Strength improvement of critical-sized three dimensional printing parts by infiltration of solvent-free visible light-cured resin

Journal of Materials Science: Materials in Medicine

Volumn 17, Issue 12, 2006, Pages 1383-1391

  Suwanprateeb, J ^a  

^a NATIONAL METAL AND MATERIALS TECHNOLOGY CENTER   (Thailand)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING STRENGTH; CURING; INFILTRATION; SOLVENTS; TOXICITY; VISIBILITY;

CURING CONDITIONS; FLEXURAL STRAIN; THREE DIMENSIONAL PRINTING (3DP); VISIBLE LIGHT CURING UNIT (VLC);

NATURAL POLYMERS;

HALOGEN; POLY(METHYL METHACRYLATE); POLYMER; RESIN; SEALANT;

ANIMAL CELL; BIOMECHANICS; CONFERENCE PAPER; CONTROLLED STUDY; CYTOTOXICITY TEST; HEAT TREATMENT; MECHANICAL STRESS; MOUSE; NONHUMAN; PRINTING; PRIORITY JOURNAL; STRENGTH; WATER ABSORPTION;

ACRYLIC RESINS; LIGHT; MATERIALS TESTING; PRINTING; SOLVENTS;

EID: 33845412261     PISSN: 09574530     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10856-006-0614-8     Document Type: Conference Paper

References (32)

1. P. POTAMIANOS, A. A. AMIS, A. J. FORESTER, M. MCGURK and M. BIRCHER, Proc. Instn. Mech. Engrs. 212 (1998) 383.
2. H. JEE and E. SACHS, Rapid Prototyping J. 6(1) (2000) 50.
3. B. SANGHERA, S. NAIQUE, Y. PAPAHARILAOU and A. AMES, Rapid Prototyping J. 7(5) (2001) 275.
4. P. ORIS, K. SITTHISERIPRATIP, J. SUWANPRATEEB and J. V. SLOTEN, in Proceedings of the 2nd Inter Conf on Rapid Prototyping and Manufacturing (ICRPM 2002 Beijing), Beijing, China, 2002.
5. M. N. COOKE, J. P. FISHER, D. DEAN, C. RIMNAC and A. G. MIKOS, J. Biomed. Mater. Res.: Part B Appl. Biomater. 64B (2002) 65.
6. I. ZEIN I , D. W. HUTMACHER, K. C. TAN and S. H. TEOH, Biomaterials 23 (2002) 1169.
7. K. H. TAN, C. K. CHUA, K. F. LEONG, C. M. CHEAH, P. CHEANG, M. S. BAKAR ABU and S. W. CHA, Biomaterials 24 (2003) 3115.
8. J. T. RIMELL and P. M. MARQUIS, J. Biomed. Mater. Res.: Part B Appl. Biomater. 53 (2000) 414.
9. L. G. GRIFFITH, B. M. WU, M. J. CIMA, M. J. POWERS, B. CHAIGNAUD and J. P. VACANTI, Ann. NY Acad. Sci. 831 (1992) 382.
10. B. M. WU, S. W. BORLAND, R. A. GIORDANO, L. G. CIMA, E. M. SACHS and M. J. CIMA, J. Control. Release 40 (1996) 77.
11. A. PARK, B. WU and L. G. GRIFFITH, J. Biomater. Sci.-Polym. E9 (1998) 89.
12. S. S. KIM, H. UTSUNOMIYA, J. A. KOSKI, B. M. WU, M. J. CIMA, J. SOHN, M. MUKAI, L. G. GRIFFITH and J. P. VACANTI, Ann. Surg. 228 (1998) 8.
13. R. A. GIORDANO, B. M. WU, S. W. BORLAND, L. G. CIMA, E. M. SACHS and M. J. CIMA, J. Biomat. Sci.-Polym. E8 (1996) 63.
14. W. S. KOEGLER, C. PATRICK, M. J. CIMA and L. G. GRIFFITH, J. Biomed. Mater. Res. 63 (2002) 567.
15. C. X. F. LAM, X. M. MO, S. H. TEOH and D. W. HUTMACHER, Mater. Sci. and Eng.: Part C 20 (2002) 49.
16. M. USTA, D. L. PIECH, R. K. MACCRONE and W. B. HILLIG, Biomaterials 24 (2003) 165.
17. K. S. TENHUISEN ana P. W. BROWN, J. Biomed. Mater. Res. 28 (1994) 27.
18. M. E. GOMES, J. S. GODINHO, D. TCHALAMOV, A. M. CUNHA and R. L. REIS, Mater. Sci. Eng.:Part C 20 (2002) 19.
19. A. P. MARQUESA, R. L. REIS and J. A. HUNT, Biomaterials 23 (2002) 1471.
20. S. C. MENDES, R. L. REIS, Y. P. BOVELL, A. M. CUNHA, C. A. VAN BLITTERSWIJK and J. D. DE BRUIJN, Biomaterials 22 (2001) 2057.
21. I. LEVY, T. PALDI and O. SHOSEYOV, Biomaterials 25 (2004) 1841.
22. S. NAZZAL, M. NUTAN, A. PALAMAKULA, R. SHAH, A. A. ZAGHLOUL and M. A. KHAN, Inter. J. Pharma. 240 (2002) 103.
23. T. A. ROBERTS and D. J. SHAW, J. Dent. Res. 63 (1984) 293.
24. C. PIANELLI, J. DEVAUX, S. BEBELMAN and G. LELOUP, J. Biomed. Mater. Res. (Appl Biomater) 48 (1999) 675.
25. Z 400 System User Manual. Z Corporation; 2004.
26. K. FUJIMURA, K. BESSHO, Y. OKUBO, N. SEGAMI and T. IIZUKA, Clin. Oral Implants Res. 14 (2003) 659.
27. N. MOSZNER and U. SALZ, Prog. Polym. Sci. 26 (2001) 535.
28. B. RATNER, A. S. HOFFMAN, F. J. SCHOEN and J. E. LEMONS, "Biomaterials science: An introduction to materials in medicine" (Academic Press, San Diego, 1996).
29. M. A. LOZA-HERRERO, F. A. RUEGGEBERG, W. F. CAUGHMAN, G. S. SCHUSTER, C. A. LEFEBVRE and F. M. GARDNER, J. Dent. Res. 77(2) (1998) 426.
30. J. BLACK and G. HASTINGS, "Handbook of biomaterial properties" (Chapman & Hall, London, 1998).
31. ASTM F755-99e1 Standard specification for selection of porous polyethylene for use in surgical implants. ASTM International.
32. P. VAN LANDUYT, B. PETER, L. BELUZE and J. LEMAITRE, Bone 25 (1999) 95s.