGHAM   (United States)

^c University of Houston   (United States)

Author keywords

AFM; Biocorrosion; Coatings; Sol gel; Titanium alloys; XPS

Indexed keywords

ATOMIC FORCE MICROSCOPY; IMPLANTS (SURGICAL); NANOSTRUCTURED MATERIALS; SOL-GELS; SURFACE ROUGHNESS; TITANIUM ALLOYS; X RAY PHOTOELECTRON SPECTROSCOPY;

ADHESIVE STRENGTH; BIOCORROSION; BIOIMPLANTS;

PROTECTIVE COATINGS;

APATITE; CALCIUM; NANOMATERIAL; PHOSPHATE; TITANIUM;

ADHESION; ARTICLE; ATOMIC EMISSION SPECTROMETRY; ATOMIC FORCE MICROSCOPY; BIOCOMPATIBILITY; BODY FLUID; BONE REGENERATION; CHEMICAL COMPOSITION; CORRELATION ANALYSIS; CORROSION; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; ENERGY DISPERSIVE SPECTROMETRY; IMPLANT; MATERIAL COATING; POLARIZATION; ROENTGEN SPECTROSCOPY; SCANNING ELECTRON MICROSCOPY; SIMULATION; SPECTROMETRY; SURFACE PROPERTY; TECHNIQUE;

BODY FLUIDS; COATED MATERIALS, BIOCOMPATIBLE; CORROSION; HUMANS; MATERIALS TESTING; MICROSCOPY, ATOMIC FORCE; NANOSTRUCTURES; TITANIUM;

EID: 33845916825     PISSN: 00219304     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.30575     Document Type: Article

References (47)

1. Albrektsson T, Branemark PI, Hansson HA, Kasemo B, Larsson K, Lundstrom I, McQueen DH, Skalak R. The interface zone of inorganic implants in vivo: Titanium implants in bone. Ann Biomed Eng 1983;11:1-27.
2. 2 films deposited on titanium and stainless steel by ion-beam assisted sputtering. J Biomed Mater Res 1997;35:309-318.
3. Metikoš-Huković M, Kwokal A, Piljac J. The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution. Biomaterials 2003;24:3765-3775.
4. Venugopalan R, Trepanier C. Assessing the corrosion behavior of nitinol for minimally invasive device design. Minim Invasive Ther Allied Technol 2000;9:67-74.
5. Eisenbarth E, Velten D, Schenk-Meuser K, Linez P, Biehl V, Duschner H, Breme J, Hildebrand H. Interactions between cells and titanium surfaces. Biomol Eng 2002;19:243-249.
6. Solar RJ, Pollack SR, Korostoff E. In vitro corrosion testing of titanium surgical implant alloys: An approach to understanding titanium release from implants. J Biomed Mater Res 1979;13:217-250.
7. Rogers D, Howie DW, Graves SE, Pearcy MJ, Haynes DR. In vitro human monocytes response to wear particles of titanium alloy containing vanadium or niobium. J Bone Joint Surg Br 1997;79:311-315.
8. Chang TM, Yang CY. Effect of passivation on the dissolution behavior of Ti6A14V and vacuum-brazed Ti6A14V in Hank's ethylene diamine tetra-acetic acid solution. Part 1: Ion release. J Mater Sci: Mater Med 1999;10:541-548 and references therein.
9. Browne M, Gregson PJ. Effect of mechanical surface pretreatment on metal ion release. Biomaterials 2000;21:385-392 and references therein.
10. Lacefield WR. Current status of ceramic coatings for dental implants. Implant Dent 1998;7:315-322.
11. Catledge SA, Fries MD, Vohra YK, Lacefield WR, Lemons JE, Woodard S, Venugopalan R. Nanostructured ceramics for biomedical implants. J Nanosci Nanotechnol 2002;2:293-312.
12. Li P, Groot K. Calcium phosphate formation within sol-gel prepared titania in vitro and in vivo. J Biomed Mater Res 1993;27:1495-1500.
13. Lev O, Wu Z, Bharathi S, Glezer V, Modestov A, Gun J, Rabinovich L, Sampath S. Sol-gel materials in electrochemisty. Chem Mater 1997;9:2354-2375.
14. Gallardo J, Duran A, Damborenea JJ. Electrochemical and in vitro behavior of sol-gel coated 316L stainless steel. Corros Sci 2004;46:795-806.
15. Cheng FT, Shi P, Man HC. Anatase coating on NiTi via a low-temperature sol-gel route for improving corrosion resistance. Scripta Mater 2004;51:1041-1045.
16. 2 film on NiTi surgical alloy for biocompatibility improvement. Thin Solid Films 2003;429:225-230.
17. Yoshida K, Kamada K, Sato K, Hatada R, Baba K, Atsuta M. Thin sol-gel derived silica coatings on dental pure titanium casting. J Biomed Mater Res 1999;48:778-785.
18. Li P, Ohtsuki C, Kokubo T, Kazuki N, Naohiro S, de Groot K. The role of hydrated silica, titania and alumina in inducing apatite on implants. J Biomed Mater Res 1994;28:7-15.
19. Wen HB, de Wijn JR, Cui FZ, de Groot K. Preparation of calcium phosphate coatings on titanium implant materials by simple chemistry. J Biomed Mater Res 1998;41:227-236.
20. 2 substrates in vitro. J Biomed Mater Res 1999;44:12-21.
21. Peltola T, Rahiala P, Kangasniemi I, Yli-Urpo A. Calcium phosphate induction by sol-gel derived titania coatings on titanium substrates in vitro. J Biomed Mater Res 1998;41:504-510.
22. Kangasniemi IM, Verheyen CC, van der Velde EA, de Groot K. In vivo tensile testing of fluorapatite and hydroxylapatite plasma-sprayed coatings. J Biomed Mater Res 1994;28:563-572.
23. Gill I. Bio-doped nanocomposites polymers: Sol-gel bioencapsultes. Chem Mater 2002;13:3404-3421.
24. Ichinose I, Senzu H, Kunitake T. Stepwise adsorption of metal alkoxides on hydrolyzed surfaces: A surface sol-gel process. Chem Lett 1996;257, 258.
25. 2 films. Chem Mater 2002;14:3493-3500.
26. Acharya K, Kunitake T. A general method for fabrication of biocompatible surfaces by modification with titania layer. Langmuir 2003;19:2260-2266.
27. Fang M, Kim CH, Martin BR, Mallouk TE. Surface sol-gel synthesis of ultrathin titanium and tantalum oxide films. J Nano-particle Res 1999;1:43-49.
28. Hashizume M, Kunitake T. Preparation and functionalization of self-supporting (polymer/metal oxide) composite ultrathin films. Focussed on nanotechnology in Riken II. Riken Rev 2001;38:36-39.
29. Advincula M, Fan X, Lemons J, Advincula R. Surface modification of layer-by-layer sol-gel derived titanium oxide films by self-assembled monolayers (SAMs): Investigating protein adsorption. Colloids Surf B 2005;42:29-43.
30. Nanci A, Wuest JD, Peru L, Brunet P, Sharma V, Zalzal S, Mckee MD. Chemical modification of titanium surfaces for covalent attachment of biological molecules. J Biomed Mater Res 1998;40:324-335.
31. x ultrathin coatings. Submitted for publication.
32. Yeum B. EIS Data Analysis Software User Manual. Ann Arbor, Michigan: Princeton Applied Research; 2002. p 2.
33. Advincula M, Bellis S, Rahemtulla F, Advincula R, Lemons J. Surface topography, chemistry and wettability modulate the attachment of osteoblast cells and mineralization in vitro on sol-gel derived titanium alloy. Biomaterials 2006;27:2201-2212.
34. Lu G, Bernasek S, Schwartz J. Oxidation of polycrystalline titanium surface by oxygen and water. Surf Sci 2000;458:80-90.
35. Haddow DB, Kothari S, James PF, Short RD, Hatton PV, van Noort R. Synthetic implant surfaces. I. The formation and characterization of sol-gel titania films. Biomaterials 1996;17:501-507.
36. Bagno A, Di Bello C. Surface treatment and roughness properties of Ti-based materials. J Mater Sci: Mater Med 2004;15:935-949.
37. Areva S, Peltola T, Sailynoja E, Laajalehto K, Linden M, Rosenholm JB. Effect of albumin and fibrinogen on calcium phosphate formation on sol-gel derived titania coatings in vitro. Chem Mater 2002;14:1614-1621.
38. 2 films deposited by dip-coating method. J Biomed Mater Res 1998;42:295-302.
39. Keller JC, Schneider GB, Stanford CM, Kellogg B. Effects of implant microtopography on osteoblast cell attachment. Implant Dent 2003;12:175-181.
40. Jandt K. Atomic force microscopy of biomaterial surfaces and interfaces. Surf Sci 2001;491:303-332.
41. Venugopalan R, Gaydon J. A review of corrosion behavior of surgical implant alloys. Technical review note 99-01. Princeton Applied Research, Ann Arbor, Michigan, 2001.
42. 2 layers on CpTi and Ti6A14V by thermal and anodic oxidation and by sol-gel coating techniques and their characterization. J Biomed Mater Res 2002;59:18-28.
43. Blumenthal NC, Cosma V. Inhibition of apatite formation by titanium and vanadium ions. J Biomed Mater Res 1989;23:13-22.
44. Callen BW, Lowenberg BF, Lugowski S, Sodhi RN, Davies JE. Nitric acid passivation of Ti6A14V reduces thickness of surface oxide layer and increases trace element release. J Biomed Mater Res 1995;29:279-290.
45. Yoshida K, Tanagawa M, Kamada K, Hatada R, Baba K, Inoi T, Atsuta M. Silica coatings formed on noble dental casting alloy by the sol-gel dipping process. J Biomed Mater Res 1999;46:221-227.
46. Healy KE, Ducheyne P. The mechanism of passive dissolution of titanium in a model physiological environment. J Biomed Mater Res 1992;26:319-338.
47. Healy KE, Ducheyne P. Hydration and preferential molecular adsorption on titanium in vitro. Biomaterials 1991;12:767-774.