Occurrence of microelastohydrodynamic lubrication in simple sliding motion with transverse roughness

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 220, Issue 3, 2006, Pages 273-285

  Wang, J ^a   Kaneta, M ^a   Guo, F ^b   Yang, P ^b  

^a KYUSHU INSTITUTE OF TECHNOLOGY   (Japan)

^b QINGDAO TECHNOLOGICAL UNIVERSITY   (China)

Author keywords

Elastohydrodynamic lubrication; Point contact; Surface roughness; Thermal effect

Indexed keywords

FLOW OF FLUIDS; POINT CONTACTS; RHEOLOGY; SLIDING MODE CONTROL; SURFACE ROUGHNESS; THERMAL EFFECTS;

FLUID FLOW MODELS; ISOTHERMAL EYRING MODELS; OIL FILMS; TRANSVERSE ROUGHNESS;

ELASTOHYDRODYNAMIC LUBRICATION;

ELASTOHYDRODYNAMIC LUBRICATION; FLOW OF FLUIDS; POINT CONTACTS; RHEOLOGY; SLIDING MODE CONTROL; SURFACE ROUGHNESS; THERMAL EFFECTS;

EID: 33751269989     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/13506501JET142     Document Type: Conference Paper

References (49)

1. Grubin, A. N. and Vinogradova, I. E. Investigation of the contact of machine components, 1949, Book no. 30 (Central Scientific Research Institute for Technology and Mechanical Engineering, Moscow).
2. Dowson, D. and Higginson, G. R. Elastohydrodynamic lubrication, the fundamentals of rollers and gears lubrication, 1966 (Pergamon, Oxford).
3. Ranger, A. P., Ettles, C. M. M., and Cameron, A. The solution of the point contact elastohydrodynamic problem. Proc. R. Soc. (Lond.) Ser. A, 1975, 346, 227-244.
4. Hamrock, B. J. and Dowson, D. Isothermal elasto-hydrodynamic lubrication of point contacts, part I -theoretical formulation. Trans. ASME J. Lubr. Technol., 1976, 98, 223-229.
5. Hamrock, B. J. and Dowson, D. Isothermal elstohydro-dynamic lubrication of point contacts, part II - ellipticity parameter results. Trans. ASME J. Lubr. Technol., 1976, 98, 375-383.
6. Hamrock, B. J. and Dowson, D. Isothermal elstohydrodynamic lubrication of point contacts, part III - fully flooded results. Trans. ASME J. Lubr. Technol., 1977, 99, 264-276.
7. Hamrock, B. J. and Dowson, D. Isothermal elstohydrodynamic lubrication of point contacts, part IV - star-vation results. Trans. ASME J. Lubr. Technol., 1977, 99, 15-23.
8. Chittenden, R. J., Dowson, D., Dunn, J. F., and Taylor, C. M. A theoretical analysis of the isothermal elastohydrodynamic lubrication of concentrated contacts, I. Direction of lubrication entrainment coincident with the major axis of the Hertzian contact ellipse. Proc. R. Soc. (Lond.) Ser. A, 1985, 397, 245-269.
9. Chittenden, R. J., Dowson, D., Dunn, J. F., and Taylor, C. M. A theoretical analysis of the isothermal elastohydrodynamic lubrication of concentrated contacts, II. General case, with lubricant entrainment along either principal axis of the Hertzian contact ellipse or at some intermediate angle. Proc. R. Soc. (Lond.) Ser. A, 1985, 397, 271-294.
10. Lubrecht, A. A. Numerical solution of the EHL line and point contact problem using multigrid techniques. PhD Thesis, Twente University, Enschede, The Netherlands, 1987.
11. Venner, C. H. Multilevel solution of the EHL line and point contact problems. PhD Thesis, Twente University, Enschede, The Netherlands, 1991.
12. Sadeghi, F. and Sui, P. C. Thermal elastohydrodynamic lubrication of rolling/sliding contacts. Trans. ASME J. Tribol., 1990, 112, 189-195.
13. Lee, R. T. and Hsu, C. H. A fast method for the analysis of thermal elastohydrodynamic lubrication of rolling/ sliding line contacts. Wear, 1993, 166, 107-117.
14. Bruggemann, H. and Kollmann, F. G. A numerical solution of the thermal elastohydrodynamic lubrication in an elliptical contact. Trans. ASME J. Lubr. Technol., 1982, 104, 392-400.
15. Zhu, D. and Wen, S. A full numerical solution of the thermal elastohydrodynamic lubrication problem of elliptic contacts. Trans. ASME J. Tribol, 1984, 106, 246-254.
16. Blahey, A. G. and Schneider, G. E. A. Numerical solution of the elastohydrodynamic lubrication of elliptical contacts with thermal effects. In Fluid film lubrication - Osborne Reynolds centenary. Proceedings of the 13th Leeds-Lyon Symposium on Tribology (Eds D. Dowson et al.), 1986 (Elsevier, Amsterdam).
17. Lee, R. T., Hsu, C. H., and Kuo, W. F. Multilevel solution for thermal elastohydrodynamic point contacts. Tribol. Int., 1995, 28, 541-552.
18. Kim, K. H. and Sadeghi, F. Three-dimensional temperature distribution in EHD lubrication: part II -point contact and numerical formulation. Trans. ASME J. Tribol., 1993, 115, 36-45.
19. Qu, S., Yang, P., and Guo, F. Theoretical investigation on the dimple occurrence in the thermal EHL of simple sliding steel-glass circular contacts. Tribol. Int., 2000, 33, 59-65.
20. Yang, P., Qu, S., Kaneta, M., and Nishikawa, H. Formation of steady dimples in point TEHL contacts. Trans. ASME J. Tribol., 2001, 123, 40-49.
21. Guo, F., Yang, P., and Qu, S. On the theory of thermal elastohydrodynamic lubrication at high slide-roll ratios - circular glass-steel contact solution at opposite sliding. Trans. ASME J. Tribol., 2000, 123, 816-821.
22. Kaneta, M. and Yang, P. Formation mechanism of steady multi-dimples in thermal EHL point contacts. Trans. ASME J. Tribol., 2003, 125, 241-251.
23. Kaneta, M., Nishikawa, H., Kameishi, H., and Sakai, T. Effects of elastic moduli of contact surfaces in elasto-hydrodynamic lubrication. Trans. ASME J. Tribol., 1992, 114, 75-80.
24. Kaneta, M., Nishikawa, H., Kanada, T., and Matsuda, K. Abnormal phenomena appearing in EHL contacts. Trans. ASMEJ. Tribol., 1996, 118, 886-892.
25. Kaneta, M., Shigeta, T., and Yang, P. Effects of compressive heating on traction force and film thickness in point EHL contact. Trans. ASME J. Tribol., 2005, 127, 435-442.
26. Wedeven, L. D. and Cusano, C. Elastohydrodynamic film thickness measurements of artificially produced surface dents and grooves. Trans. ASLE, 1979, 22, 369-381.
27. Kaneta, M. and Cameron, A. Effects of asperities in elastohydrodynamic lubrication. Trans. ASME J. Lubr. Technol., 1980, 102, 779-784.
28. Kaneta, M., Sakai, T., and Nishikawa, H. Optical interferometric observation of the effects of a bump on point contact EHL. Trans. ASME J. Tribol., 1992, 114, 779-784.
29. Kaneta, M., Sakai, T., and Nishikawa, H. Effects of surface roughness on point contact EHL. Trans. STLE, 1993, 36(4), 605-612.
30. Guangteng, G., Cann, P. M., Olver, A. V., and Spikes, H. A. Lubricant film thickness in roughness surface, mixed elastohydrodynamic contact. Trans. ASME J. Tribol., 2000, 122, 65-75.
31. Choo, J. W., Glovnea, R. P., Olver, A. V., and Spikes, H. A. The effects of three-dimensional model surface roughness features on lubricant film thickness in EHL contacts. Trans. ASME J. Tribol., 2003, 125, 533-542.
32. Goglia, P. R., Cusano, C., and Conry, T. F. The effects of surface irregularities on the elastohydrodynamic lubrication of sliding line contacts. Part I: single irregularities. Trans. ASME J. Tribol., 1984, 106, 104-112.
33. Goglia, P. R., Cusano, C., and Conry, T. F. The effects of surface irregularities on the elastohydrodynamic lubrication of sliding line contacts. Part II: wavy surfaces. Trans. ASME J. Tribol., 1984, 106, 113-119.
34. Lubrecht, A. A., Ten Napel, W. E., and Bosma, R. The influence of longitudinal and transverse roughenss on the elastohydrodynamic lubrication of circular contacts. Trans. ASME J. Tribol., 1988, 110, 421-426.
35. Kweh, C. C., Evans, H. P., and Snidle, R. W. Micro-elastohydrodynamic lubrication of an elliptical contact with transverse and three-dimensional roughness. Trans. ASME J. Tribol., 1989, 111, 577-583.
36. Holmes, M. J. A., Evans, H. P., and Snidle, R. W. Analysis of mixed lubrication effects in simulated gear tooth contacts. Trans. ASME J. Tribol., 2005, 127, 61-69.
37. Venner, C. H., Couhier, F., Lubrecht, A. A., and Greenwood, J. A. Amplitude reduction of waviness in transient EHL line contacts. In Elastohydrodynamics '96: fundamentals and applications in lubrication and traction. Proceedings of the 23rd Leeds-Lyon Symposium on Tribology (Eds D. Dowson et al), 1997, pp. 103-112 (Elsevier, Amsterdam).
38. Lubrecht, A. A., Graille, D., Venner, C. H., and Greenwood, J. A. Waviness amplitude reduction in EHL line contacts under rolling-sliding. Trans. ASME J. Tribol., 1998, 120, 705-709.
39. Hooke, C. J. Surface roughness modification in EHL line contacts - the effect of roughness wavelength, orientation and operating conditions. In Lubrication at the fronties: the role of the interface and surface layer in the thin film and boundary regime. Proceedings of the 25th Leeds-Lyon Symposium on Tribology (Eds D. Dowson et al.), 1998, pp. 193-202 (Elsevier, Amsterdam).
40. Hooke, C. J. The behaviour of low-amplitude surface roughness under line contacts: non-Newtonian fluids. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2000, 214, 253-265.
41. Chang, L., Cusano, C., and Corny, T. F. Effects of lubricant rheology and kinematic conditions on micro-elastohydrodynamic lubrication. Trans. ASME J. Tribol., 1989, 111, 344-351.
42. Ghang, L. and Zhao, W. Fundamental differences between Newtonian and non-Newtonian micro-EHL results. Trans. ASME J. Tribol., 1995, 117, 29-35.
43. Fang, N., Chang, L., and Johnston, G. J. Some insights into micro-EHL pressures. Trans. ASME J. Tribol., 1999, 121, 473-480.
44. Sadeghi, F. and Kim, K. Effects of a single bump or dent in time dependent thermal line EHD lubrication. Trans. ASME J. Tribol., 1994, 116, 9-20.
45. Xu, G. and Sadeghi, F. Thermal analysis of circular contacts with measured roughness. Trans. ASME J. Tribol., 1996, 113, 473-483.
46. Cui, J. and Yang, P. Transient thermo-EHL theory of point contact - the process of a bump on the fast surface passing a pump on the slower surface. In Transient Process in Tribology, Proceedings of the 30th Leeds-Lyon Symposium on Tribology (Eds G. Dalmaz et al.), Lyon, 2003, 2004, pp. 253-261 (Elsevier, Amsterdam).
47. Yang, P. and Wen, S. A generalized Reynolds equation for non-Newtonian thermal elastohydrodynamic lubrication. Trans. ASME J. Tribol., 1990, 112, 631-636.
48. Roelands, C. J. A. Correctional aspects of the viscosity-temperature- pressure relationship of lubricating oils. PhD Thesis, Delft University of Technology, The Netherlands, 1966.
49. Yang, P. and Rodkiewicz, C. M. On the numerical analysis to the thermal elastohydrodynamic lubrication of a tilting pad inclusive of side leakage. Trans. STLE, 1992, 40, 259-266.