Determination of dynamic and sliding friction, and observation of stick-slip phenomenon on compacted polymer powders during high-velocity compaction

Polymer Testing

Volumn 25, Issue 8, 2006, Pages 1069-1080

  Azhdar, Bruska ^a   Stenberg, Bengt ^a   Kari, Leif ^a  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

Frictional force; High velocity compaction; Opposite velocity; Relaxation assist; Sliding coefficient; Stick slip phenomenon

Indexed keywords

DIES; ELASTICITY; FRICTION; PRESSURE EFFECTS;

FRICTIONAL FORCE; HIGH-VELOCITY COMPACTION; OPPOSITE VELOCITY; RELAXATION ASSIST; SLIDING COEFFICIENT; STICK-SLIP PHENOMENON;

POLYMERIZATION;

EID: 33750942720     PISSN: 01429418     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymertesting.2006.07.009     Document Type: Article

References (64)

1. Azhdar B., Stenberg B., and Kari L. Development of a High-Velocity Compaction process for polymer powders. Polymer Testing 24 7 (2005) 909-919
2. Bigg D.M. A Study of the Effect of Pressure, Time, and Temperature on High-Pressure Powder Molding. Polymer Engineering and Science 17 9 (1977) 691-699
3. Crawford R.J., and Paul D.W. Cold compaction of polymeric powders. Journal of Materials Science 17 8 (1982) 2267-2280
4. Sanchez-Castillo F.X., Anwar J., and Heyes D.M. Molecular dynamics simulations of granular compaction: the single granule case. Journal of Chemical Physics 118 10 (2003) 4636-4648
5. Canta T., and Frunza D. Friction-assisted pressing of PM components. Journal of Materials Processing Technology 143-144 (2003) 645-650
6. Cameron I.M., Gethin D.T., and Tweed J.H. Friction measurement in powder die compaction by shear plate technique. Powder Metallurgy 45 4 (2002) 345-353
7. Sarumi M.A., and Al-Hassani S.T.S. High and low strain rate properties of powders for continuum analysis. Powder Technology 65 1-3 (1991) 51-59
8. Niesz D.E. A review of ceramic powder compaction. Kona 14 (1996) 44-51
9. Skagerstrand A. High velocity compaction of metal powders, a study on density and properties. Advances in Powder Metallurgy & Particulate Materials (2002) 4/111-4/117
10. Skoglund P., Kejzelman M., and Hauer I. High density PM components by high velocity compaction. Advances in Powder Metallurgy & Particulate Materials (2002) 4/85-4/95
11. Sinka I.C., Cunningham J.C., and Zavaliangos A. The effect of wall friction in the compaction of pharmaceutical tablets with curved faces: a validation study of the Drucker-Prager Cap model. Powder Technology 133 1-3 (2003) 33-43
12. Michrafy A., Dodds J.A., and Kadiri M.S. Wall friction in the compaction of pharmaceutical powders: measurement and effect on the density distribution. Powder Technology 148 1 (2004) 53-55
13. Kim H., Venkatesh G., and Fassihi R. Compactibility characterization of granular pectin for tableting operation using a compaction simulator. International Journal of Pharmaceutics 161 2 (1998) 149-159
14. Yliruusi J.K., and Antikainen O.K. New parameters derived from tablet compression curves. Part I. Force-time curve. Drug Development and Industrial Pharmacy 23 1 (1997) 69-79
15. Klemm U., et al. Friction measurements during dry compaction of silicon carbide. Journal of the European Ceramic Society 17 2-3 (1997) 141-145
16. Al-Hassani S.T.S., Tennant P.W., and Sarumi M.A. Stress wave method for measuring elastic moduli of powder compacts in tension and compression. Powder Metallurgy 32 3 (1989) 204-208
17. Briscoe B.J., and Rough S.L. The effects of wall friction on the ejection of pressed ceramic parts. Powder Technology 99 3 (1998) 228-233
18. Neergaard L.J., and Nawaz M.B. Dry-pressing behavior of silicone-coated alumina powders. Powder Technology 98 2 (1998) 104-108
19. Ewsuk K.G., et al. Characterizing powders for dry pressing, sintering. American Ceramic Society Bulletin 82 5 (2003) 41-47
20. Spencer R.S., Gilmore G.D., and Wiley R.M. Behavior of granulated polymers under pressure. Journal of Applied Physics 21 (1950) 527-531
21. Briscoe B.J., and Evans P.D. Wall friction in the compaction of agglomerated ceramic powders. Powder Technology 65 1-3 (1991) 7-20
22. Skrinjar O., and Larsson P.-L. Cold compaction of composite powders with size ratio. Acta Materialia 52 7 (2004) 1871-1884
23. Cunningham J.C., Sinka I.C., and Zavaliangos A. Analysis of tablet compaction. I. Characterization of mechanical behavior of powder and powder/tooling friction. Journal of pharmaceutical sciences 93 8 (2004) 2022-2039
24. Kadiri M.S., Michrafy A., and Dodds J.A. Pharmaceutical powders compaction: Experimental and numerical analysis of the density distribution. Powder Technology 157 1-3 (2005) 176-182
25. Landry J.W., and Grest G.S. Granular packings with moving side walls. Physical Review E: Statistical, Nonlinear, and Soft Matter Physics 69 3-1 (2004) 031303/1-031303/9
26. Sanchez-Castillo F.X., Anwar J., and Heyes D.M. Mol. dynamics simulations of granular compaction. Chemistry of Materials 15 18 (2003) 3417-3430
27. Wensrich C. Dissipation, dispersion, and shocks in granular media. Powder Technology 126 1 (2002) 1-12
28. Cameron I.M., and Gethin D.T. Exploration of die wall friction for powder compaction using a discrete finite element modeling technique. Modelling and Simulation in Materials Science and Engineering 9 4 (2001) 289-307
29. Guyoncourt D.M.M., et al. Measurement of friction for powder compaction modeling-comparison between laboratories. Powder Metallurgy 43 4 (2000) 364-374
30. Zhang Q., et al. Atomic simulations of kinetic friction and its velocity dependence at Al/Al and a-Al2O3/a-Al2O3 interfaces. Physical Review B: Condensed Matter and Materials Physics 72 4 (2005) 045406/1-045406/12
31. Vieth S., et al. Effect of surface silanization on the dry pressing behavior of silicon nitride powder. Journal of the European Ceramic Society 23 12 (2003) 1997-2004
32. Isherwood D.P. Some observations on die wall friction effects on the compaction of polymers. Powder Technology 48 3 (1986) 253-262
33. Mani S., Tabil L.G., and Sokhansanj S. An overview of compaction of biomass grinds. Powder Handling & Processing 15 3 (2003) 160-168
34. Briscoe B.J., and Oezkan N. Compaction behavior of agglomerated alumina powders. Powder Technology 90 3 (1997) 195-203
35. Crawford R.J. Effect of Compaction Rate During the Cold Forming of Polymeric Powder. Polymer Engineering and Science 22 5 (1982) 300-306
36. Crawford R.J., Cumberland D.J., and Keating T.G. Design of a Multi-Spring Floating Die Compaction System for Plastic Powders. Journal of Testing and Evaluation 17 6 (1989) 344-356
37. Crawford R.J., and Paul D.W. Radial and Axial Die Pressures During Solid-Phase Compaction of Polymeric Powders. European Polymer Journal 17 10 (1981) 1023-1028
38. Jog J.P. Solid-State Processing of Polymers-a Review. Advances in Polymer Technology 12 3 (1993) 281-289
39. Crawford R.J., and Paul D.W. Pressures Transmitted through Polymeric Powders Subjected to Solid-Phase Compaction. Polymer 21 2 (1980) 138-139
40. Spalding M.A., Hyun K.S., and Hughes K.R. Stress distribution in solid polymer compacts. Journal of Reinforced Plastics and Composites 16 13 (1997) 1231-1241
41. James M.B., and Newton J.M. The determination of the coefficient of dynamic friction of organic powder compacts on steel. Powder Technology 34 1 (1983) 29-37
42. Crawford R.J., Paul D.W., and Sprevak D. Solid phase compaction of polymeric powders. Effects of compaction conditions on pressure and density variations. Polymer 23 1 (1982) 123-128
43. Briscoe B.J., and Rough S.L. The effects of wall friction in powder compaction. Colloids and Surfaces, A: Physicochemical and Engineering Aspects 137 1-3 (1998) 103-116
44. Roure S.B., Bouvard D., Dorémus P., and Pavier E. Analysis of die compaction of tungsten carbide and cobalt powder mixtures. Powder Metallurgy 42 2 (1999) 164-170
45. Ballhausen C. Contribution to theoretical and practical aspects of compressing powders. Archiv fuer das Eisenhuettenwesen 22 5-6 (1951) 185-196
46. Gasiorek S., and Korczak K.Z. Cohesiveness of a compact. Advances in Powder Metallurgy 1 (1990) 287-294
47. Korczak K.Z., and Gasiorek S. Compacting lubrication for metal powders. Advances in Powder Metallurgy 1 (1990) 279-286
48. Gasiorek S., Korczak K.Z., and Kaminski K.K. Compressibility of metal powders. Advances in Powder Metallurgy 1 (1989) 53-61
49. Korczak K.Z., Gasiorek S., and Kaminski K.K. New approach for testing and evaluation of ceramic and metallic powders compressibility. Advances in Powder Metallurgy 1 (1989) 75-84
50. Gasiorek S., Maciejko K., and Szatkowska J. Mathematical description of the process of compacting ceramic powders. Materials Science Monographs 6 Energy Ceram. (1980) 223-236
51. Gasiorek S. Shrinkage as a result of the density and mass changes during sintering process. Science of Ceramics 10 (1980) 311-319
52. Izak P. Allgemeines modell zur verdichtung granulierter keramischer pulver Generalised model for densification of granulated ceramic powders. Keramische Zeitschrift 53 10 (2001) 912-915
53. G.K. McMillan, D.M. Considine, Process/Industrial Instruments and Controls Handbook (5th Edition). 1999: McGraw-Hill. 1200 PP.
54. Ibos L., et al. Thermal behavior of ferroelectric polyamide 11 in relation to pyroelectric properties. Journal of Polymer Science, Part B: Polymer Physics 37 7 (1999) 715-723
55. Relly J.J., and Kamel I.L. Characterization and Cold Compaction of Polyether-etherketone Powders. Polymer Engineering and Science 29 20 (1989) 1456-1465
56. Den Hartog J.P. Mechanical vibrations (1985), Dover Publications 436 PP
57. Ernest Rabinowicz. Friction and wear of materials. 2nd Edition (1995) 315 PP
58. Bowden F.P., and Tabor D. The friction and lubrication of solids (2001), Clarendon Press 374 PP
59. Tabata T., Masaki S., and Kamata K. Coefficient of friction between metal powder and die-wall during compaction. Powder Metallurgy International 13 4 (1981) 179-182
60. Gethin D.T., et al. An investigation of powder compaction processes. International Journal of Powder Metallurgy (Princeton, New Jersey) 30 4 (1994) 385-398
61. Coube O., and Brewin P. Modelling and numerical simulation of powder compaction. Powder Metallurgy 45 1 (2002) 18-19
62. Lung C.Y., et al. Development of a powder warming compacting machine with an electrical heating system. Powder Technology 127 3 (2002) 267-273
63. Mosbah P., Bouvard D., Ouedraogo E., and Sutz P. Experimental techniques for analysis of die pressing and ejection of metal powder. Powder Metallurgy 40 4 (1997) 269-277
64. Azhdar B., Stenberg B., and Kari L. Determination of springback gradient in the die on compacted polymer powders during high-velocity compaction. Polymer Testing 25 1 (2006) 114-123