Application of factorial and response surface methodology in modern experimental design and optimization

Critical Reviews in Analytical Chemistry

Volumn 36, Issue 3-4, 2006, Pages 141-151

  Hanrahan, Grady ^a   Lu, Kenneth ^a  

^a CALIFORNIA STATE UNIVERSITY   (United States)

Author keywords

Experimental design; Factorial designs; Optimization; Response surface methodology; Screening

Indexed keywords

OPTIMIZATION; SCREENING; SURFACE REACTIONS;

EXPERIMENTAL DESIGN; FACTORIAL DESIGN; RESPONSE SURFACE METHODOLOGY;

CHEMICAL ANALYSIS;

CHEMICAL ANALYSIS; OPTIMIZATION; SCREENING; SURFACE REACTIONS;

EXPERIMENTAL DESIGN; OPTIMIZATION;

EID: 33845456748     PISSN: 10408347     EISSN: 15476510     Source Type: Journal    
DOI: 10.1080/10408340600969478     Document Type: Article

References (73)

1. Myers, R.(1971) Response Surface Methodology. Boston: Allyn and Bacon.
2. Box, G. and Hunter, W. and Hunter, J.(1987) Statistics for Experimenters: An Introduction to Design, Data Analysis and Model Building. New York: Wiley.
3. Deming, S. and Morgan, S.(1993) Experimental Design: A Chemometric Approach. Amsterdam: Elsevier.
4. Brown, S. and Bear, R. (1993) Chemometric techniques in electrochemistry: A critical review Critical Reviews in Analytical Chemistry, 24, pp. 99-131.
5. Goupy, J.(1993) Methods for Experimental Design. Principles and Applications for Physicists and Chemists. Amsterdam: Elsevier.
6. Sundberg, R. (1994) Interpretation of unreplicated two-level factorial experiments, by examples Chemometrics and Intelligent Laboratory Systems, 24, pp. 1-17.
7. Araujo, P. and Brereton, R. (1996) Experimental design. 1. Screening Trends in Analytical Chemistry, 15, pp. 26-31.
8. Lundstedt, T. and Seifert, E. and Abramo, L. and Thelin, B. and Nyström, A. and Pettersen, J. and Bergman, R. (1998) Experimental design and optimization Chemometrics and Intelligent Laboratory Systems, 42, pp. 3-40.
9. Lockmüller, C. and Reese, C. (1998) Introduction to factor analysis Critical Reviews in Analytical Chemistry, 28, pp. 21-49.
10. Massart, D. and Vandeginste, B. and Buydens, L. and de Jong, S. and Lewi, P. and Smeyers-Verbeke, J.(1998) Handbook of Chemometrics and Qualimetrics. Amsterdam: Elsevier.
11. Otto, M.(1999) Chemometrics: Statistics and Computer Applications in Analytical Chemistry. Chichester: Wiley-VCH.
12. Dean, A. and Voss, D.(1999) Design and Analysis of Experiments. New York: Springer.
13. Cox, D. and Reid, N.(2000) Theory of the Design of Experiments. New York: Chapman and Hall.
14. Miller, J. and Miller, J.(2000) Statistics and Chemometrics for Analytical Chemistry, 4th Edition. Englewood Cliffs NJ: Prentice-Hall.
15. Festing, M. (2003) Principles: The need for better experimental design Trends in Pharmacological Sciences, 24, pp. 341-345.
16. Araujo, P. and Brereton, R. (1996) Experimental design. II. Optimization Trends in Analytical Chemistry, 15, pp. 63-70.
17. Hanrahan, G. and Zhu, J. and Gibani, S. and Patil, D.(2005) Chemometrics: Experimental design. In Encyclopedia of Analytical Science. (pp. 8-13). Oxford: Elsevier.
18. Novatná, K. and Havliš, J. and Havel, J. (2005) Optimisation of high performance liquid chromatography separation of neuroprotective peptides. Fractional experimental designs combined with artificial neural networks Journal of Chromatography A, 1096, pp. 50-57.
19. Hanrahan, G. and Tse, F. and Dahdouh, F. and Clarke, K. and Gomez, F.The design and development of a flow injection-capillary electrophoresis (FI-CE) analyzer employing fiber optic detection Journal of Capillary Electrophoresis and Microchip Technology. in press
20. De Coninck, J. and Leclercq, B. and Exbrayat, J. and Duyme, F. (2004) Factorial designs: An efficient approach to choosing the main factors influencing growth and hydrolase production by Tetrahymena thermophila Journal of Industrial Microbiological Technology, 31, pp. 204-208.
21. Halliwell, C. and Cass, A. (2001) A factorial analysis of silanization of conditions for the immobilization of oligonucleotides on glass surfaces Analytical Chemistry, 73, pp. 2476-2483.
22. Silina, Y. and Kuchmenko, T. and Korenman, Y. and Tsivileva, O. and Nikitnina, V. (2005) Use of a complete factorial experiment for designing a gas sensor based on extracts of Pleurotus ostreatus mycelium mushroom Journal of Analytical Chemistry, 60, pp. 759-764.
23. Teofilo, R. and Reis, E. and Reis, C. and da Silva, G. and Kubota, L. (2004) Experimental design employed to square wave voltammetry response optimization for glyphosate determination Journal of the Brazilian Chemical Society, 15, pp. 865-871.
24. Gupte, M. and Kulkarni, P. (2003) A study of antifungal antibiotic production by Thermomonospora sp MTCC 3340 using full factorial design Journal of Chemical Technology and Biotechnology, 78, pp. 605-610.
25. Berkholz, R. and Röhlig, D. and Guthke, R. (2000) Data and knowledge based experimental design for fermentation process optimization Enzyme and Microbial Technology, 27, pp. 784-788.
26. Ehlen, J. and Albers, H. and Breyer, E. (2005) MEKC-LIF of γ-amino butyric acid in microdialysate: Systematic optimization of the separation conditions by factorial analysis Journal of Neuroscience Methods, 147, pp. 36-47.
27. Eon-Duval, A. and Gumbs, K. and Ellett, C. (2003) Precipitation of RNA impurities with high salt in a plasmid DNA purification process: Use of experimental design to determine reaction conditions Biotechnology and Bioengineering, 83, pp. 544-553.
28. Wrobel, G. and Schlingemann, J. and Hummerich, L. and Kramer, H. and Lichter, P. and Hahn, M. (2003) Optimization of high-density cDNA-microarray protocols by design of experiments Nucleic Acids Research, 31, pp. 67-73.
29. Smith, I. and Van, Y. and Chang, Y. (2002) Application of statistical experimental methods to optimize production of poly(γ -glutamic acid) by Bacillus licheniformis CCRC 12826 Enzyme and Microbial Technology, 31, pp. 213-220.
30. Venkata, V. and Panda, T. and Chidambaram, M. (2002) Development of medium for griseofulvin production: Part II. Optimization of medium constituents using central composite design Journal of Microbiology and Biotechnology, 12, pp. 360-366.
31. 3 determination Biosensors and Bioelectronics, 21, pp. 1493-1500.
32. Massumi, A. and Najafi, N. and Barzegari, H. (2002) Speciation of Cr(VI)/ Cr(III) in environmental waters by fluorimetric method using central composite, full and fractional factorial design Microchemical Journal, 72, pp. 93-101.
33. Sanz, J. and de Diego, A. and Raposo, J. and Madariaga, J. (2003) Routine analysis of mercury species using commercially available instrumentation: Chemometric optimization of the instrumental variables Analytica Chimica Acta, 486, pp. 55-267.
34. Salafranca, J. and Domeno, C. and Fernández, C. and Nerín, C. (2003) Experimental design applied to the determination of several contaminants in Duero River by solid-phase microextraction Analytical Chimica Acta, 477, pp. 257-267.
35. Santamaria-Fernández, R. and Moreda-Piñeiro, A. and Hill, S. (2002) Optimization of a multielement sequential extraction method employing an experimental design approach for metal partitioning in soils and sediments Journal of Environmental Monitoring, 4, pp. 330-336.
36. Polettini, A. and Pomi, R. and Sirini, P. (2002) Fractional factorial design to investigate the influence of heavy metals and anions on acid neutralization behavior of cement-based products Environmental Science and Technology, 36, pp. 1584-1591.
37. Ensafi, A. and Khayamian, T. and Atabati, M. (2003) Differential pulse cathodic stripping adsorption voltammetric determination of trace amounts of lead using factorial design for optimization Talanta, 59, pp. 727-733.
38. Tombesi, N. and Freije, R. and Augusto, F. (2004) Factorial experimental design optimization of solid phase microextraction (SPME) conditions for analysis of butylated hydroxytoluene (BHT) in bottled water Journal of the Brazilian Chemical Society, 15, pp. 658-663.
39. Etxebarria, N. and Antolín, R. and Borge, G. and Posada, T. and Raposo, J. (2005) Optimization of flow-injection-hydride generation inductively coupled plasma spectrometric determination of selenium in electrolytic manganese Talanta, 65, pp. 1209-1214.
40. Zougagh, M. and Rudner, P. and de Torres, A. and Pavón, J. (2000) Application of Doehlert matrix and factorial designs in the optimization of experimental variables associated with the on-line preconcentration and determination of zinc by flow injection inductively coupled plasma atomic emission spectrometry Journal of Analytical and Atomic Spectroscopy, 15, pp. 1589-1594.
41. Vlyssides, A. and Arapoglou, D. and Israilides, C. and Barampouti, E. and Mai, S. (2004) Electrochemical treatment of methyl parathion based on the implementation of a factorial design Journal of Applied Electrochemistry, 34, pp. 1265-1269.
42. Tarley, C. and Figueiredo, E. and Matos, G. (2005) Thermospray flame furnace-AAS determination of copper after on-line sorbent preconcentration using a system optimized by experimental designs Analytical Sciences, 21, pp. 1337-1342.
43. Jurado-González, J. and Galindo-Riaño, M. and García-Vargas, M. (2003) Factorial designs applied to the development of a capillary electrophoresis method for the analysis of zinc, sodium, calcium and magnesium in water samples Talanta, 59, pp. 775-783.
44. El Hourch, M. and Dudoit, A. and Amiard, J.-C. (2004) An optimization procedure for determination of metallothionein by square wave cathodic stripping voltammetry: Application to marine worms Analytical and Bioanalytical Chemistry, 378, pp. 776-781.
45. Domínguez, O. and Asunción, M. and Arcos, M. (2002) Application of an optimization procedure in adsorptive stripping voltammetry for the determination of chromium with ammonium pyrrolidine dithiocarbamate Electroanalysis, 14, pp. 1083-1089.
46. Prado, C. and Garrido, J. and Periago, J. (2004) Urinary benzene determination by SPME/GC-MS. A study of variables by fractional factorial design and response surface methodology Journal of Chromatography B, 804, pp. 255-261.
47. Akesolo, U. and Maguregui, M. and González, L. and Jiménez, R. and Alonso, R. (2004) Experimental design optimization of a capillary zone electrophoresis method for the screening of several diuretics and ACE inhibitors Journal of Chromatographic Science, 42, pp. 74-79.
48. Cagigal, E. and González, L. and Alonso, R. and Jiménez, R. (2001) Experimental design methodologies to optimize the spectrofluorimetric determination of Losartan and Valsartan in human urine Talanta, 54, pp. 1121-1133.
49. Bloomfield, M. and Butler, W. (2000) Robustness testing, using experimental design, of a flow-through dissolution method for a product where the actives have markedly differing solubility properties International Journal of Pharmaceutics, 206, pp. 55-61.
50. Gotti, R. and Furlanetto, S. and Andrisano, V. and Cavrini, V. and Pinzauti, S. (2000) Design of experiments for capillary electrophoretic enantioresolution of salbutamol using dermatan sulfate Journal of Chromatography A, 875, pp. 411-422.
51. Billon, A. and Bataille, B. and Cassanas, G. and Jacob, M. (2000) Development of spray-dried acetaminophen microparticles using experimental designs International Journal of Pharmaceutics, 203, pp. 159-168.
52. Kuentz, M. and Röthlisberger, D. (2002) Determination of the optimal amount of water in liquid-fill masses of hard gelatin capsules by means of texture analysis and experimental designs International Journal of Pharmaceutics, 236, pp. 145-152.
53. Klous, M. and Nuijen, B. and Van den Brink, W. and Van Ree, J. and Beijnen, J. (2004) Process characterisation, optimisation and validation of production of diacetylmorphine/caffeine sachets: A design of experiments approach International Journal of Pharmaceutics, 285, pp. 65-75.
54. El-Samaligy, M. and Afifi, N. and Mahmound, E. (2006) Increasing bioavailability of silymarin using buccal liposomal delivery system: Preparation and experimental design investigation International Journal of Pharmaceutics, 308, pp. 140-148.
55. Corti, G. and Maestreli, F. and Cirri, M. and Furlanetto, S. and Mura, P. (2006) Development and evaluation of an in vitro method for prediction of human drug absorption I. Assessment of artificial membrane composition European Journal of Pharmaceutical Sciences, 27, pp. 346-353.
56. Chen, J.-G. and Glancy, K. and Chen, X. and Alasandro, M. (2001) Investigation of pharmaceutical high-performance liquid chromatography assay bias using experimental design Journal of Chromatography A, 917, pp. 63-73.
57. Furlanetto, S. and Cirri, M. and Maestrelli, F. and Corti, G. and Mura, P. (2006) Study of formulation variables influencing the drug release rate from matrix tablets by experimental design European Journal of Pharmaceutics and Biopharmaceutics, 62, pp. 77-84.
58. Gooding, O. (2004) Process optimization using combinatorial design principles: Parallel synthesis and design of experiment methods Current Opinion in Chemical Biology, 8, pp. 297-304.
59. Rambali, B. and Baert, L. and Thoné, D. and Massart, D. (2001) Using experimental design to optimize the process parameters in fluidized bed granulation Drug Development and Industrial Pharmacy, 27, pp. 47-55.
60. Guervenou, J. and Giamarchi, P. and Coulouarn, C. and Guerda, M. and Le Lez, C. and Oboyet, T. (2002) Experimental design methodology and data analysis technique applied to optimize an organic synthesis Chemometrics and Intelligent Laboratory Systems, 63, pp. 81-89.
61. Torchio, M. and Santarelli, M. and Nicali, A. (2005) Experimental analysis of the CHP performance of a PEMFC stack by a 24 factorial design Journal of Power Sources, 149, pp. 33-43.
62. Lai, M.-H. and Chang, Y.-N. and Wang, C.-M. and Wu, H. and Chung, T.-W. (2003) Analysis of the absorption-dehumidification process variables using the experimental design methodology Separation Science and Technology, 38, pp. 2447-2464.
63. 5 electrodes Electrochimica Acta, 45, pp. 4351-4358.
64. Nidola, A.(1981) Electrodes of Conductive Metallic Oxides, Part B. Amsterdam: Elsevier.
65. Rueda, M. and Sarabia, L. and Herrero, A. and Ortiz, M. (2003) Optimisation of a flow injection system with electrochemical detection using the desirability function. Application to the determination of hydroquinone in cosmetics Analytica Chimica Acta, 479, pp. 173-184.
66. Santelli, R. and de Almeida Bezerra, M. and de SantAna, O. and Cassella, R. and Ferreira, S. (2006) Multivariate technique for optimization of digestion procedure by focused microwave system for determination of Mn, Zn and Fe in food samples using FAAS Talanta, 68, pp. 1083-1088.
67. Fugit, J.-L. and Taverdet, J.-L. and Gauvrit, J.-V. and Lanteri, P. (2003) Treatment of plasticized PVC to reduce plasticizer/solvent migration: Optimization with an experimental design Polymer International, 52, pp. 670-675.
68. Saccani, G. and Tanzi, E. and Mallozzi, S. and Cavalli, S. (2005) Determination of niacin in fresh and dry cured pork products by ion chromatography: Experimental design approach for the optimization of nicotinic acid separation Food Chemistry, 92, pp. 373-379.
69. Mac Namara, K. and Leardi, R. and Sabuneti, A. (2005) Fast GC analysis of major volatile compounds in distilled alcoholic beverages. Optimisation of injection and chromatographic conditions Analytica Chimica Acta, 542, pp. 260-267.
70. Naik, P. and Reddy, P. and Misra, V. (2004) Optimization of coal flotation using statistical technique Fuel Processing Technology, 85, pp. 1473-1485.
71. Muthukumar, M. and Mohan, D. (2004) Optimization of mechanical properties of polymer concrete and mix design recommendation based on design of experiments Journal of Applied Polymer Science, 94, pp. 1107-1116.
72. Rodriguez-Nogales, J. and Garcia, M. and Marina, M. (2006) Monolithic supports for the characterization of commercial maize products based on their chromatographic profile. Application of experimental design and classification techniques Journal of Agricultural and Food Chemistry, 54, pp. 1173-1179.
73. Acikalin, K. and Karaca, F. and Bolat, E. (2005) Central composite rotatable design for liquefaction of pine barks Fuel Processing Technology, 87, pp. 17-24.