Unified analytical approaches for determining shear bond characteristics of FRP-concrete interfaces through pullout tests

Journal of Advanced Concrete Technology

Volumn 4, Issue 1, 2006, Pages 133-145

  Dai, Jianguo ^a   Ueda, Tamon ^b   Sato, Yasuhiko ^b  

^a PORT AND AIRPORT RESEARCH INSTITUTE   (Japan)

^b HOKKAIDO UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

BOND STRENGTH (MATERIALS); FIBER REINFORCED PLASTICS; MATHEMATICAL MODELS; REINFORCED CONCRETE; RELIABILITY;

PULLOUT TESTS; SHEAR BONDS; STRESS DISTRIBUTIONS; STRESS SLIP MODELS;

INTERFACES (MATERIALS);

EID: 33845703974     PISSN: 13468014     EISSN: None     Source Type: Journal    
DOI: 10.3151/jact.4.133     Document Type: Article

References (44)

1. Bizindavyi, L. and Neale, K. W. (1999). "Transfer length and bond strength for composites bonded to concrete", Journal of Composites for Construction, ASCE, 3(4), 153-160.
2. Brosens K, Van Germert D. (1998). "Plate end shear design for external CFRP laminate", Proceeding of FRAMCOS-3, Gifu, Japan, 1793-1804.
3. Brosens, K. and Van Gemert, D. (1999). "Anchorage design for externally bonded carbon fiber reinforced polymer laminates", AGI, SP 188-56, 635-641.
4. Buyukozturk, O., and Hearing B. (1998). "Fracture behavior of precracked concrete beams retrofitting with FRP", Journal of Composites for Construction, ASCE, 2 (3), 138-144.
5. Buyukozturk, O., Gunes, O., and Karaca, E. (2004). "Progress on understanding problems in reinforced concrete and steel members strengthened using FRP composites", Construction and Building Materials, 18. 9-19.
6. Chajes, M. J., Finch, William. W., Januszka, T. F. and Thomson, T. A. (1996). "Bond and force transfer of composite material plates bonded to concrete", ACI Structural Journal, 93 (2), 208-217.
7. Chen, J. F. and Teng, J. G. (2001). "Anchorage strength models for FRP and steel plates bonded to concrete." Journal of Structural Engineering, ASCE, 127 (7), 784-791.
8. Chen J. F., Teng J. G. (2003). "Shear capacity of FRP-strengthened RC beams: FRP debonding", Construction and Building Materials, 17(1), 27-41.
9. Dai, J. G., Sato, Y. and Ueda, T. (2002). "Improving the load transfer and effective bond length for FRP composites bonded to concrete." Proceedings of the Japan Concrete Institute, 24, 1423-1428.
10. Dai, J. G. (2003). "Interfacial models for fiber reinforced polymer (FRP) sheets externally bonded to concrete." Ph. D dissertation, Hokkaido University, Japan.
11. Dai, J. G., Sato, Y., and Ueda, T. (2005). "Development of nonlinear bond stress slip model with a simple method." Journal of Composite for Construction, ASCE, 9(1), 52-62.
12. Externally Bonded FRP Reinforcement for RC Structures, fib bulletin 14 TC Report, 2001.
13. Gabriel S. (2000). "Model for shear resisting capacity of reinforced concrete columns strengthened with carbon fiber sheets." Doctoral dissertation, Hokkaido University.
14. Karbhari, V.M. and Engineer, M. (1996). "Investigation of bond between concrete and composites: Use of a Peeling Test." Journal of Reinforced Plastics and Composites, 15, 208-227.
15. Kamiharako A., Shimomura T., Maruyama K. (2001). "Evaluation method for shear capacity of RC members retrofitted with externally bonded continuous fiber sheet", JSCE, Concrete Library International, 37, 147-160.
16. Kanakubo, T., Furuta, T., and Fukuyama, H. (2003). "Bond strength between fiber-reinforced polymer laminates and concrete. ", Proceedings of FRPRCS-6, Edited by K. H Tan, Singapore, 8-10 July 2003, 134-143.
17. Khalifa A.; Gold, W.; Nanni., A, and Abel-Aziz M. I. (1998). "Contribution of externally bonded FRP to the shear capacity of RC flexural members", Journal of Composites for Construction, ASCE, 2 (4), 195-202.
18. Li, V. C. and Ward, R. J. (1989). "A novel testing technique for post-peak tensile behaviors of cementitious materials", Fracture Toughness and Fracture Energy, Balkema, 193-195.
19. Lorenzis, L. De., Miller, B., and Nanni, A. (2001). "Bond of fiber-reinforced polymer laminates to concrete", ACI Material Journal, 98 (3), 256-264.
20. Maeda, T., Asano, Y., Sato, Y., Ueda, T., and Kakuta, Y. (1997). "A study on bond mechanism of carbon fiber sheet." Non-Metallic (FRP) Reinforcement for Concrete Structures, Proceedings of Third International Symposium, 1, 279-286.
21. Miller, B. and Nanni, A. (1999). "Bond between CFRP sheets and concrete." Proc. of ASCE 5th Materials Congress, Edited by L. C. Bank, Cincinnati, OH, 240-247.
22. Nakaba, K., Kanakubo, T., Furuta, T. and Yoshizawa, H. (2001). "Bond behavior between fiber-reinforced polymer laminates and concrete", ACI Structural Journal, 98 (3), 359-167.
23. Neubauer, U., and Rostásy, F. S. (1997). "Design aspects of concrete structures strengthened with externally bonded CFRP plates." Proceedings of 7th International Conference on Structural Faults and Repairs, ECS Publications, Edinburg, Scotland, 2, 109-118.
24. Recommendations for Upgrading of Concrete Structures with Use of Continuous Fiber Sheets, JSCE, Concrete Library, 2000, 7.
25. Santos, A. C. Dos., Bittencourt T. N. and Gettu, R. (2003). "Experimental analysis of interface between CFRP and concrete using cylindrical specimens.", Proceedings of FRPRCS-6, Edited by K. H Tan, Singapore, 183-182.
26. Sato, Y. and Vecchio, Frank J. (2003). "Tension stiffening and crack formation in reinforced concrete members with fiber-reinforced polymer sheets", ASCE, Journal of Structural Engineering, 129 (6), 717-724.
27. Sato, Y., Asano, Y. and Ueda, T. (2001). "Fundamental study on bond mechanism of carbon fiber sheet", Concrete Library International, JSCE, 37, 97-115.
28. Sato, Y., Kimura, K. and Kobatake, Y. (1997). "Bond behaviors between CFRP sheet and concrete", Journal of Structural Construction Engineering, AU, No.500, 75-82. (in Japanese)
29. Sebastian W. M. (2001). "Significance of mid-span debonding failure in FRP-plated concrete beams", Journal of Structural Engineering, ASCE, 127 (7), July 2001.
30. Shima, H., Chou, L. and Okamura, H. (1987). "Micro and Macro Models for Bond in Reinforced Concrete.", Journal of the Faculty of Engineering, The University of Tokyo (B), 39 (2).
31. Smith S. T. and Teng J. G. (2002). FRP-strengthened RC beams. I: Review of debonding strength models, Engineering Structures, 24 (4), 385-395.
32. Täljsten, B. (1996). "Strengthening of concrete prisms using the plate-bonding technique." International Journal of Fracture, 82, 253-266.
33. Täljsten B. (1997). "Defining anchor lengths of steel and CFRP plates bonded to concrete", International Journal of Adhesion and Adhesives, 17 (4), 319-327.
34. Teng, J. G., Smith, S. T., Yao, J. and Chen, J. F. (2003). "Intermediate crack-induced debonding in RC beams and slabs." Construction and Building Materials, 17, 447-462.
35. Teng, J. G., Lu, X. Z., Ye, L. P. and Jiang, J. J. (2004). "Bond-slip models for interfaces between externally bonded FRP and concrete", Proceedings of the Second International Conference on FRP Composites in Civil Engineering-CICE 2004, Adelaide, Australia, 55-68.
36. Triantafillou, T. C. (1999). "Guidelines for the Dimensioning of Reinforced Concrete Elements Strengthened with Sika Carbondur/Sikawrap", University of Patras, Greece.
37. Ueda, T., Sato, Y. and Asano, Y. (1999). "Experimental study on bond strength of continuous carbon fiber sheet." AGI, SP 188-37, 407-413.
38. Ueda, T. and Dai, J. G. (2004). "New Shear Bond Model for FRP-Concrete Interface-from modeling to application." Proceedings of the Second International Conference on FRP Composites in Civil Engineering-CICE 2004, Adelaide, Australia, 69-81.
39. Wu, Z. and Yin, J. (2003). "Fracturing behaviors of FRP-strengthened concrete structures", Engineering Fracture Mechanics, 70, 1339-1355.
40. Xiao, J. Z., Li, J. and Zhao, Q. F. (2004). "Experimental study on bond behavior between FRP and concrete", Construction and Building Materials, 18 (10), 745-752.
41. Yao, J., Teng, J. G. and Chen, J. F. (2004). "Experimental study on FRP-to-concrete bonded joints", Composites, Part B: Engineering, 1-15.
42. Yoshizawa, H., Wu, Z., Yuan, H. and Kanakubo, T. (2000). "Study on FRP-concrete interface bond performance", Transactions of JSCE, 49 (662), 105-119.
43. Yokota, M., Shimomura, T., Kamiharako, A. and Maruyama K. (2002). "Influence on mechanical properties of retrofitted member with continuous fiber sheet", Proceedings of the Japan Concrete Institute, 24 (2), 1399-1404. (in Japanese)
44. Yuan, H., Wu, Z. and Yoshizawa, H. (2001). "Theoretical solutions on interfacial stress transfer of externally bonded steel/composite plates." J. Structural. Mech. Earthquake Eng. JSCE, 18(1), 27-39.